Bor mineralleri içeren yüksek yoğunluklu polietilen kompozit malzemelerin üretimi, mekanik ve termal özelliklerinin incelenmesi
Production of high density polyethylene composite materials containing boron minerals, and investigation of their mechanical and thermal properties
- Tez No: 771961
- Danışmanlar: DOÇ. DR. MUSTAFA ASLAN
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Metalurji Mühendisliği, Engineering Sciences, Metallurgical Engineering
- Anahtar Kelimeler: Ekstrüder, Enjeksiyonlar, Filament, Kolemanit, Mekanik özellikler, Polietilen, Üleksit, Extruder, Injections, Filament, Colemanite, Mechanical properties, Polyethylene, Ulexite
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Karadeniz Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada yüksek yoğunluklu polietilen (YYPE) bor minerallerinden oluşan kolemanit, üleksit ve bor oksit mineralleri ile ağırlıkça %5, %10 ve %15 oranlarda karıştırılarak ekstrüder ile filament halinde üretilmiştir. Bu filamentler daha sonra kırpılarak enjeksiyon kalıplama işlemi için hammadde olarak kullanıldı. Üretilen numuneler çekme, eğme ve darbe testlerine tabi tutulup mekanik özellikleri incelenmiştir. Deneysel veriler, numunelerin çekme deneyinde kolemanit gurubu diğer guruplara göre daha fazla çekme dayanımı ve mukavemet göstermiştir. Ayrıca numunelerin darbe deneyinde saf YYPE numunesi darbe mukavemeti diğer katkılı minerallere göre daha yüksek değer gözlemlenmiştir. Üç nokta eğilme testinde numunelerin eğilme dayanımları hemen hemen aynı seviyede olup en iyi sonucu veren %10 katkılı kolemanit / YYPE olmuştur. Fiziksel özellikleri SEM, EDS ve XRD testleri ile incelenmiş, termal analiz yöntemiyle TGA ve DSC deneyi yapılarak test sonuçları tezde kullanılmıştır.
Özet (Çeviri)
In this study, high density polyethylene (HDPE) was produced as filament by extruding by mixing 5%, 10% and 15% by weight with colemanite, ulexite and boroxide minerals consisting of boron minerals. These filaments were then clipped and used as raw material for the injection molding process. The produced samples were subjected to tensile, bending and impact tests and their mechanical properties were examined. Experimental data showed that the colemanite group showed higher tensile strength and strength than the other groups in the tensile test of the samples. In addition, in the impact test of the samples, the impact strength of the pure HDPE sample was higher than the other added minerals. In the three-point bending test, the bending strengths of the samples were almost at the same level, and 10% doped colemanite / HDPE gave the best results. Physical properties were examined with SEM, EDS and XRD tests, and TGA and DSC experiments were performed using thermal analysis method, and the test results were used in the thesis.
Benzer Tezler
- Bor karbür üretimi ve karakterizasyonu
Production of boron carbide and its characterization
EBRU KARAÇAY
Yüksek Lisans
Türkçe
2008
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. H. CANAN CABBAR
- Mechanical activation-assisted leaching with saline water or dilute acid for lithium recovery from boron processing plant tailings
Bor üretim tesisi atıklarından lityum geri kazanımı için tuzlu su veya seyreltik asit ile mekanik aktivasyon destekli liç
GÜLSEN OBUZ TEKER
Yüksek Lisans
İngilizce
2025
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiCevher Hazırlama Mühendisliği Ana Bilim Dalı
PROF. DR. FERİDUN BOYLU
- Mikronize kolemanit katkılı ultra yüksek performanslı betonların mühendislik özelliklerinin incelenmesi
Investigation of engineering properties of micronized colemanite added ultra high performance concrete
BETÜL İŞBİLİR KULA
Doktora
Türkçe
2023
İnşaat MühendisliğiDüzce ÜniversitesiKompozit Malzeme Teknolojileri Ana Bilim Dalı (disiplinlerarası)
PROF. DR. SERKAN SUBAŞI
- Püskürtmeli kurutucuda disodyum oktaborat tetrahidrat üretimi ve modelleme çalışmaları
Experimental and modelling studies of disodium octaborate tetrahydrate production in a spray dryer
ERCAN ÖZDEMİR
Doktora
Türkçe
2009
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLHAYAT NASÜN SAYGILI
- Çankırı-Eldivan yöresi bentonitinin döküm kalıp kumu özelliklerine etkisinin incelenmesi
Investigation of the effect of bentonite origined at Cankiri Eldivan region on casting mold sand properties
ESRA TÜYSÜZ
Yüksek Lisans
Türkçe
2016
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. NECİP ÜNLÜ