Doğal elyaf takviyeli polipropilen malzemenin kimyasal köpürtme ajanı takviyesi ile elde edilen kompozitin mekanik, termal ve morfolojik özelliklerinin incelenmesi
Investigation of the mechanical, thermal and morphological properties of the composite made of natural fiber reinforced polypropylene material with chemical foaming agent
- Tez No: 724039
- Danışmanlar: PROF. DR. MÜNİR TAŞDEMİR
- Tez Türü: Yüksek Lisans
- Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Metalurji ve Malzeme Mühendisliği Bilim Dalı
- Sayfa Sayısı: 71
Özet
Bu çalışmada doğal elyaf takviyeli polipropilen (PP) malzemenin içerisine %1-2-3 oranlarında kimyasal köpürtme ajanı takviyesi yapılmıştır. Enjeksiyon makinesinde uygun kalıplarda enjeksiyon yöntemiyle kalıplanarak standart deney numuneleri elde edilmiştir. Elde edilen bu deney numunelerine çekme, darbe, sertlik, MFI, HDT-Vicat, aşınma, sürtünme, su emme, yoğunluk gibi mekanik, tribolojik ve ısısal testler uygulanmıştır. Bu deneylerin yanı sıra baloncukların yapıdaki dağılımlarının incelenmesi maksadıyla SEM incelemeleri yapılmıştır. Yapılmış olan tüm bu deney neticelerinin incelenmesiyle doğal elyaf takviyeli polipropilen (PP)'e katılan baloncukların, elde edilen doğal elyaf takviyeli plastik kompozitinin mekanik, tribolojik, ısısal ve mikroyapısal özelliklerini önemli ölçüde değiştirdiği tespit edilmiştir. Çalışmamızın ilk bölümünde malzemeler, doğal elyaf takviyeli plastik kompozitler hakkında genel bilgiler verilmiş olup çalışma konumuzla ilgili yapılan çalışmalar ve sonuçları sunulmuştur. İkinci bölümde araştırmada kullanılan malzemeler ve numunelerin elde edilmesi anlatılmıştır. Bu bölümde numuneler üzerinde uygulanan testler hakkında da bilgi verilmiştir. Üçüncü bölümde ise yapılan deneyler sonrası elde edilen sonuçlar ve bu sonuçlara ait grafikler sunulmuştur. Son bölümde ise deney sonuçlarının yorumlanmasına yer verilmiştir.
Özet (Çeviri)
The automotive industry is among the priority technology areas of our country, and the reduction of vehicle weight and fuel consumption and thus CO2 emissions without compromising safety criteria are among the priority research areas. For this reason, R&D studies on increasing the use of polymer-based materials in the automotive industry are of great importance. In order to produce“high strength and weight reduction parts”in plastic molding technologies, advanced technologies that focus on cost reduction and efficiency are being implemented rapidly. The chemical foaming process, which provides many advantages such as reducing the consumption of plastic material used, reducing the total molding cycle time, using less tonnage injection molding machines, and thus reducing the energy costs, is one of the innovative technologies that have been implemented since a very recent time. In this study, chemical foaming agent were be reinforced at the rate of 1-2-3% in natural fiber-reinforced recycled composite polypropylene raw material. The samples obtained in the injection machine was be molded in the sizes and shapes in accordance with the standards. Tensile, hardness, impact and three points bending tests would be done. Not only mechanical proporties, but also physical proporties is investigated. Such as; Water absorption test, melt flow index test (MFI), density, Vicat softening temperature, heat deflection temperature (HDT), water absorption, %water absorption, abrasive test would done. By examining the test results, the mechanical, and morphological properties of natural fiber reinforced polypropylene materials at different chemical agent percentages were examined. With increasing the amount of foaming agent, mechanical properties decreased. Optimum yield can be obtained from the results by investigating property changes. The morphology of the microcellular hemp fibre composites were examined using scanning electron microscopy (SEM) to observed cell morphology cell size, shape, and distribution of cells account for physical properties behavior.
Benzer Tezler
- Development of natural fiber reinforced composites with flame retardant fillers
Alev geciktirici katkılar ile doğal lif takviyeli kompozitler geliştirilmesi
MOHAMMAD SHOHAG ALAM
Yüksek Lisans
İngilizce
2023
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ DEMİR
- Termoplastik kompozit kirişlerin titreşim sönümleme davranışları
Vibration damping behavior of the thermoplastic composite beams
BURAK MATYAR
Yüksek Lisans
Türkçe
2022
Otomotiv MühendisliğiBursa Uludağ ÜniversitesiOtomotiv Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT YAZICI
- Doğal elyaf takviyeli termoplastik kompozitlerin mekanik özelliklerinin araştırılması
Investing of mechanical properties of natural fiber reinforced thermoplastic composites
SAMET SANBUR
Yüksek Lisans
Türkçe
2020
Makine MühendisliğiDokuz Eylül ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ÇİÇEK ÖZES
- Environmentally-friendly, high strength lignin filled polypropylene composites
Çevreye duyarlı, yüksek mukavemetli polipropilen lignin kompozitleri
TUĞÇE UYSALMAN
Yüksek Lisans
İngilizce
2015
Mühendislik Bilimleriİzmir Katip Çelebi ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET ÖZGÜR SEYDİBEYOĞLU
- Effect of natural fiber wastes on polyolefin and thermoplastic based materials
Doğal elyaf atıkların poliolefin ve termoplastik malzemeler üzerindeki etkisi
FADIL ANZER YAŞAR
Yüksek Lisans
İngilizce
2019
Makine Mühendisliğiİzmir Katip Çelebi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ÇINAR EMİNE YENİ