Geri Dön

Comparison of models for the estimation of corrosion rate ofcarbon steel in fresh water

Başlık çevirisi mevcut değil.

  1. Tez No: 714664
  2. Yazar: GÖZDE DURMAZ
  3. Danışmanlar: Belirtilmemiş.
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Corrosion Rate of Carbon Steel, Fresh Water Corrosion, Langelier Scaling Index
  7. Yıl: 2018
  8. Dil: İngilizce
  9. Üniversite: Politecnico di Milano
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 55

Özet

Özet yok.

Özet (Çeviri)

Corrosion is very important parameters for industry on the process and production quality and economical point of view. This research is focused on fresh water corrosion on carbon steel and affecting parameter of corrosion rate. To evaluate the closest match with real value of corrosion rate is compared with some models which is found from literature search. For this purpose, first model is Engineering Tools for Corrosion written by Luciano Lazzari, second model is Uhlig's Corrosion Handbook, third model is research done by R. E. Melchers and B. B. Chernov, about Corrosion of mild steel in elevated temperature hard freshwater, fourth model is which is excepted as a real value from correlation between corrosion indices and corrosiveness of groundwater a study with reference to selected areas, corrosion rates were calculated by gravimetric method and results have taken. pH, alkalinity (ppm), temperature (oC), hardness (oF), resistivity, oxygen, calcium and chloride amount (ppm), total dissolved solids (TDS) (ppm) were taken with same value and then pHs, scaling index, corrosion rates with respect to models' equations are calculated and compared. After all calculations; depend on these results decide which model is give close result to real value.

Benzer Tezler

  1. Evaluation of EMEP SO2 emissions for Turkey using WRF-CMAQ modeling system

    Emep SO2 emisyonlarının WRF-CMAQ model sistemi kullanılarak Türkiye için değerlendirilmesi

    AMIRHOSSEIN ABDI

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Çevre Mühendisliğiİstanbul Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. BURÇAK KAYNAK TEZEL

  2. Structural assessment and fatigue evaluation of a 60-year-old linkspan bridge in Northeast of England

    Kuzeydogu Ingıltere'de 60 yıllık lınkspan koprusunun yapısal degerlendırmesı ve yorulma analızı

    EMRE USTA

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. KADİR ÖZAKGÜL

  3. Design of a stainless steel composite bridge according to the eurocodes and cost analysis

    Paslanmaz çelik ile kompozit bir köprünün eurocode'a göre tasarımı ve maliyet analizi

    TİJEN BAYER

    Yüksek Lisans

    İngilizce

    İngilizce

    2014

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. BARLAS ÖZDEN ÇAĞLAYAN

  4. Çok düşük dayanımlı beton silindirlerin geri kazandırılmış pet lifli polimer ile güçlendirilmesi

    Very low strength concrete cylinders strengthening with recycled pet fiber polymer

    NESLİHAN ASLAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MEDİNE İSPİR ARSLAN

  5. Zemin çivileri tasarım prensipleri ve davranışın sonlu elemanlar yöntemiyle analizi

    Başlık çevirisi yok

    ALPER ARSLAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    Geoteknik Bilim Dalı

    DOÇ. DR. M. TUĞRUL ÖZKAN