Sagittal split ramus osteotomisi'nde titanyum plaklar ve karbon fiber destekli polimer plakların stabilizasyona ve temporomandibular eklem'e etkisinin sonlu eleman analizi yöntemiyle incelenmesi
Finite element analysis of the effects of titanium fixation plates and carbon fiber reinforced polimer fixation plates on stabilization and temporomandibular joint in sagittal split ramus osteotomy
- Tez No: 782846
- Danışmanlar: DR. ÖĞR. ÜYESİ MEHMET ZAHİT BAŞ
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Sağlık Bilimleri Üniversitesi
- Enstitü: Hamidiye Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Ağız Diş ve Çene Cerrahisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 128
Özet
Amaç: Bu çalışmanın amacı, sagittal split ramus osteotomisi fiksasyonunda kullanılan titanyum plak ve vidaların dezavantajlarını azaltabilecek bir materyalin (CFR-PEEK) biyomekanik özelliklerini incelemektir. Bundan dolayı, elastiklik modülü kortikal kemiğe oldukça yakın değerlerde üretilebilecek olan CFR-PEEK plak ve vidaların stabilizasyona ve temporomandibular ekleme etkisi sonlu eleman analizi yöntemiyle karşılaştırılmıştır. Gereç ve Yöntem: Oluşturulan mandibula modelinde SSRO, Obwegeser-Dal Pont tekniğiyle uygulanmıştır. 7 mm ilerletme gerçekleştirilmiş ve çiğneme kasları simule edilmiştir. Tüm modeller dişlerin oklüzal yüzlerinden ve temporal kemiğin en tepe noktasından kısıtlanmıştır. Titanyum ve CFR-PEEK materyaller kullanılarak 3 farklı dizayna sahip (miniplak, hibrit ve ters-L) sahip 8 fiksasyon grubu oluşturulmuştur. Osteotomi hatlarındaki deplasman değerleri, fiksasyon cihazları üzerindeki Von Mises stres değerleri, vida deliklerindeki kemik üzerinde ve Temporomandibular eklemde oluşan maksimum çekme ve maksimum basma stres değerleri kıyaslanarak incelenmiştir. Bulgular: Çalışmamızın sonuçlarına bakıldığında titanyum fiksasyon cihazları kullanılan modellerde, CFR-PEEK polimeri kullanılan modeller ile kıyaslandığında osteotomi hattında daha az deplasman, fiksasyon cihazı üzerinde ve ilişkili kemik üzerinde daha fazla stres ve TME'de ise daha az stres izlenmiştir. Fiksasyon dizaynları açısından bakıldığında ise en az deplasman ters-L tekniğinde, en düşük plak-vida stresi Hibrit tekniğinde, en düşük ilişkili kemik stresi ters-L tekniğinde ve en yüksek eklem diski stresi miniplak tekniğinde gözlenmiştir. Çalışmamızda CFR-PEEK materyalin kullanıldığı vida ve plakların üzerinde oluşan streslerin tamamı literatürde belirtilen akma dayanımı değerlerinin altında gözlenmiştir. Sonuç: Bütün bu sonuçlar göz önünde bulundurulduğunda CFR-PEEK fiksasyon sistemlerinin, daha ileri araştırmalar ve elde edilecek olumlu sonuçlar neticesinde titanyum fiksasyon sistemlerinin dezavantajlarını kapatabilecek iyi bir alternatif olabileceği görüşündeyiz.
Özet (Çeviri)
Aim: The aim of this study is to examine the biomechanical properties of a material (CFR-PEEK) that can reduce the disadvantages of titanium plates and screws used in sagittal split ramus osteotomy fixation. Therefore, the effect of CFR-PEEK plates and screws, whose modulus of elasticity can be produced at values very close to cortical bone, on stabilization and temporomandibular joint was compared with the finite element analysis method. Materials and Methods: In the created mandible model, SSRO was applied with the Obwegeser-Dal Pont technique. A 7 mm advancement was performed and muscles of mastication were simulated. All models are constrained from the occlusal surfaces of the teeth and the apex of the temporal bone. Using titanium and CFR-PEEK materials, 8 fixation groups with 3 different designs (miniplate, hybrid and reverse-L) were created. The displacement values in the osteotomy lines, the Von Mises stress values on the fixation devices, the maximum tensile and maximum compression stress values on the bone in contact with the screws and the temporomandibular joint were compared. Results: According to the results of our study, the models using titanium fixation devices were observed to have less displacement in the osteotomy line, more stress on the fixation device and the bone in contact, and less stress on the TMJ compared to the models using CFR-PEEK polymer. In terms of fixation designs, the lowest displacement was observed in the Inverted-L technique, the lowest plate-screw stress was observed in the Hybrid technique, the lowest contact bone stress was observed in the Inverted-L technique, and the highest articular disc stress was observed in the miniplate technique. In our study, all of the stresses on the screws and plates using CFR-PEEK material were observed below the yield strength values specified in the literature. Conclusion: Considering all these results, we believe that CFR-PEEK fixation systems can be a good alternative by eliminating the disadvantages of titanium fixation systems as a result of further research and positive results to be obtained.
Benzer Tezler
- Sagital split ramus osteotomisinde rezorbe olabilen ve titanyum bikortikal vida fiksasyonlarının stabilitelerinin karşılaştırılması
Başlık çevirisi yok
ÜLKEM CİLASUN
Doktora
Türkçe
2005
Diş HekimliğiBaşkent ÜniversitesiAğız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
PROF.DR. SİNA UÇKAN
- Sagittal split ramus osteotomisinde farklı kortikal kemik kalınlıklarında farklı çap ve boydaki vidaların fiksasyon etkisinin sonlu eleman analizi ile incelenmesi
Stability of sagittal split osteotomy fixation system using different screw dimensions in correlation to cortical bone thickness a finite element study
MUHAMMED HUMAM TELLOOĞLU
Doktora
Türkçe
2020
Diş Hekimliğiİstanbul Medipol ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
Prof. Dr. SİNA UÇKAN
- Kilitli vida ve plak sisteminin sagittal split ramus osteotomisinde kullanılmasının üç boyutlu modelleme ve sonlu elemanlar analiziyle incelenmesi
Evaluation of locking plate/screw system after sagittal split ramus osteotomy: A three dimensional finite element analysis
YENER OĞUZ
Doktora
Türkçe
2007
Diş HekimliğiBaşkent ÜniversitesiAğız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
PROF.DR. İBRAHİM SİNA UÇKAN
- Sagittal split osteotomisinde kullanılan fiksasyon türünün ve materyalinin operasyon stabilizasyonuna olan etkisinin sonlu eleman analizi yöntemiyle incelenmesi
Finite element analysis evaluation of stabilisation of sagittal split ramus osteotomy with different fixation TYPE and materials
ERDOĞAN UTKU ÜRETÜRK
Doktora
Türkçe
2015
Diş Hekimliğiİstanbul ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. AYŞEGÜL APAYDIN
- Le fort ı osteotomisinde iki ve dört plak ile fiksasyonun cerrahi sonrası stabiliteye etkisinin karşılaştırılması
Comparison of the postoperative stability after repositioning of the maxilla with le fort i osteotomy using 4 versus 2 plate fixation
ESRA BEYLER
Doktora
Türkçe
2019
Diş HekimliğiBaşkent ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NUR ALTIPARMAK