Geri Dön

A composite made three-axis mass vibrationabsorber for rotorcraft

Başlık çevirisi mevcut değil.

  1. Tez No: 723764
  2. Yazar: TAHİR SOYDAN
  3. Danışmanlar: PROF. GİUSEPPE QUARANTA
  4. Tez Türü: Yüksek Lisans
  5. Konular: Endüstri ve Endüstri Mühendisliği, Havacılık ve Uzay Mühendisliği, Industrial and Industrial Engineering, Aeronautical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: İngilizce
  9. Üniversite: Politecnico di Milano
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 97

Özet

Özet yok.

Özet (Çeviri)

There are a lot vibrating objects/systems all around us and some of them are vibrating on purpose while some of them are side effects of their working principle. Moreover, some of them are not perceivable such as a bee antenna while some of them are large and disturbing like helicopter blades. Even tough, the helicopters are not only used for military but also for the civilian transformation due to its unique properties, vibratory loads make it uncomfortable. And the purpose of this thesis is to reduce level of helicopter vibrations generated by its blades by designing a mass-tuned vibration absorber which is placed onto helicopter hub. Moreover, composite materials are the innovative solutions for the aircraft/aerospace structures because of their high strength over weight ratio, corrosion resistance etc. Hence, the main components of the aircrafts are being replaced day by day. Hence, in this thesis composite materials are used for the springs' design that are the main components of the vibration absorber. Carbon fiber fabric and tape are used together to create the best lamination sequence that supports the loads while springs' out of plane mode is tuned at the frequency that has the biggest effect on the vibratory loads' envelope of the helicopter. That dominant frequency for a helicopter is N/rev most of the case where N is the number of the blades. So, the vibratory loads are reduced acting on that frequency. Nastran is the software used for all kind of analyses accomplished like linear static, nonlinear static, nonlinear transient. Moreover, MATLAB is used for all kind of optimization work and results' plot.

Benzer Tezler

  1. Alümina fiber takviyeli Al-si metal matriksli kompozitlerin üretimi ve mikroyapı-özellik ilişkilerinin incelenmesi

    production of alumina fiber reinforced Al-si metal matrix composites and the investigation of their microstructure-propetry relation ships

    HATEM AKBULUT

    Doktora

    Türkçe

    Türkçe

    1994

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. FEVZİ YILMAZ

  2. Küçük titreşim ölçümleri ve dolgu duvarlarının mekanik modele yansıtılması

    Başlık çevirisi yok

    UMUT DEVRİM ERSİN

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. H. FARUK KARADOĞAN

  3. Sanatçıların yarattığı pencereler ve kapılar

    Başlık çevirisi yok

    ALİ BİRO

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. SEMRA ÖGEL

  4. Darbe hasarına maruz kalan sandviç kompozitlerin statik mukavemetinin incelenmesi

    Investigation of static strength of sandwich composites subjected to impact damage

    ABDULLAH İKİZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Havacılık Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. ZAHİT MECİTOĞLU

  5. Otobüs açılır tavan mekanizması konstrüksiyonu

    Bus opening roof mechanism construction

    ÖMER YILDIRIM

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. CEMAL BAYKARA