A Comparative study on computer aided modeling of non circular deep drawivng
Derin çekme işleminin bilgisayar destekli ve karşılaştırmalı olarak modellenmesi
- Tez No: 75685
- Danışmanlar: PROF. DR. BİLGİN KAFTANOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Deep Drawing, Finite Element Method, Metal Forming, Computer Aided Modeling ili
- Yıl: 1998
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 175
Özet
Özet yok.
Özet (Çeviri)
ABSTRACT A COMPARATIVE STUDY ON COMPUTER AIDED MODELING OF NON CniCULAR DEEP DRAWING GÖZÜBÜYÜK, A. Serkan M.S., Department of Mechanical Engineering Supervisor: Prof. Dr. Bilgin KAFTANO?LU September 1998, 160 Pages In this study, the problem of elastic-plastic deformation of non circular deep- drawing process is modeled by means of finite element method by using the finite element method codes LS-DYNA3D, MARC and PAM-STAMP. Material used in the analysis is assumed to be isotropic and obeys the von Mises yield criteria. Moreover, work hardening characteristics of the material is also considered in the analysis. A comparison between the programs is made by solving an example model in each of the programs. The example model is chosen such that all the parameters and geometry in the model are the same as they are in literature. In this way the results of the above mentioned FEM codes are compared with the results of ABAQUS in literature. The thickness strain distributions obtained by numerical solutions are also compared with the experimental results in literature. According to the results and comparisons with the experiments, PAM-STAMP gives better results for the parameters used in the thesis.
Benzer Tezler
- Asenkron motorun farklı kontrol yöntemleri ile hız kontrolü ve raylı sistemlere uygulanması
Different control methods for speed control of asynchronous motor and application to railway systems
ALP EREN ÇALICIOĞLU
Yüksek Lisans
Türkçe
2023
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET TURAN SÖYLEMEZ
- Meme MRG'de saptanan kitle dışı kontrastlanmaların benign ve malign ayrımında radyolojik bulgularla doku analizi bulgularının makine öğrenimi yöntemleriyle değerlendirilmesi ve segmentasyon tabanlı 3 boyutlu evrişimsel sinir ağlarıyla karşılaştırılması
Evaluation of radiological and texture analysis findings using machine learning methods in the differentiation of benign and malignant non-mass enhancements detected onbreast MRI and comparison with segmentation-based three dimensional convolutional neural networks
SERHAT AKIŞ
Tıpta Uzmanlık
Türkçe
2025
Radyoloji ve Nükleer TıpDokuz Eylül ÜniversitesiRadyoloji Ana Bilim Dalı
PROF. DR. PINAR BALCI
- Bozucu-etki gözleyici tabanlı kontrol yöntemlerinin bir Gimbal üzerinde deneysel karşılaştırılması
Experimental comparison of disturbance observer based control methods on a Gimbal
MÜCAHİD RIDVAN KAPLAN
Yüksek Lisans
Türkçe
2022
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiMakine Ana Bilim Dalı
DOÇ. DR. ZEKİ YAĞIZ BAYRAKTAROĞLU
DR. ÖĞR. ÜYESİ BURAK KÜRKÇÜ
- XAU/USD prıce predıctıon usıng deep learnıng: hyperparameter optımızatıon wıth bayesıan, grey-wolf and genetıc algorıthms
Derin öğrenme kullanarak XAU/USD fiyat tahmini: bayes, gri kurt ve genetik algoritmalarla hiperparametre optimizasyonu
MELİS KÜÇÜK
Yüksek Lisans
İngilizce
2025
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
PROF. DR. FERHAN ÇEBİ