Endüstride kullanılan asenkron bir motorda bulanık mantık temelli kestirimci bakım uygulaması
Fuzzy logic based predictive maintenance application in an asynchronous motor
- Tez No: 776135
- Danışmanlar: DR. ÖĞR. ÜYESİ VEDAT ÖZKANER
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: İskenderun Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 99
Özet
Endüstriyel tesislerde sistemlerin süreklilik önceliği ve yüksek performans ile çalışması beklenir. Sistemin herhangi bir parçasında meydana gelebilecek bir arızanın üretim kayıplarına neden olması mümkündür. Üretim ve hizmet sektörlerinde çeşitli sistemlerin kullanılması bakım çalışmalarını mecbur kılmıştır. Arıza nedeniyle üretim ve iş gücü kayıplarının yaşanmaması için bakımların sistemlerde arızaya yol açmayacak şekilde planlanması gerekmektedir. Planlı bakım süreçlerinde gün geçtikçe kendine daha sağlam yer bulan ve uyarıcı bakım olarak da bilinen kestirimci bakım yöntemi sayesinde bakıma ihtiyaç duyacak sistemlerin bakım planlamasını arıza oluşmadan belirleyecek sistem üzerinde çalışılmıştır. Bu tezde, bir asenkron motorun çalışma koşulları sırasında elde edilen titreşim, sıcaklık ve akım değerleri PLC yardımı ile sahadan toplanmış ve daha sonra zaman etiketli olarak veri tabanına yazılarak hem test verilerinin oluşturulmasında hem de üyelik fonksiyonu değerlerinin belirlenmesinde kullanılmıştır. Sahadaki motordan toplanan veriler, motor ve enstrüman etiket değerleri ve uzman görüşlerinden yola çıkarak“Matlab Fuzzy Toolbox”uygulaması ile bulanık mantık temelli çıkarım sistemi tasarlanmıştır. Çıkarım sistemine giriş değişkeni olarak verilen test verilerinin uzman görüşleri ve katalog verileri doğrultusunda belirlenmiş kurallar ile değerlendirilmesi sonucunda üretilen çıkış değişkeniyle sistemde çalışan asenkron motorun“motor sağlığı”belirlenmektedir. Bu tez çalışması; arızanın teşhisinden ziyade tespiti ile ilgili bir çıkarım sistemi önermektedir. Endüstriyel üretim yapan işletmeler, ilk etapta toplam ekipman etkinliğini artırmak ve plansız duruşların önüne geçmek isterler. Bu nedenle motordaki arızanın içeriğinden çok arızanın yaşanma olasılığı daha önemlidir. Literatürde sadece motor stator akımları, vibrasyon analizi ve termal tabanlı analizler mevcut olup; burada akım, titreşim ve termal durum izleme sonucunda elde edilen veriler bulanık mantık ile çok açıdan değerlendirilerek motor sağlığı ve bakım ihtiyacı belirlemektedir.
Özet (Çeviri)
In industrial facilities, systems are expected to operate with high performance and the principle of continuity. A malfunction in any part of the system may cause production losses. The use of various systems in the production and service sectors necessitates maintenance. To avoid production and labor losses due to failure, it is necessary to plan maintenance in a way that does not cause malfunctions in the systems. In this project, a predictive maintenance method, also known as stimulant maintenance, which is increasingly used in planned maintenance processes, was designed. In this context, it has been studied on a system that determines the parts that will need maintenance with the fuzzy logic method before the failure occurs and prepares the maintenance plan accordingly. In this thesis, the vibration, temperature, and current values obtained during the operating conditions of an asynchronous motor were collected from the field with the help of PLC, then written to the database with timestamps, and used both to create test data and to determine membership function values. A fuzzy logic-based inference system was designed using the“MATLAB Fuzzy Toolbox”application based on the data collected from the engine in the field, engine and instrument label values, and expert opinions. The output variable determined as a result of the evaluation of the test data given as the input variable to the inference system with the rules defined in line with the expert opinions and catalog data determines the“motor health”of the asynchronous motor operating in the system. This study proposes an inference system related to the detection rather than the diagnosis of the fault. Enterprises engaged in industrial production intend to increase total equipment efficiency and prevent unplanned stoppages in the first place. Therefore, the probability of a malfunction is more important than the content of the malfunction in the engine. Only motor stator currents, vibration, and thermal-based analysis are available in the literature. In this study, the data obtained by monitoring the current, vibration, and thermal values are evaluated using fuzzy logic from many perspectives to determine motor health and maintenance needs.
Benzer Tezler
- Tek fazlı asenkron motorun hız kontrolü için ysa ayarlamalı bir bulanık mantık denetleyici
An artificial neural network tuned-FLC for single phase asynchronous motor speed control
YELİZ YILDIRIM
Yüksek Lisans
Türkçe
2014
Elektrik ve Elektronik MühendisliğiKaradeniz Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. CEMİL GÜRÜNLÜ
- Bir motor kontrol sisteminin model tabanlı donanım ve yazılım ortak tasarımı
Model-based hardware and software mutual design of a motor control system
SEDAT İN
Yüksek Lisans
Türkçe
2023
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. SIDDIKA BERNA ÖRS YALÇIN
DOÇ. DR. HASAN TİRYAKİ
- Asenkron makinalarda uzay harmoniklerini ve etkilerini azaltmaya yönelik yöntemlerin sonlu elemanlar ile analizi
Analysis of methods to reduce space harmonics and its effects in asynchronous machines with finite elements
İSMETHAN HANEDAR
Yüksek Lisans
Türkçe
2020
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ DERYA AHMET KOCABAŞ
- Design and simulation of thyristor switching system for reactive power control and motor power efficiency control
Reaktif güç kontrolü ve motor enerji verimliliği kontrolü için tristör anahtarlama sistemi tasarımı ve simülasyonu
M. MUSTAFA SAVRUN
Yüksek Lisans
İngilizce
2013
Elektrik ve Elektronik MühendisliğiÇukurova ÜniversitesiElektrik ve Elektronik Mühendisliği Bölümü
PROF. DR. MEHMET TÜMAY
- Pre-detection of stator windingfailure according to the motorcurrent signal analysis method inasynchronous motors
Asenkron motorlarda motor akım sinyali analiz yöntemine göre stator sargı hatasının ön tespiti
BERAT DENİZ
Yüksek Lisans
İngilizce
2021
Elektrik ve Elektronik MühendisliğiEuropean University of LefkeDOÇ. DR. SAMET BİRİCİK