Geri Dön

Doğrudan sıvı soğutmalı ısı emici bloğunun optimizasyonu ve soğutma performansının sayısal olarak incelenmesi

Optimization of direct liquid cooled heat sink block and numerical investigation of cooling performance

  1. Tez No: 730930
  2. Yazar: UĞUR RECEP ŞAHİN
  3. Danışmanlar: PROF. DR. SİNAN ÇALIŞKAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Makine Mühendisliği, Energy, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Hitit Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 118

Özet

Yüksek performans şartlarında çalışmak üzere tasarlanan elektronik bileşenlerin, sahip oldukları boyutların küçülmesi sonucunda birim hacim başına düşen ısı miktarı çok yüksek seviyelere çıkmaktadır. Bu sebeple ortaya çıkan ısının uzaklaştırılması, elektronik bileşen performansının maksimum seviyede tutulması ve çalışma sürelerinin uzatılması adına soğutma teknikleri önemli hale gelmiştir. Son dönemlerde yapmış olduğu etki ve ortaya koyduğu soğutma performansı ile ısı transferi uygulamalarında sıvı soğutma sistemleri sıklıkla tercih edilmektedir. Bu kapsamda gerçekleştirilen tez çalışmasında, sıvı soğutma blokları için farklı geometrilerde sayısal modeller oluşturulmuş olup akış ve ısı transferi performansının değişimi incelenmiştir. Ortaya konan modellerin oluşturulması, analizler için kullanılan parametrelerin belirlenmesi ve bu parametrelere bağlı olarak analiz planının oluşturulması için Taguchi metodundan yararlanılmıştır. Giriş, ısı alıcısı ve çıkış bölümü olmak üzere 3 bölümden oluşan sıvı soğutma bloğunda, iş akışkanı olarak saf su ve nanopartikül hacim fraksiyonu % 2 ve % 4 değerlerine sahip Al2O3/su nanoakışkanı kullanılmıştır. Ortaya konan sıvı soğutma bloğu modeli için ticari amaçla oluşturulmuş bir model temel alınmış olup belirlenen parametrelere göre en uygun model elde edilmiş ve kıyaslanmıştır. Sıvı soğutma bloğunun kullanıldığı GPU modelinin, tam yük altında maksimum sıcaklık değerinde çalıştığı kabul edilmiştir. Ayrıca ısı alıcısı tabanına etki eden ısıl güç miktarı, çalışmada referans alınan GPU (Grafik İşlemci Birimi)'nun TDP (Thermal Design Power) değerine bağlı olarak 250 W olarak belirlenmiştir. 1000-2000 Reynolds değer aralığında gerçekleştirilen çalışmada, kanal içerisine gönderilen nanoakışkanların, giriş ve ısı alıcısı bölümünde bulunan engel ve kanatçıkların akış ve ısı transfer performansı üzerindeki etkileri sayısal olarak incelenmiştir.

Özet (Çeviri)

The amount of heat per unit volume rises to very high levels due to the reduced size of electronic components designed to operate under high-performance conditions. For this reason, cooling techniques have become important to remove the heat generated, keep the electronic component performance at the maximum level and extend the working times. Liquid cooling systems are frequently preferred in heat transfer applications due to the effect it has made in recent times and their demonstrated cooling performance. In the thesis study carried out in this context, numerical models with different geometries were created for liquid cooling blocks, and the change in flow and heat transfer performances were examined. The Taguchi method was used to create the models and determine the parameters used for the analysis. It creates the analysis plan based on these parameters. Pure water and Al2O3/water nanofluid with a nanoparticle volume concentration of 2% and 4% were used as the working fluid in the liquid cooling block, consisting of 3 sections, inlet, heat sink, and outlet. A commercially created model was taken as a basis for the liquid cooling block model. The optimal model was obtained and compared according to the determined parameters. It is assumed that the GPU model, in which the liquid cooling block is used, operates at the maximum temperature under full load. In addition, the amount of thermal power affecting the base of the heat sink was determined as 250 W, depending on the TDP (Thermal Design Power) value of the GPU (Graphics Processing Unit) referenced in the study. In this study, carried out in the Reynolds numbers value range from 1000-2000 the effects of nanofluids in the channel, obstacles, and fins in the inlet and heat sink section on the flow and heat transfer performance were numerically investigated.

Benzer Tezler

  1. Aeroacoustic investigations for a refrigerator air duct and flow systems

    Buzdolabı hava kanalı ve akış sistemlerinin aeroakustik incelemesi

    HAZAL BERFİN DEMİR

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Havacılık Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    DOÇ. DR. BAYRAM ÇELİK

  2. Termoelektrik soğutucuların performansına doğrudan temaslı ısı değiştiricilerin etkilerinin deneysel incelenmesi

    Experimental examination of direct contact heat exchangers effects on the thermoelectric coolers

    MURAT FERHAT DOĞDU

    Yüksek Lisans

    Türkçe

    Türkçe

    2013

    Enerjiİstanbul Teknik Üniversitesi

    Enerji Bilim ve Teknoloji Ana Bilim Dalı

    PROF. DR. HACI OSMAN ALTUĞ ŞİŞMAN

  3. Bilgisayar işlemcileri için sıvı soğutmalı ısı değiştirici HAD analizleri

    CFD analyses of liquid-cooled heatsink for computer processors

    GÜLNAZ TOPCU

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine MühendisliğiDumlupınar Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ÜMRAN ERÇETİN

  4. An experimental and numerical investigation of immersion cooled blue LED combined with yag:ce phosphor for thermal, electrical and optical performance

    Termal, elektriksel ve optik performans için yag:ce fosfor ile birleştirilmiş sıvı soğutmalı mavi LED'in deneysel ve nümerik olarak incelenmesi

    CEREN CENGİZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Makine MühendisliğiÖzyeğin Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET ARIK

  5. Hava soğutmalı yağ soğutucusu dizaynı

    Design of air cooled oil cooler

    ATİLLA DOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. TEMEL KOTİL