Computational exploration of thermodynamicproperties of porous and layered materials
Başlık çevirisi mevcut değil.
- Tez No: 716884
- Danışmanlar: DR. DAVİD S. SHOLL
- Tez Türü: Doktora
- Konular: Biyokimya, Biyomühendislik, Biochemistry, Bioengineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Georgia Institute of Technology
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 161
Özet
Özet yok.
Özet (Çeviri)
Noble gases are relatively rare gases, however, they have been used in many areas. Currently, separation of noble gases are achieved by fractional distillation at cryogenic temperatures and materials that can separate them around room temperature are investigated. One of the promising class of materials is metal-organic frameworks due to their high surface area, pore volume and tunability. In this thesis, ab-initio based force fields were developed for Ar and Xe adsorption in six different MOFs to predict adsorption properties and compare this non-empirical approach to the experimental results and generic force field (FF) simulations. Using three DFT functionals (PBE-D2, vdW-DF, and vdWDF2) in periodic models of M-MOF-74 (M= Co, Ni, Zn, Mg), ZIF-8 and Cu-BTC, first principles based FFs are derived. Selective separation of contaminants from ambient air is another crucial field since some of those contaminants can be detrimental to health. In this thesis, a water-stable MOF, UiO-66, is computationally functionalized with more than 30 functional groups using cluster and periodic systems and binding energies of NH3, H2S, CO2 and H2O are calculated to rank the functionalized UiO-66 materials for selective separation of contaminants in humid air conditions. Finally, the phase stability and transitions of 2-D layered ferroelectric materials, CuInP2Q6 (Q=S, Se), are investigated. The phase transition of CuInP2Se6 is studied using DFT calculations and phonon theory to identify instabilities at zone center and boundaries of the structure while possible spinodal decomposition regions of CuxInyP2S6 are determined with respect to Cu concentration by combining DFT calculations with thermodynamic relations.
Benzer Tezler
- Thermodynamic stability of binary compounds: A comprehensive computational and machine learning approach
İkili bileşiklerin termodinamik kararlılığı: Kapsamlı bir hesaplamalı yaklaşım ve makine öğrenmesi uygulaması
FERAYE HATİCE CANBAZ
Yüksek Lisans
İngilizce
2024
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiHesaplamalı Bilimler ve Mühendislik Ana Bilim Dalı
PROF. DR. ADEM TEKİN
- An exploration of numerical approaches to boltzmann equation regarding hydrodynamics
Boltzmann denklemine sayısal yaklaşımların hidrodinamik açıdan bir incelemesi
ALPER ŞAHİN
Yüksek Lisans
İngilizce
2019
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiMühendislik Bilimleri Ana Bilim Dalı
PROF. DR. IŞIK HAKAN TARMAN
- 3D printed concrete: Multiscale mechanical characterization and computational modeling
3B baskılı beton: Çok ölçekli mekanik karakterizasyon ve hesaplamalı modelleme
ALPER TUNGA BAYRAK
Yüksek Lisans
İngilizce
2024
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. AFŞİN SARITAŞ
DOÇ. DR. ÇAĞLA AKGÜL
- Computational investigation of allostery in nanobody – antigen complexes
Nanokor – antijen komplekslerindeki alosterinin hesaplamalı incelenmesi
NURŞAH HALİSDEMİR
Yüksek Lisans
İngilizce
2024
Biyoteknolojiİzmir Yüksek Teknoloji EnstitüsüBiyoteknoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ARZU UYAR
DR. ÖĞR. ÜYESİ HÜMEYRA TAŞKENT SEZGİN
- Computational investigation of battery materials using density functional theory
Yoğunluk fonksiyonel teorisi kullanılarak pil malzemelerinin hesaplamalı incelenmesi
DOAA AASEF AHMED AHMED
Doktora
İngilizce
2023
EnerjiSakarya ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. TUĞRUL ÇETİNKAYA