Geri Dön

Выпускная квалификационная работа специалиста дипломная работапроект аэс мощностью 1200 мвт в провинции кыркларели кыйыкей, турция

Başlık çevirisi mevcut değil.

  1. Tez No: 780485
  2. Yazar: NECMETTİN SUBAŞI
  3. Danışmanlar: Belirtilmemiş.
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Nükleer Mühendislik, Energy, Nuclear Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Rusça
  9. Üniversite: Peter the Great St. Petersburg Polytechnic University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 95

Özet

Тема выпускной квалификационной работы: « Проект АЭС мощностью 1200 МВт в провинции Кыйыкёй,Турция ». Выполнено проектирование атомной электростанции мощностью 1200 МВт с реакторами типа ВВЭР-1200. Осуществлено обоснование выбора площадки размещения АЭС, выполнен расчет тепловой схемы проектируемого энергоблока АЭС, проведены теплогидравлический расчет реактора. В данной работе разработан водо-водяной корпусной энергетический ядерный реактора с водой под давлением. При разработке было выбрано место размещения АЭС, был разработан генеральный план АЭС. Правильный выбор места для строительства атомной электростанции обеспечит безопасную эксплуатацию станции, высокую экономическую эффективность, безопасность энергоснабжения и внесет вклад в защиту окружающей среды. Также был произведен расчет тепловой схемы энергоблока, целью которого было определение характеристик второго контура, КПД нетто станции. Также был произведен теплогидравлический расчет реактора, целью которого было определение геометрических характеристик реактора, а также основных параметров таких как расход теплоносителя, температура оболочки твэла, температура топлива. В ходе гидравлического расчета были вычислены потери давления теплоносителя на различных участках движения. На основе этих расчетов был выбран оптимальный вариант скорости движения теплоносителя.

Özet (Çeviri)

The subject of the graduate qualification work is :“Project of a 1200 MW NPP in the province of Kıyıköy, Turkey”. The design of a nuclear power plant with a capacity of 1200 MW with VVER1200 reactors was completed. The substantiation of the choice of the NPP location site was carried out, the thermal scheme of the designed power unit of the NPP was calculated, and the reactor was thermal-hydraulic calculated. In this work, a pressurized water-cooled pressurized water-cooled power nuclear reactor has been developed. During the development, the location of the NPP was chosen, and the general plan of the NPP was developed. Choosing the right site for the construction of a nuclear power plant will ensure safe operation of the plant, high economic efficiency, security of energy supply and will contribute to environmental protection. Also, the thermal diagram of the power unit was calculated, the purpose of which was to determine the characteristics of the second circuit, the net efficiency of the station. A thermohydraulic calculation of the reactor was also carried out, the purpose of which was to determine the geometric characteristics of the reactor, as well as basic parameters such as coolant flow rate, fuel element cladding temperature, fuel temperature. During the hydraulic calculation, the pressure loss of the coolant in various sections of the movement was calculated. Based on these calculations, the optimal variant of the coolant velocity was chosen.

Benzer Tezler