Geri Dön

Talk dolgu maddesinin otomotiv sızdırmazlık profili üretiminde kullanılan polipropilen üzerine etkilerinin sonlu elemanlar analizi ile incelenmesi

Investigation of the effects of talk filler on polypropylene used in automotive sealing profile production by finite element analaysis

  1. Tez No: 716626
  2. Yazar: MUHAMMET EMİN KARAKAŞ
  3. Danışmanlar: DOÇ. DR. HÜSEYİN ATA KARAVANA
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Mühendislik Bilimleri, Polimer Bilim ve Teknolojisi, Chemistry, Engineering Sciences, Polymer Science and Technology
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Malzeme Bilimi ve Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Malzeme Bilimi ve Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: 72

Özet

Otomotiv sızdırmazlık profillerinde statik bölgelerde kullanılan polipropilen (PP) malzemelerin içeriğinde farklı oranlarda kullanılan talk dolgu maddesinin termal ve akış özellikleri üzerindeki etkilerinin incelenmesi ve bu inceleme sonucunda ortaya çıkabilecek olan avantaj ve dezavantajların belirlenmesi amaçlanmıştır. Bu çalışmada, otomotiv sızdırmazlık profillerinde ürün tasarımı, kalıp tasarımı ve imalat metotlarının geliştirmesi adına kullanılabilecek bir veri tabanı oluşturulması da hedeflenmiştir. PP polimeri içerisine belirli oranlarda eklenen talk malzemenin PP'nin termal özelliklerine, akış özelliklerine ve maliyetine etkisi incelendiği bu çalışmada içerisinde %20, %25 ve %30 talk içeren PP malzemeler kullanılmıştır. Böylece, profilin kullanılacağı bölgeye özel seçimler yapılabilecektir. Üç farklı talk oranına sahip PP malzemelerin akışkanlık değerlendirmeleri için kapilar reometre testi, yoğunluk testi, termal iletkenlik testi, özgül ısı testi yapılmıştır. Farklı talk oranlarına sahip PP malzemelerden elde edilen veriler kullanılarak SolidWORKS bilgisayar destekli 3 boyutlu katı modelleme ve tasarım yazılımı ile akış performansları karşılaştırılmıştır. Analiz sonuçlarına göre talk oranı arttıkça kalıp çıkışında okunan basınç ve sıcaklık değerleri ile eriyik basıncı değerinin düştüğü görülmüştür. Talk oranı artışına bağlı olarak yoğunluğun artması neticesinde termal iletkenliğin de artacağı anlaşılmıştır.

Özet (Çeviri)

It is aimed to examine the effects of talc filler, which is used at different rates in the content of polypropylene (PP) materials used in static regions in automotive sealing profiles, on the thermal and flow properties and to determine the advantages and disadvantages that may arise as a result of this examination. In this study, it is also aimed to create a database that can be used for the development of product design, mold design and manufacturing methods in automotive sealing profiles. The effect of the talc material added into the PP polymer at certain rates on the thermal properties, flow properties and cost of PP was investigated. PP materials containing 20%, 25% and 30% talc were used in the study. Thus, specific selections can be made for the region where the profile will be used. Capillary rheometer test, density test, thermal conductivity test and specific heat test were performed for the fluidity evaluation of PP materials with three different talc ratios. Flow performances were compared with SolidWORKS computer aided 3D solid modeling and design software using data obtained from PP materials with different talc ratios. According to the results of the analysis, it was observed that the pressure and temperature values read at the mold exit and the melt pressure value decreased as the talc ratio increased. It has been understood that the thermal conductivity will increase as a result of the increase in the density depending on the increase in the talc ratio.

Benzer Tezler

  1. Production and characterization of thermoplastic elastomer foams based on styrene-ethylene-butadiene-styrene and polypropylene

    Stiren-etilen-bütadien-stiren ve polipropilen bazlı köpük termoplastik elastomerlerin geliştirilmesi ve karakterizasyonu

    CEREN KIROĞLU

    Doktora

    İngilizce

    İngilizce

    2022

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. NİLGÜN KIZILCAN

  2. Talk mineral dolgu maddesi ile polipropilen blok kopolimer boruların kısa süreli iç basınç performans özelliklerinin optimizasyonu

    Optimisation of short time internal pressure performance properties of mineral filled polypropylene pipes

    ERKUT FINDIK

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Makine MühendisliğiKocaeli Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ŞENOL ŞAHİN

  3. Kalsiyum karbonat dolgu malzemesinin kaynaklı ve kaynaksız pe100 polietilen boruların mekanik ve fiziksel özelliklerine etkisinin incelenmesi

    Optimization of short and long term performance effects of mineral fillers on polyolefin pipe grade materials

    İLBEYİ KILAVUZ

    Doktora

    Türkçe

    Türkçe

    2013

    Makine MühendisliğiKocaeli Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. PAŞA YAYLA

  4. Polimer esaslı malzemelerde dolgu maddelerinin sıcak plaka kaynağı mukavemetine etkisi

    Fillers effect on the strength of the hot plate welding in polymer based materials

    EMRE TAŞKIRAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    Makine MühendisliğiDokuz Eylül Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ÇİÇEK ÖZES

    DOÇ. DR. SAMİ SAYER

  5. Cam küre, CaCO3 ve talk dolgulu polipropilen hibrit konpozitlerin mekanik ve fiziksel özelliklerinin incelenmesi

    Analysing the mechanical and physical properties of glass bead, CaCO3 and talc filled polypropylene hybrid composites

    YASİN KANSU

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    KimyaMarmara Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. NİLHAN KAYAMAN APOHAN