Geri Dön

Выпускная квалификационная работа специалиста дипломная работапроект аэс мощностью 600 мвт в мерсине, турции

Başlık çevirisi mevcut değil.

  1. Tez No: 780477
  2. Yazar: HAKKI ALP YAĞLI
  3. Danışmanlar: Belirtilmemiş.
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Nükleer Mühendislik, Energy, Nuclear Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Rusça
  9. Üniversite: Peter the Great St. Petersburg Polytechnic University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 121

Özet

В данной работе выполнен проект атомной электростанции мощностью 600 МВт с реакторам типа ВВЭР-600. Проведен и обоснован выбор площадки размещения АЭС, выполнен расчет тепловой схемы энергоблока АЭС, целью которого были характеристиких основных параметров энергоблока, включая давления и температуры генерируемого пара, давления конденсации, оптимальной температуры питательной воды, а также число подогревателей. В ходе расчета тепловой схемы энергоблока АЭС были вычислены расходы в элеметных схемах, эдектрическая мощность и КПД брутто и нетто АЭС. Осуществлен теплогидравлический расчет реактора, целью которого была определение характеристик, необходимых для оценки теплотехнической надежности активной зоны, проведение нейтронно-физического и прочностных расчетов реактора, выбор оборудования первого контура установки. Благодаря ему возможно определить следующие характеристики: расход теплоносителя через реактор; распределение расходов по каналам активной зоны; гидравлические сопротивления различных участков контура циркуляции теплоносителя, степень дросселирования потока теплоносителя в отдельные каналы, соответствующие выбранному принципу формирования активной зоны, теплотехнические параметры теплоносителя; поля температур в ТВЭЛах и элементах конструкции АЗ.

Özet (Çeviri)

In this work, the design of a 600 MW nuclear power plant with VVER-600 reactors is carried out. The choice of the NPP site was made and justified, the thermal diagram of the NPP power unit was calculated, the purpose of which was the main parameters of the NPP power unit with VVER, including the pressure and temperature of the generated steam, condensation pressure, optimal feed water temperature, and the number of heaters. In the course of calculating the thermal diagram of the NPP power unit, the costs in the element diagrams, the electrical power and the gross and net efficiency of the NPP were calculated. A thermohydraulic calculation of the reactor was carried out, the purpose of which was to determine the characteristics necessary for assessing the thermotechnical reliability of the core, to carry out neutronic and strength calculations of the reactor, and to select the equipment of the first circuit of the installation. Thanks to it, it is possible to determine the following characteristics: the flow rate of the coolant through the reactor; distribution of flow rates along the core channels; hydraulic resistances of different sections of the coolant circulation circuit, the degree of throttling of the coolant flow into separate channels corresponding to the selected principle of the core formation, thermal engineering parameters of the coolant; temperature fields in fuel rods and core structural elements.

Benzer Tezler