Geri Dön

Sürekli elyaf takviyeli termoplastik kompozit malzeme esaslı çok hafif sandviç plakların sonlu elemanlar analiz yöntemi ve deneysel olarak incelenmesi

Finite element analysis and experimental investigation of continuous filament thermoplastic composite material based ultra- lightweight sandwich plates

  1. Tez No: 693511
  2. Yazar: ASLIHAN HAYIRKUŞ
  3. Danışmanlar: PROF. DR. MURAT YAZICI
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilim ve Teknoloji, Mühendislik Bilimleri, Polimer Bilim ve Teknolojisi, Science and Technology, Engineering Sciences, Polymer Science and Technology
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Bursa Uludağ Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Otomotiv Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 80

Özet

Otomotiv endüstrisi ve havacılık sanayisinde ağırlık azaltma çalışmalarının hız kazanması ile üretimde hafif sandviç yapıların kullanımı artmaktadır. Bu gibi yapıların kullanılabilmesi için ağırlık azaltılırken mukavemet değerlerinin düşmemesi ve işlenebilirlik, geri dönüşüm, maliyet gibi parametrelerin de istenilen özelliklerde olması gerekmektedir. Sürekli elyaf takviyeli termoplastik malzemeler ise özgül mukavemet özelliklerinin yüksek olması ve geri dönüştürülebilir özellikleri sebebiyle hafif malzemeler arasında en çok tercih edilen polimer malzemelerdendir. Bu çalışmada sürekli elyaf takviyeli termoplastik kompozit malzeme kullanılarak sandviç üretimi yapılmıştır. Farklı çekirdek geometrilerine sahip kompozit sandviç yapıların üç nokta eğilme ve bası testleri yapılmıştır. Yapılan testler sonucunda sandviç yapıların mekanik özellikleri incelenmiştir. Sonlu elemanlar analiz yönteminde kullanılması amacıyla sandviç üretiminde kullanılan yapıştırıcı malzemenin mekanik özellikleri bulunmuştur. Son olarak sonlu elemanlar analiz yöntemi kullanılarak farklı çekirdek geometrisine sahip sandviç yapıların dayanım karşılaştırılması yapılarak uygulanan testler doğrulanmıştır.

Özet (Çeviri)

With the acceleration of weight reduction efforts in the automotive industry and aviation industry, the use of lightweight sandwich structures in production is increasing day by day. In order for such structures to be used, the strength values should not decrease while the weight is reduced, and the parameters such as workability, recycling and cost should be in the desired properties.Continuous fiber reinforced thermoplastic materials are among the most preferred polymer materials among lightweight materials due to their high specific strength properties and their recyclable properties. In this study, sandwich production was made using continuous fiber reinforced thermoplastic composite material. Three-point bending and compression tests of composite sandwich structures with different core geometries were performed. As a result of the tests, the mechanical properties of the sandwich structures were examined. In order to be used in the finite element analysis method, the mechanical properties of the adhesive material used in the sandwich production were found. Finally, the tests applied were verified by comparing the strength of sandwich structures with different core geometries using the finite element analysis method.

Benzer Tezler

  1. The investigation of advanced thermoplastic composite materials in aerospace applications

    Havacılık uygulamalarında ileri termoplastik kompozit malzemelerin geliştirilmesi

    ZELAL YAVUZ

    Doktora

    İngilizce

    İngilizce

    2023

    Polimer Bilim ve Teknolojisiİhsan Doğramacı Bilkent Üniversitesi

    Malzeme Bilimi ve Nanoteknoloji Ana Bilim Dalı

    PROF. DR. EMRAH ÖZENSOY

    DR. DÖNÜŞ TUNCEL

  2. Biyo-reçine esaslı tekstil kompozitlerinin performans özelliklerinin incelenmesi

    Investigation of performance characteristics of bio-resin based textile composites

    SEMİH ÖZKÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Tekstil ve Tekstil Mühendisliğiİstanbul Teknik Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ İPEK YALÇIN ENİŞ

  3. Sürekli karbon elyaf takviyeli termoplastik monokompozit flament esaslı ,kafes geometrili çekirdek yapıların kullanıldığı hafif sandviç paneller geliştirilmesi ve statik ve dinamik yükler altında performansının deneysel olarak belirlenmesi

    Development of novel sandwich structures by using continuous carbon fiber reinforced thermoplastic mono-composite lattice truss cores,and measurement of performance under static and dynamic loads experimentally

    GONCANUR AKBULUT

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Makine MühendisliğiUludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ BEHİYE KORKMAZ

    DOÇ. DR. MURAT YAZICI

  4. Pelet esaslı 3B kompozit yazıcı, karma elyaf tekniği ile parça üretimi ve performansının incelenmesi

    Pellet based 3D composite printer, fabrication of part by commingled fiber technique, and investigation of performances

    EMİR EMİNOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Otomotiv MühendisliğiBursa Uludağ Üniversitesi

    Otomotiv Ana Bilim Dalı

    PROF. DR. MURAT YAZICI

    DR. YÜCEL CAN

  5. Termoplastik prepreg esaslı ağır ticari araç koltuğu tasarımı, analizi ve üzerine enjeksiyon prosesi ile üretimi

    Thermoplastic prepreg based heavy commercial vehicle seat design, analysis and production by over-molding injection process

    SERKAN BİRÇİÇEK

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Polimer Bilim ve TeknolojisiKocaeli Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    DOÇ. DR. MUSTAFA ÖZGÜR BORA