Geri Dön

Hafif agregalar içeren harçlarda farklı agrega, çimento ve elyaf tipinin ısı iletkenlik ve yangın dayanım performansına etkisi

The effect of different aggregate, cement and fiber types on thermal conductivity and fire resistance performance in mortars containing light aggregate

  1. Tez No: 767615
  2. Yazar: FERDİ ESER
  3. Danışmanlar: DOÇ. DR. TAYFUN ALTUĞ SÖYLEV
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Gebze Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 108

Özet

Bu çalışmada farklı boyutlarda ve tiplerde agrega, çimento ve elyaf tipleri kullanımları ile çimento esaslı hafif ağırlıklı sıva hazırlanmıştır. Çalışmada, yangın performansına etkisi Avrupa Normları (EN) dikkate alınmıştır. Tüm formüllerde hafif agrega olarak vermikülit ve perlit içeren hacmen aynı oranlarda kullanılmıştır. Çimento tipleri olarak, Cem I tip gri renk portland çimento, Cem I tipi beyaz renk portland çimento, kalsiyum alüminatlı çimento ve kalsiyum alüminatlı refrakter çimentolar kullanılmıştır. Çalışmalarda, farklı boyutlarda kalsiyum karbonat agregalar kullanılarak, agreganın etkisi gözlenmiştir. Kalsiyum karbonat agrega çalışmalarına ek olarak, benzer agrega boyutunda silis kumu agregası kullanılarak test performansları incelenmiştir. Son olarak da, farklı elyaf ürünleri formülasyona eklenerek, yangın dayanımına etkisi incelenmiştir. Basınç dayanımı sonuçları yanında EN 998-1 standardında yer alan diğer testler de gerçekleştirilmiştir. Sonuç olarak, tüm çalışmalarda, 800 °C derecelik ısıya 2 saat boyunca maruz kalmaları sonrasında kütle kayıpları oluştuğu ve basınç dayanım değerlerinin başlangıç değerlerine göre daha düşük basınç dayanımı performansı gösterdikleri görülmüştür. Ürünlerin performansına en yüksek etkinin elyaf kullanımı olan ürünlerde olduğu görülmüştür.

Özet (Çeviri)

In this study, cement based light weight plaster was prepared by using different sizes and types of aggregate, cement and fiber types. In the study, the effect of the European Norms (EN) on the fire performance was taken into account. In all formulas, vermiculite and perlite containing light aggregates were used in the same proportions by volume. As cement types, Cem I type gray color portland cement, Cem I type white color portland cement, calcium aluminate cement and calcium aluminate refractory cements were used. In the studies, the effect of the aggregate was observed by using calcium carbonate aggregates of different sizes. In addition to calcium carbonate aggregate studies, test performances were investigated using silica sand aggregate with similar aggregate size. Finally, different fiber products were added to the formulation and their effect on fire resistance was investigated. In addition to the compressive strength results, other tests in the EN 998-1 standard were also carried out. As a result, in all studies, it was observed that after being exposed to 800 °C heat for 2 hours, mass losses occurred and their compressive strength values showed lower compressive strength performance than the initial values. It has been observed that the highest effect on the performance of the products is in the products with fiber use.

Benzer Tezler

  1. Atık polietilen tereftalat içeren kendiliğinden yerleşen hafif geopolimer harçların taze ve sertleşmiş özelliklerinin incelenmesi

    Investigation of fresh and hardened properties of lightweight self-compacting geopolymer mortars containing waste polyethylene terephthalate

    MEHMET EMİN KİYAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    İnşaat MühendisliğiHarran Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. KASIM MERMERDAŞ

  2. Farklı çaplarda uçucu kül hafif agregası içeren geopolimer harçların farklı kür koşullarında fiziksel ve makanik özellikleri

    Physical and mechanical properties of geopolymer mortars containing diameters of fly ash light weight aggragate under different curing conditions

    MUSTAFA YENEL

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    İnşaat MühendisliğiNiğde Ömer Halisdemir Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HATİCE ÖZNUR ÖZ

  3. Study of the engineering properties of fiber-reinforced ceramic powder and slag-based geopolymer mortar produced with recycled concrete aggregates

    Geri dönüştürülmüş beton agregaları ile üretilen lif takviyeli seramik tozu ve cüruf esaslı geopolimer harcının mühendislik özelliklerinin araştırılması

    AHMAD JAMAL MAHMOUD BATAYNEH

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    İnşaat MühendisliğiYıldız Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ORHAN CANPOLAT

  4. Hafif agrega içeren yalın ve PVA lif ile güçlendirilmiş yapısal betonların mekanik özelliklerinin incelenmesi

    Investigation of mechanical properties of conventional and structural semi-lightweight concretes reinforced with PVA fibers

    MURAT EMRE DİLLİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HAKAN NURİ ATAHAN

  5. Kompozit yapıda pomza agregası içeren köpük betonun özellikleri ve teknik parametrelerinin irdelenmesi

    Investigation of characteristics and technical parameters of foam concrete containing pumice aggregates in composite structures

    MUSTAFA BEKAROĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Maden Mühendisliği ve MadencilikSüleyman Demirel Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    PROF. DR. LÜTFULLAH GÜNDÜZ