Eksenel yük uygulanan derin karıştırma kolonlarının farklı yöntemler ile elde edilen taşıma gücü değerlerinin kıyaslanması
Comparison of the bearing capacity values of axial loaded deep mixing columns by different methods
- Tez No: 709498
- Danışmanlar: DR. ÖĞR. ÜYESİ KAVEH DEHGHANIAN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: İstanbul Aydın Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: 137
Özet
Bu tez çalışmasında zemin iyileştirme yöntemlerinden biri olan derin zemin karıştırma yöntemi ile imal edilen kolonların taşıma gücünü belirlemek amacıyla, sahada yükleme testleri yapılmış veriler değerlendirilmiştir. Bu kapsamda beş farklı proje içindeki toplam 6 adet yapıya ait tam ölçekli yükleme testlerinden elde edilen yük-oturma değerleri, literatüre geçmiş taşıma gücü belirleme yöntemleri ile grafiksel olarak belirlenmiştir. Ardından derin temeller için hesaplanan taşıma gücü hesaplama yöntemleri ile her bir projeye ait kolon taşıma gücü değerleri hesaplanmıştır. Ayrıca projelere ait geoteknik değerlendirme raporlarında verilen taşıma gücü değerleri ile diğer sonuçlar birbiri ile karşılaştırılmış ve sonuçlar yorumlanmıştır. Yükleme deneylerinin sonuçlarının yorumlanmasında sıkça kullanılan üç yöntem kullanılmıştır. Yük artışı ile deformasyonlar arasındaki ilişkiden yola çıkılarak yapılan hesaplamalarda yöntemler arasında uyumlu sonuçlar ortaya çıkmıştır. Uşak Yurt Projesi'nin Yurt Binası ve Sosyal tesis projesi için Decourt ve Chin Kondner yöntemlerine göre hesaplanan kolon taşıma gücü değerleri birbirine yakın çıkmıştır. Bu tez çalışmasında analitik olarak hesaplanan ve Geoteknik raporda belirtilen taşıma gücü değerleri de birbirine yakın sonuçlar vermiştir. Bu nedenle Uşak yurt binası ve sosyal tesis projesi için decourt ve chin kondner yönteminin başarılı taşıma gücü değerleri ortaya koyması nedeni ile güvenli olduğu görülmektedir. Ancak Debeer yöntemi ile Uşak Yurt projesi için hesaplanan kolon taşıma gücü değeri diğer değerlere oranla düşük çıkmıştır. Gazi Anadolu Lisesi Eğitim Yerleşkesi Projesi, Elazığ Konut Projesi, Amasya Konut ve Hastane Projeleri için sahada oluşturulan Derin Karıştırma Kolonları (DKK) için yapılan eksenel basınç deneyleri ile grafiksel yöntemlerle elde edilen değerler analitik yöntemlerle hesaplanan değerler ile kıyaslandığında Decourt ve Chin Kondner yöntemlerine göre hesaplanan kolon taşıma gücü değerleri birbirine yakın değerler olarak ortaya çıktığı anlaşılmıştır. Ancak Debeer yöntemi ile hesaplanan kolon taşıma gücü değeri diğer dört projede olduğu gibi diğerlerinden düşük çıkmıştır.
Özet (Çeviri)
In this thesis study, in order to determine the bearing capacity of the columns manufactured with the deep soil mixing method, which is one of the soil improvement methods, field loading tests were carried out and the data were evaluated. In this context, the load-settlement values obtained from the full-scale loading tests of a total of 6 structures in five different projects were determined graphically using the bearing capacity determination methods in the literature. Then, the bearing capacity calculation methods calculated for deep foundations and the column bearing capacity values of each project were calculated. In addition, the bearing capacity values given in the geotechnical evaluation reports of the projects and other results were compared with each other and the results were interpreted. Three commonly used methods were used to interpret the results of loading experiments. In the calculations based on the relationship between the load increase and the deformations, consistent results have emerged between the methods. Column bearing capacity values calculated according to Decourt and Chin Kondner methods for the Dormitory Building and Social Facility project of the Uşak Dormitory Project are close to each other. In this thesis study, analytically calculated bearing capacity values specified in the Geotechnical report also gave results close to each other. For this reason, it is seen that the decourt and Chin Kondner methods for the Uşak dormitory building and social facility project are safe because they reveal successful carrying capacity values. However, the column bearing capacity value calculated for the Uşak Yurt project with the Debeer method was lower than the other values. The comparison between the values obtained by axial pressure tests made from Deep Mixing Columns (DMC) created in the field for Gazi Anatolian High School Education Campus Project, Elazığ Housing Project, Amasya Housing and Hospital Projects and the values obtained by graphical methods with the values calculated by analytical methods, reveals that the column bearing capacity values calculated according to the Decourt and Chin Kondner methods are close to each other. However, the column bearing capacity value calculated by the Debeer method was lower than the others, as in the other four projects were.
Benzer Tezler
- Aletsel statik eksenel yükleme deneyi ile zemin davranışlarının incelenmesi ve kazık taşıma gücü tayini
Analysis of soil behavior and determination of pile bearing capacity with instrumental static axial loading test
AHMET OLUKLUPINAR
Yüksek Lisans
Türkçe
2020
İnşaat MühendisliğiManisa Celal Bayar Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. YUSUF ERZİN
- Eksenel yüklenmiş kazıklı radye temellerin model testlerle irdelenmesi
Investigation of axial loaded piled raft foundations by model tests
ERCAN EGEMEN BAŞAR
Doktora
Türkçe
2023
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. İLYAS DEVRAN ÇELİK
DR. ÖĞR. ÜYESİ SONER UZUNDURUKAN
- Basınç tipi zemin ankraj davranışının sayısal analizler ve saha deneyleri ile incelenmesi
Investigation of compression ground anchor behaviour through numerical analyses and field tests
GÖKALP DEMİRCİ
Yüksek Lisans
Türkçe
2024
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. RECEP İYİSAN
- One dimensional case studies with picfoam solver
Picfoam çözücüsü ile tek boyutta incelenen çalışmalar
FATMA TUGÇE YILMAZ
Yüksek Lisans
İngilizce
2024
Havacılık ve Uzay Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. FIRAT OĞUZ EDİS
- A novel antenna configuration for microwave hyperthermia
Mikrodalga hipertermi için yeni bir anten yapılanması
GÜLŞAH YILDIZ ALTINTAŞ
Doktora
İngilizce
2022
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. İBRAHİM AKDUMAN
DOÇ. DR. TUBA YILMAZ ABDOLSAHEB