İndirekt reçine kompozit materyalleri ile farklı tip yapıştırma sistemleri arasındaki bağlantı kuvvetinin in-vitro olarak incelenmesi
In-vitro i̇nvestigation of the bond strength between different i̇ndirect resin composite materials and different types of bonding systems
- Tez No: 720424
- Danışmanlar: DOÇ. DR. OKTAY YAZICIOĞLU
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Restoratif Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 210
Özet
Bu çalışmada farklı indirekt reçine kompozit materyallerinin diş ve direkt kompozit materyalleri üzerine farklı tip yapıştırma sistemleri kullanılarak makaslama kuvvet direnci testi uygulanıp elde edilen kopma dayanım kuvvetinin in vitro olarak incelenmesi amaçlanmıştır. Çalışmada 64 adet boş otopolimerizan akrilik örnek hazırlanmıştır. Bu örneklerin içleri için 32 adet çürüksüz ve restorasyonsuz sağlam insan molar dişi ve 32 adet disk şeklinde Z250 (3M ESPE, St. Paul, MN, ABD) kompozit örnek kullanılmıştır. Bu materyaller üzerine üretici firmaların önerileri doğrultusunda RelyX U200(3M ESPE GmbH Dental Products, Neuss, Germany) self adeziv reçine siman ve RelyX Ultimate(3M ESPE GmbH Dental Products, Neuss, Germany) total etch adeziv reçine siman uygulanarak iki alt grup oluşturulmuştur. RelyX Ultimate uygulanan gruba Scotchbond Universal Etch(3M ESPE GmbH Dental Products, Neuss, Germany) ile Single Bond Universal(3M ESPE GmbH Dental Products, Neuss, Germany) uygulanmıştır. Gradia (GC Corporation Tokyo, Japan), Ceramage Body(ShofuInc, Kyoto, Japan), Tescera ATL(Bisco Dental Products Richmond, ABD) ve Lava Ultimate(3M ESPE, Seefeld, Germany) materyallerinden üretilen çubuklar simante edilerek deney grupları oluşturulmuştur(n=12). Makaslama kuvvet direnci 230 deney yapılarak ölçülmüştür. Kırık yüzeyler stereo mikroskopta incelenmiş kopma türleri belirlenmiştir. Örnek yüzeyleri SEM taramalı elektron mikroskop ile incelenmiştir. Çalışmada elde edilen bulgular değerlendirilirken, istatistiksel analizler için SPSS IBM 24,0 Software programı kullanılmış,. veriler Shapiro Wilk's testi, Mann-Whitney U testi ve Ki-Kare testi ile p
Özet (Çeviri)
In this study, it was aimed to apply different indirect resin composite materials on teeth and direct composite materials using different types of bonding systems and to compare the results obtained by applying the shear strength test in vitro. In the study, 64 empty autopolymerizing acrylic samples were prepared. 32 pieces non-carious and non-restorative intact human molar teeth and 32 pieces disc shaped Z250 (3M ESPE, St. Paul, MN, USA) composite samples. Two subgroups were formed by applying RelyX U200 (3M ESPE GmbH Dental Products, Neuss, Germany) self adhesive resin cement and RelyX Ultimate (3M ESPE GmbH Dental Products, Neuss, Germany) total etch adhesive resin cement on these materials with the recommendations of the manufacturers. Scotchbond Universal Etch (3M ESPE GmbH Dental Products, Neuss, Germany) and Single Bond Universal (3M ESPE GmbH Dental Products, Neuss, Germany) were applied to RelyX Ultimate applied group. Cylindrical rod shaped samples obtained form Gradia (GC Corporation Tokyo, Japan), Ceramage Body (ShofuInc, Kyoto) , Japan), Tescera ATL (Bisco Dental Products Richmond, USA) and Lava Ultimate(3M ESPE, Seefeld, Germany) were cemented and experimental groups were formed (n=12). Shear force resistance was measured by performing 230 experiments. Fractured surfaces were examined by stereomicroscope and fracture types were determined. Sample surfaces were examined by SEM scanning electron microscope. While evaluating the findings obtained in the study, SPSS IBM 24.0 Software program was used for statistical analysis. The data were evaluated with Shapiro Wilk's test, Mann-Whitney U test and Chi-Square test with a significance level of p
Benzer Tezler
- Üç farklı indirekt restorasyon materyaline uygulanan yüzey hazırlığı ve simantasyon tekniklerinin mikrogerilim bağlanma değerlerine etkisi
The effect of surface treatments and adhesive cements on microtensile bonding of three different restoration material
DENİZ TUNCER
Doktora
Türkçe
2016
Diş Hekimliğiİstanbul ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF. DR. TANER YÜCEL
- Aproksimal şekillendirme ve yükseltilmesi yapılmış dişlere yapılan farklı indirekt kompozit uygulamalarının kırılma dayanımının in vitro olarak incelenmesi
Effect of deep margin elevation on fracture resistance of different indirect resin based composite materials
EMİNE KITIN
Diş Hekimliği Uzmanlık
Türkçe
2024
Diş Hekimliğiİstanbul ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. OKTAY YAZICIOĞLU
- Farklı self adeziv reçine simanların sitotoksik etkileri
Cytotoxic effects of different self adhesive resin cements
SONER ŞİŞMANOĞLU
Doktora
Türkçe
2018
Diş Hekimliğiİstanbul ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
PROF. DR. MUSTAFA DEMİRCİ
- Farklı yöntemlerle ve materyallerle yapılan lamina vener restorasyonların klinik başarısının değerlendirilmesi
Evaluation of clinical success of laminate veneer fabricated with different materials and methods
NURHAN ALTAY
Diş Hekimliği Uzmanlık
Türkçe
2015
Diş Hekimliğiİstanbul ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF. DR. CAN DÖRTER
- Farklı miktarlarda doku kaybına uğrayan endodontik tedavi görmüş dişlerde çeşitli restorasyon tekniklerinin kırılma direncine etkisi
Evaluation of the influence of different restoration techniques on the fracture resistance of endodontically treated teeth with various amounts of tissue loss
ELİF TÜRKEŞ
Doktora
Türkçe
2017
Diş Hekimliğiİstanbul ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
PROF. DR. YASEMİN BENDERLİ GÖKÇE