Çocuk diş hekimliğinde farklı polisaj prosedürleri ile kullanılan restoratif materyallerin yüzey pürüzlülüğü ve renk değişimlerinin değerlendirilmesi
Evaluation of surface roughness and color changes of restorative materials used with different polishing procedures in pediatric dentistry
- Tez No: 730874
- Danışmanlar: PROF. DR. BEHİYE BOLGÜL
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Hatay Mustafa Kemal Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Çocuk Diş Hekimliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 107
Özet
Giriş ve Amaç: Çalışmamızda çocuk diş hekimliği kliniklerinde kullanılan 4 farklı restoratif materyalin (Equia Forte, G-aenial Universal Injectable, Fill-up, Estelite Universal Flow Super Low) 4 farklı polisaj prosedürü (Sof-Lex, OptiDisc, Identoflex Composite Polisher, Super-Snap) uygulaması sonucu yüzey pürüzlülüğü ve renk stabilitesi özelliklerinin değerlendirilmesi amaçlanmıştır. Gereç ve Yöntem: Her bir restoratif materyalden 32 adet olacak şekilde toplamda 128 adet örnek 4 farklı polisaj prosedürü ile cilalanmak üzere üretici firmaların talimatları doğrultusunda her bir materyal 6 mm çapında, 2 mm yüksekliğinde polietilen kalıplar içerisine yerleştirilerek hazırlanmıştır. (n=8) Bitim ve cila işlemlerinin ardından örnekler 24 saat 37°C distile suda bekletilmiştir. Ardından örneklerin yüzey pürüzlülüğü ve renk stabilitesi ölçümleri yapılmıştır. Yüzey pürüzlülüğü testi ölçümleri için Mustafa Kemal Üniversitesi Teknoloji ve Ar-Ge Uygulama ve Araştırma Merkezinde bulunan Hysitron TI 950 TriboIndenter cihazı kullanılmıştır. Renk stabilitesini belirlemek için bir spektrofotometre cihazı (VITA Easyshade® Advance 4.0 (VITA Zahnfabrik, Bad Sackingen, Germany) kullanılmıştır. Daha sonra örnekler kola çözeltisi içerisinde 1 hafta boyunca bekletilmiş ve sonrasında final renk ölçümleri yapılmıştır. Renk farkları CIEDE 2000 sistemine göre kaydedilmiştir. Bulgular: En düşük yüzey pürüzlülük değerleri G-aenial materyalinde, en yüksek yüzey pürüzlülük değerleri ise Equia materyalinde görülmüştür.(p
Özet (Çeviri)
Introduction and Aim: In our study, 4 different polishing procedures (Sof-Lex, OptiDisc, Identoflex Composite Polisher, Super-Snap) application of 4 different restorative materials (Equia Forte, G-aenial Universal Injectable, Fill-up, Estelite Universal Flow Super Low) used in pediatric dentistry clinics as a result, it was aimed to evaluate the surface roughness and color stability properties. Materials and Methods: A total of 128 samples, 32 from each restorative material, were prepared by placing each material in 6 mm diameter, 2 mm high polyethylene molds to be polished with 4 different polishing procedures in accordance with the manufacturer's instructions.( n=8) Samples after finishing and polishing processes. It was kept in distilled water at 37°C for 24 hours. Then, surface roughness and color stability measurements of the samples were made. Hysitron TI 950 TriboIndenter device in Mustafa Kemal University Technology and R&D Application and Research Center was used for surface roughness test measurements. A spectrophotometer device (VITA Easyshade® Advance 4.0 (VITA Zahnfabrik, Bad Sackingen, Germany) was used to determine the color stability. Then the samples were kept in the coke solution for 1 week and then the final color measurements were made. Color differences were recorded according to the CIEDE 2000 system. Results: The lowest surface roughness values were observed in the G-aenial material, and the highest surface roughness values were observed in the Equia material. (p
Benzer Tezler
- Halojen ve led ışık kaynakları ile polimerize edilerek, farklı bitirme / polisaj teknikleri uygulanan iki farklı restoratif materyalin; yüzey sertliği, yüzey pürüzlülüğü ve biaksiyal fleksural dayanımlarının in vitro incelenmesi
Polymerized with halogen and led light sources,two different restorative materials applied for different finishing / polishing techniques; in vitro investigation of surface hardness, surface roughness and biaxial flexural strength
RÜYA ALPAR
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş HekimliğiSüleyman Demirel ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
PROF. DR. ÇİĞDEM KÜÇÜKEŞMEN
- Farklı polisaj işlemlerinin mine ve kompozit rezin restorasyonların renk stabilitesi ve yüzey özellikleri üzerindeki etkisinin değerlendirilmesi
Evaluation of the effects of different polishing processes on color stability and surface properties of enamel and composite resi̇ne restorati̇ons
EBUBEKİR YILMAZ
Diş Hekimliği Uzmanlık
Türkçe
2020
Diş HekimliğiErciyes ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. SEZER DEMİRBUĞA
- Çocuk diş hekimliğinde farklı sedasyon tekniklerinin etkinliğinin değerlendirilmesi
The evaluation of the efficiency of different sedation techniques in pediatric dentistry
BUĞRA ÖZEN
Doktora
Türkçe
2005
Diş HekimliğiAnkara ÜniversitesiPedodonti Ana Bilim Dalı
PROF.DR. NECMETTİN ÜNAL
PROF.DR. SERAP ÇETİNER
- Diş hekimliğinde farklı cam iyonomer restoratif materyallerin antimikrobiyal etkilerinin, nanosertliklerinin ve sitotoksisitelerinin in vitro olarak incelenmesi
In vitro examination of antimicrobial effects, nanohardness and cytotoxicity of different glass ionomer restorative materials in dentistry
ALEM COŞGUN
Diş Hekimliği Uzmanlık
Türkçe
2018
Diş HekimliğiMustafa Kemal ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
PROF. DR. BEHİYE BOLGÜL
- Çocuk diş hekimliğinde kullanılan farklı restoratif materyallerin rat sub-kutan dokuda meydana getirdiği histopatolojik reaksiyonların karşılaştırılması
Comparison of histopathological reaction of rat SUB-cutaneous tissue to different restorative materials in pediatric dentistry
ÖZLEM KUZU AYDIN
Doktora
Türkçe
2022
Diş HekimliğiSağlık Bilimleri ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
DOÇ. DR. BARIŞ KARABULUT