Maksiller anterior tek diş implant destekli protezlerde değişik açı ve bağlantı tipleri ile kullanılan platform açılı implant ve farklı abutment materyallerinin oluşturduğu stres dağılımının üç boyutlu sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of the stress distribution in maxillary anterior single unit implant supported prosthetics with different angle and connection types using platform angled implants and different abutment materials by three dimensional finite element analysis
- Tez No: 739401
- Danışmanlar: PROF. DR. MÜNİR TOLGA YÜCEL
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental bonding, Dental destekler, Dental implantasyon, Dental implantlar, Dental protezler, Dental stres analizi, Sonlu elemanlar stres analizi, Dental bonding, Dental abutments, Dental implantation, Dental implants, Dental prosthesis, Dental stress analysis, Finite elements stress analysis
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Protetik Diş Tedavisi Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Anterior maksilladaki tek diş eksikliği implant destekli restorasyonlarla sıklıkla rehabilite edilmektedir. Bölgenin anatomik yapısı nedeniyle restorasyon aşamasında bölgede açılı abutmentlardan sıklıkla yaralanılmaktadır. Literatürde açılı abutmentların kemikte stresi arttırdığı şeklinde çalışmalar mevcuttur. Bu yüzden açıyı implant seviyesinde düzelten platform açılı implantları tanıtılmıştır. Bu çalışmada labiolingual boyuttaki açıyı abutment veya implant seviyesinde düzeltmenin kemik ve implant bileşenlerinde oluşturduğu stres analizi incelenmiştir. Bu amaçla, bilgisayar ortamında oluşturulan 16 faklı model üç boyutlu sonlu elemanlar stres analizi yöntemiyle incelenmiştir. Çalışmanın sonunda iki implant grubu için kemik ve implant bileşenlerinde farklı stres dağılımları izlenmiştir.
Özet (Çeviri)
Single tooth replacements in the anterior maxilla is often rehabilitated with implant-supported restorations. Due to the anatomical structure of the region, angled abutments are frequently used in the restoration phase. There are studies in the literature that angled abutments increase the stress on the bone. Therefore, platform angled implants that correct the angle at the implant level have been introduced. In this study, the stress analysis on bone and implant components caused by the correction of the labiolingual angle at the level of the abutment or implant was investigated. For this purpose, 16 different models created in the computer environment were examined using the three-dimensional finite element stress analysis method. At the end of the study, different stress distributions were observed in the bone and implant components for the two implant groups.
Benzer Tezler
- Maksiller anterior tek diş implant destekli protezlerde farklı abutment materyallerinin değişik açılarda kullanımının oluşturduğu streslerin sonlu elemanlar analizi metoduyla incelenmesi
Investigation of the stress caused on implant, on surrounding tissues, on abutment and on prothesis by the use of different abutment materials in different angles in single maxillary anteryor implant supported prosthesis with finite elements analysis.
SAİD MİRZA KIZMAZ
Doktora
Türkçe
2019
Diş HekimliğiDicle ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. KÖKSAL BEYDEMİR
- Assessment of hard tıssue densıty around dental ımplants usıng conventıonal radıographs
Dental implantlar çevresindeki sert doku densitesinin konvensiyonel radyograflar ile incelenmesi
WAEL ALSHAIBANI
Doktora
İngilizce
2010
Diş HekimliğiGazi ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. NUR MOLLAOĞLU
- Zigomatik implant ile rehabilite edilen bireylerde yaşam kalitesinin incelenmesi
Evaluation of quality of life in individuals rehabilitated with zygomatic implants
YAĞMUR YILMAZ
Doktora
Türkçe
2026
Diş Hekimliğiİstanbul ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. BARIŞ ALTUĞ AYDİL
- Maksiller all-on-four implant tasarımları üzerine tam ark sabit protetik üst yapılar ile hazırlanan farklı modellerin üç boyutlu sonlu elemanlar stres analiz yöntemi ile biyomekanik olarak değerlendirilmesi
Biomechanical examinations i̇n different models prepared with maxillary all-on-four i̇mplant designs and full arch fixed prosthetic upper structures: Three dimensional finite element stress analysis method
ZEKİYE BEGÜM GÜÇLÜ
Doktora
Türkçe
2020
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. AYHAN GÜRBÜZ
- Atrofik edentülöz maksillada quad zygoma, M4, transnazal ve vomer implant konfigurasyonlarının sonlu eleman yöntemi ile karşılaştırmalı biyomekanik analizi
Comparative biomechanical analysis of quad zygoma, M4, transnasal, and vomer implant configurations in the atrophic edentulous maxilla using the finite element method
AHMET YAY
Diş Hekimliği Uzmanlık
İngilizce
2026
Diş HekimliğiKaradeniz Teknik ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
DOÇ. DR. ONUR YILMAZ