Geri Dön

Kağıt yüzeyinin kaplanmasında nişasta kullanımı

Usability of strach in coating

  1. Tez No: 77990
  2. Yazar: ÖZNUR ÖZDEN
  3. Danışmanlar: PROF. DR. EROL GÖKSEL
  4. Tez Türü: Doktora
  5. Konular: Ormancılık ve Orman Mühendisliği, Forestry and Forest Engineering
  6. Anahtar Kelimeler: Kağıt, Nişasta, Yüzey kaplama malzemeleri, Paper, Starch, Surface coating materials
  7. Yıl: 1998
  8. Dil: Türkçe
  9. Üniversite: İstanbul Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Orman Endüstri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

SUMMARY Usability of Starch in Coating." The purpose of this study was to select the papers that have the highest degree of physical and optical properties and printability. Because of two different base paper were coated on the Dixon-pilot coater. Properties of base paper A and B and their mixture are listed in table 13 and 14. Three different starch of AVABE were used in the coating mixture Other chemicals were chosen from SEKA - Dalaman coating unit. 13% of total binder (styrene - butadien latex and oxidised potato starch) in the coating mixture, were used The coating mixture was prepared in a Kady Mill for 10 minutes and adjusted to 60% solid (dry content) and pH 7.5-8. The viscosity measured in a Brookfield viscosimeter at 100 r. p.m.. Dixon-Pilot coater was used for coating. The coated papers were calendered by passing through the nips of a super calender. The properties of the coated papers were evaluated by ordinary laboratory methods at the laboratory of SEKA -Dalaman mill. The papers were conditioned to 50% RH and 23 °C prior to the measurements. Table 24-25 shows the results of properties. And also, statistical calculations were applied on the results (F and T Tests) Perfectamyl A 4692, that used at the range of 7-9 % together with latex, were found the best for all properties. 104Araştırmada elde edilen fiziksel ve optik özelliklere ait ortalama değerler, her bir etki faktörüne göre tablo.24 ve 25 de verilmektedir. Denenen nişastalar sonucunda A4692 tipi nişastanın %7-9 oranında, B baz kağıdında kullanılmasının iyi sonuç verdiği saptanmıştır. Sonuçta, araştırmada kuşelemedeki etki faktörleri olarak incelenen baz kağıt türü, nişasta türü ve nişasta oranının kuşe kağıt özelliklerine olan karşılıklı etkilerinin genellikle önemli oldukları tespit edilmiştir. 103

Özet (Çeviri)

SUMMARY Usability of Starch in Coating." The purpose of this study was to select the papers that have the highest degree of physical and optical properties and printability. Because of two different base paper were coated on the Dixon-pilot coater. Properties of base paper A and B and their mixture are listed in table 13 and 14. Three different starch of AVABE were used in the coating mixture Other chemicals were chosen from SEKA - Dalaman coating unit. 13% of total binder (styrene - butadien latex and oxidised potato starch) in the coating mixture, were used The coating mixture was prepared in a Kady Mill for 10 minutes and adjusted to 60% solid (dry content) and pH 7.5-8. The viscosity measured in a Brookfield viscosimeter at 100 r. p.m.. Dixon-Pilot coater was used for coating. The coated papers were calendered by passing through the nips of a super calender. The properties of the coated papers were evaluated by ordinary laboratory methods at the laboratory of SEKA -Dalaman mill. The papers were conditioned to 50% RH and 23 °C prior to the measurements. Table 24-25 shows the results of properties. And also, statistical calculations were applied on the results (F and T Tests) Perfectamyl A 4692, that used at the range of 7-9 % together with latex, were found the best for all properties. 104

Benzer Tezler

  1. Kağıt yüzeyinin suda çözünen bileşiklerle kaplanmasında bazı pigmentlerin fonksiyonları

    The Functions of some pigments used in the composition of the water soluble paper coating

    ÖZNUR ÖZDEN

    Yüksek Lisans

    Türkçe

    Türkçe

    1992

    Ormancılık ve Orman Mühendisliğiİstanbul Üniversitesi

    Orman Endüstri Mühendisliği Ana Bilim Dalı

    PROF.DR. TURAN TANIK

  2. Microbial decontamination of food packaging films using corona non-thermal plasma

    Korona deşarjlı soğuk plazma uygulaması ile gıda ambalaj filmlerinin mikrobiyal dekontaminasyonu

    EMİNE GİZEM ACAR

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Gıda Mühendisliğiİstanbul Teknik Üniversitesi

    Gıda Teknolojisi Ana Bilim Dalı

    PROF. DR. GÜRBÜZ GÜNEŞ

  3. Mobil telefon kullanımına bağlı oluşan 900-1800 mhz radyo frekans dalgalarının meydana getirdiği elektromanyetik alanın iliak kanat kemik mineral yoğunluğuna etkisi

    The effect of electromagnetic fields on bone mineral density of iliac bone produced by 900-1800 mhz radio frequency waves dependent on cellular phone usage

    BEŞİR ANDAÇ AKSOY

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2006

    Ortopedi ve TravmatolojiSüleyman Demirel Üniversitesi

    Ortopedi ve Travmatoloji Ana Bilim Dalı

    PROF.DR. NEVRES HÜRRİYET AYDOĞAN

  4. Synthesis and characterization of one-side polypyrrole coated conductive and flexible polyurethane films

    Tek yüzeyi polipirol kaplı iletken ve esnek poliüretan filmlerin sentez ve karakterizasyonu

    MELİS KARAKUŞ

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. BELKIZ USTAMEHMETOĞLU

  5. Selüloz tabanlı ve karışım kaplamalı biyobozunur tekstil kompozit malzeme hazırlanması, karakterizasyonu ve yüzey özelliklerinin incelenmesi

    Preparation of cellulose based and mix coated biodegradable textile composite material, investigation of its characterization and surface properties

    TARIK BARKIN KOÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. MERAL KARAKIŞLA