Bakır floroboratın yüzey cevap metodu ile sentezi ve antifouling boyada kullanılabilirliği
Synthesis of copper fluoroborate by surface response method and its usability in antifouling paint
- Tez No: 779169
- Danışmanlar: PROF. DR. METİN GÜRÜ
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 115
Özet
Bu tez çalışmasında deniz taşıtlarında fouling oluşumunun önüne geçerken, deniz yaşamına zarar vermeyecek bakır floroborat esaslı boya çalışması yapılmıştır. Bakır floroborat yaş yöntemle sentezlenmiş ve sentez parametreleri için optimum değer yüzey cevap metodu ile bulunmuştur. Çalışmanın ilk aşamasında yüzey cevap metodu üzerine değişkenlerimiz olan sıcaklık, mol oranı ve süreler yazılmıştır. Bu parametreler baz alınarak yüzey cevap metodunun önerdiği toplamda 20 adet deney belirlenmiştir. Daha sonra belirtilen deneyler yüzey cevap metodunun belirttiği sırayla yapılmış ve 60 °C, 80 °C ve 100 °C'de, nHBF4/nCuO 1,7:1; 1,3:1; ve 2,1:1 mol oranlarında, 70 dakika, 110 dakika, 150 dakika süreyle yaş yöntem uygulanarak bakır floroborat sentezi gerçekleştirilmiştir. Yirmi adet yaş yöntemle sentezlenen bakır floroborat ürünün verimleri kaydedilmiştir. İkinci aşamada yaş yöntemde elde edilen verim değerleri kullanılmış ve (Optimum mol oranı, sıcaklık, süre ve verim) yüzey cevap metoduna işlenmiştir. Yüzey cevap metodunda optimum mol oranı (nHBF4/nCuO) 1,71 /1 olarak tespit edilmiştir. Çalışma optimum reaktif oranlarında 99,55 °C, 146 dakika ve %97,48 verim olarak kaydedilmiştir. Çalışmanın son aşamasında en verimli noktalar baz alınarak bakır floroborat ürün sentezi yapılmış ve saf halde, su bazlı ve solvent bazlı boya içerisinde antibakteriyel özelliği incelenmiştir. Bakır floroborat ürünün saf halde antibakteriyel özellik göstermesinin yanı sıra boya içerisinde %40 ve %70 oranlarında bulunduğu durumlarda da antibakteriyel olduğu gözlenmiştir.
Özet (Çeviri)
In this study, while preventing the creation of fouling in sea boats, copper fluoroborate based paint work was performed that would not affect marine life. The wet technique was used to synthesize copper fluoroborate, and the surface response method was used to determine the optimal value for synthesis parameters. In the first stage of research, recorded our variables such as temperature, mole rate, and durations on the surface response technique. Based on these parameters, a total of 20 experiments proposed by the surface response method were determined. The following experiments were carried out in the order specified by the surface response method and at 60 °C, 80 °C and 100 °C, nHBF4/nCuO 1.7:1; 1.3:1; and 2.1:1 mole ratios, 70 minute, 110 minute, 150 minute by wet method, copper fluoroborate synthesis was carried out. The yields of the experiments synthesized by the wet method were noted. In the second stage, the yield values obtained in the wet method were used and (optimal molar ratio, temperature, time and yield) were processed into the response surface method. The optimal mol ratio (nHBF4/nCuO) in the surface response method is 1.71/1. The study was recorded as 99.55 °C, 146 minutes and 97.48% efficiency at optimum reagent rates. In the last part of the study, copper fluoroborate product synthesis was made based on the most efficient points and its antibacterial properties pure copper fluoroborate, in water-based and solvent-based paint were examined. It has been observed that the pure copper fluoroborate is antibacterial, as well as the water-based paint and solvent-based paint include with %40, %70 copper fluoroborate is antibacterial.
Benzer Tezler
- Fenol ve bor esaslı pigment sentezi ve deniz canlılarından korumalı boyada kullanılabilirliği
Phenol and boron based pigment synthesis and usability in protected paint from marine creatures
ŞEYMA OLGUN
Yüksek Lisans
Türkçe
2021
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. METİN GÜRÜ
- Bakır floroborat sentezi ve alev geciktirici olarak kullanılabilirliği
Synthesis of copper fluoroborate and usability as flame retardant
DİLEK İPEK
Yüksek Lisans
Türkçe
2018
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. METİN GÜRÜ
- Electroinitiated polymerization of bis (trihalophenoxo) ethylenediamine copper (II) complexes
Başlık çevirisi yok
SEMİH YİĞİT
- Bazı metal kombinasyonlarının tavuk embriyolarında teratojenik etkileri: Bakır, molibden ve kadmiyumun etkileri
Teratogenic effects of combined some metals on chick embryos: Effects of copper, molybdenum and cadmium
ŞENOL YILMAZ
Yüksek Lisans
Türkçe
1997
Eczacılık ve FarmakolojiAnkara ÜniversitesiFarmakoloji ve Toksikoloji Ana Bilim Dalı
DOÇ. DR. EMİNE BAYDAN
- Production of Cu-based shape memory alloys by powder metallurgy
Bakır esaslı şekil bellekli alaşımların toz metalurjisi yöntemiyle üretimi
ARCAN FEHMİ DERİCİOĞLU
Yüksek Lisans
İngilizce
1999
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. BİLGEHAN ÖGEL