3d printing porous polymer structuresfor tissue engineering
Başlık çevirisi mevcut değil.
- Tez No: 707731
- Danışmanlar: PROF. KENNY DALGARNO
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: FDM, Laser cutting, PLA, PCL, DMA, RCCA scaffold
- Yıl: 2017
- Dil: İngilizce
- Üniversite: University of Newcastle upon Tyne
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 67
Özet
Özet yok.
Özet (Çeviri)
Polymers are used in Tissue engineering area as synthetic scaffold and provides an opportunity for cell seeding through porous structure. Used porous polymers should be biocompatible and biodegradable for using in biomedical applications. The several manufacturing techniques were used to obtain controllable pore size and architecture. Throughout the help of additive manufacturing (AM), scaffold production has become widespread recently. In this study, the right common carotid artery which is the chosen scaffold type was tried to be manufactured by FDM (the type of AM) and Laser cutting methods using with PLA and PCL biodegradable polymers at a suitable porosity rate in biomedical applications. Also, to determine mechanical properties and thermal characterisations of manufactured scaffolds, static tensile and dynamic mechanical analysis (DMA) tensile tests were done respectively. As a result of evaluating the obtained information, the best method for PLA is the laser method, and the FDM method is used for PCL. Looking at the mechanical properties, PCL shows a better option for vascular scaffold application. The choice of the porosity rate, mechanical properties, and thermal characteristics gives the PCL FDM scaffold type as an optimum result.
Benzer Tezler
- Kontrollü salım yapan ilaç sistemlerinin 3 boyutlu yazıcılarla üretimi
Production of controlled releasing drug systems with 3D printing
ŞULE İLGAR
Yüksek Lisans
Türkçe
2023
BiyomühendislikYıldız Teknik ÜniversitesiBiyomühendislik Ana Bilim Dalı
DOÇ. DR. CEM BÜLENT ÜSTÜNDAĞ
DR. ÖĞR. ÜYESİ SONGÜL ULAĞ
- Kemik doku mühendisliğine yönelik sitrat içeren iskele yapıların 3b baskı ile üretilmesi ve etkinliğinin değerlendirilmesi
Producing with 3d printing and evaluation of efficiency of scaffold structures containing citrate for bone tissue engineering
MÜGE MUŞMULA
Yüksek Lisans
Türkçe
2022
Polimer Bilim ve TeknolojisiSüleyman Demirel ÜniversitesiRejeneratif Tıp Ana Bilim Dalı
PROF. DR. SERDAR SEZER
- Üç boyutlu yazıcılar için karbon nanotüp takviyeli nanokompozit filamentlerin üretilmesi
Production of carbon nanotube reinforced nanocomposite filaments for 3-D printers
SERHAT ORAN
Doktora
Türkçe
2022
Polimer Bilim ve TeknolojisiYalova ÜniversitesiPolimer Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET ATİLLA TAŞDELEN
- Preparation of biocompatible composite 3d architectures based on graphene oxide (GO) and chitosan for flexible all solid state supercapacitors
Esnek tüm katı hal süper kapasitörler için grafen oksit (GO) ve kitosan bazlı biyouyumlu kompozit 3d mimarilerin hazırlanması
SAEIDEH ALIPOORILEMEESLAM
Doktora
İngilizce
2024
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. MURAT BARSBAY
- Polimer/oktakalsiyum fosfat biyokompozitlerin 3-B katmanlı imalat yöntemi ile üretilmesi ve karakterizasyonu
Production and characterization of polymer / (octacalcium phosphate) biocomposites by 3D layer production method
SİNAN ŞAHİNKAYA
Yüksek Lisans
Türkçe
2020
Mühendislik BilimleriKütahya Dumlupınar ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA TUNCER