Natural composite constructions for high performance yacht hulls
Başlık çevirisi mevcut değil.
- Tez No: 797793
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Yüksek Lisans
- Konular: Denizcilik, Gemi Mühendisliği, Mühendislik Bilimleri, Marine, Marine Engineering, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: University of Southampton
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 62
Özet
Özet yok.
Özet (Çeviri)
Today, composite materials are widely used in almost every industry. The maritime industry is one of the leading industries that extensively adopts such composite materials. Using composite materials in the maritime industry has many advantages. Along with reasonable mechanical properties and corrosion resistance, weight advantages make the composite materials appealing for use, as well. Conventional composites, however, are neither biodegradable nor recyclable meaning that when they complete their lifecycle, they will cause some environmental problems in the future. The creation and implementation of biocomposites are, therefore, necessary for eradicating such problems. Along with their environmental advantages, though, natural composites must also meet the demands of the industries that utilise composite materials in their products. The primary demands of manufacturers are more likely to be good mechanical and physical properties. This report presents experimental investigations on the mechanical properties of both conventional and bio-derived composites; specifically, e-glass/epoxy composites and flax/bio-derived epoxy composites were studied in terms of their tensile, flexural and impact behaviours under quasi static tensile testing, flexural testing and drop weight impact testing. The results of each test have been comparatively presented and corresponding graphs have been plotted.
Benzer Tezler
- Enerji depolamada yenilikçi karbon yapılı esnek yüzeylerin üretimi ve analizi
Production and analysis of novel carbon structured flexible surfaces for energy storage applications
ESRA ŞERİFE KILIÇ
Doktora
Türkçe
2024
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ DEMİR
- Sandviç kompozitler ve mimarlıkta kullanım olanakları
Başlık çevirisi yok
BANU YILDIRIM
Yüksek Lisans
Türkçe
1998
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. NİHAT TOYDEMİR
- Volkanik hafif agregaların MgO esaslı yalıtım amaçlı plaka üretimi ve değerlendirilmesi
Evaluation of volcanic lightweight aggregates to produce MgO based plate for insulation purposes
İSMAİL ELMAKUŞU
Yüksek Lisans
Türkçe
2013
Maden Mühendisliği ve MadencilikSüleyman Demirel ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
PROF. DR. LÜTFULLAH GÜNDÜZ
- Performans yaklaşımı ile yapı bileşenlerinin değerlendirilmesi için bir yöntem üzerine inceleme
Research on a system for evaluating materials that make up the fabric of buildings with the performance approach
AYŞE YONCA SİRMEN
Yüksek Lisans
Türkçe
1997
Mimarlıkİstanbul Teknik ÜniversitesiYapı Bilgisi Ana Bilim Dalı
PROF. DR. ERTAN ÖZKAN
- CCB nano partiküllerle güçlendirilmiş ahşap yapı elemanlarının mekanik özelliklerinin incelenmesi
Investigation of mechanical properties of wood structural elements reinforced with CCB nano-particles
TAHİR AKGÜL
Doktora
Türkçe
2013
Metalurji MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET CELAL APAY