Geri Dön

Выпускная квалификационная работа специалистадипломная работапроект аэс мощностью 600 мвтв провинции адана, турция

Başlık çevirisi mevcut değil.

  1. Tez No: 851622
  2. Yazar: MEHMET SUAT ÇAKIR
  3. Danışmanlar: DR. Калютик А.А.
  4. Tez Türü: Yüksek Lisans
  5. Konular: Nükleer Mühendislik, Nuclear Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: İngilizce
  9. Üniversite: Peter the Great St. Petersburg Polytechnic University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 97

Özet

В данной работе разработан проект АЭС с реакторами типа ВВЭР мощностью 600 МВт. Произведен и обоснован выбор площадки размещения АЭС и разработан генеральный план проектируемой АЭС. Выполнен расчет тепловой схемы энергоблока АЭС, целью которого было определение давления и температуры генерируемого пара, давления конденсации, оптимальной температуры питательной воды, давления в деаэраторе, давление и температуры подогревателей сетевой воды, число насосов и подогревателей. В ходе расчета тепловой схемы энергоблока АЭС были вычислены расходы в элементах схемы, электрическая мощность и КПД брутто и нетто АЭС. Также был произведен теплогидравлический расчет реактора, целью которого было определение геометрических характеристик реактора, а также основных параметров таких как расход теплоносителя, температура оболочки твэла, температура топлива. В ходе гидравлического расчета были вычислены потери давления теплоносителя на различных участках движения. На основе этих расчетов был выбран оптимальный вариант скорости движения теплоносителя.

Özet (Çeviri)

In this work, a project of a nuclear power plant with VVER type reactors with a capacity of 600 MW was developed. The choice of the NPP site was made and justified, the calculation of the thermal scheme of the NPP power unit was performed, the purpose of which was to determine the pressure and temperature of the generated steam, the condensation pressure, the optimum feed water temperature, deaerator pressure, pressure and temperature of heating water heaters, number of pumps, number of superheats, steam pressure and humidity each compartment at high pressure and low pressure heaters, as well as the number of heaters, as well as the number of heaters. During the calculation of the thermal scheme of the NPP power unit, the expenses in the element schemes, the electric power and the gross and net efficiency of the NPP were calculated. Also, a thermohydraulic calculation of the reactor was carried out, the purpose of which was to determine the geometric characteristics of the reactor, as well as the main parameters such as coolant flow rate, fuel-element cladding temperature, fuel temperature. During the hydraulic calculation, the coolant pressure losses were calculated at various sections of the movement. On the basis of these calculations, the optimal variant of the speed of movement of the coolant was selected

Benzer Tezler