Farklı tipteki atıksuların beton dayanımı üzerine etkisinin araştırılması
Investigation of the effect of different types of wastewater on concrete strength
- Tez No: 798137
- Danışmanlar: DOÇ. DR. MURAT TOPAL
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Munzur Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Çevre Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Çevre Mühendisliği Bilim Dalı
- Sayfa Sayısı: 43
Özet
Bu tez çalışmasının ana amacı farklı tipteki atıksuların beton dayanımı üzerine etkisinin araştırılmasıdır. Bu amaçla, beton yapımında kullanılan su yerine atıksu arıtma tesisi çıkış suları, kümes hayvanları kesimhanesi çıkış suları ve katı atık depolama sahası sızıntı suları kullanıldı. Beton numuneleri elde edildikten sonra 7 ve 28 günlük basınç dayanımı değerleri belirlendi. Elde edilen analiz sonuçlarına göre, arıtma tesisi çıkış sularının kullanıldığı betonun 7 ve 28 gün için ortalama basınç dayanımı değerleri 34,33 ve 37,18 N/mm2 olarak belirlendi. Kümes hayvanları kesimhanesi çıkış sularının kullanıldığı betonun 7 ve 28 gün için ortalama basınç dayanımı değerleri 32,49 ve 36,56 N/mm2 olarak tespit edildi. Sızıntı sularının kullanıldığı betonun 7 ve 28 günlük ortalama basınç dayanımı değerleri ise 31,35 ve 34,69 N/mm2 olarak belirlendi. Sonuç olarak, su yerine atıksu arıtma tesisi çıkış suları kullanıldığında 7 ve 28 günlük basınç dayanımı değerlerinin kontrole göre %15,23 ve %21,73 oranında azaldığı, kümes hayvanları kesimhanesi çıkış suları kullanıldığında 7 ve 28 günlük basınç dayanımı değerinin kontrole göre %19,78 ve %24,31 oranında azaldığı ve sızıntı suları kullanıldığında ise 7 ve 28 günlük basınç dayanımı değerinin kontrole göre %22,59 ve %28,18 oranında azaldığı belirlendi.
Özet (Çeviri)
The main purpose of this thesis is to investigate the effects of different types of wastewater on concrete strength. For this purpose, wastewater treatment plant effluent, poultry slaughterhouse effluent and solid waste landfill leachate were used instead of water used in concrete production. After the concrete samples were obtained, the compressive strength values of 7 and 28 days were determined. According to the results of the analysis, the average compressive strength values of the concrete that the treatment plant effluent is used were determined as 34.33 and 37.18 N/mm2 for 7 and 28 days. Average compressive strength values of the concrete using the effluent of the poultry slaughterhouse were found to be 32.49 and 36.56 N/mm2 for 7 and 28 days. Average compressive strength values of the concrete for 7 and 28 days, in which leachate was used, was determined as 31.35 and 34.69 N/mm2. As a result, it was determined that when wastewater treatment plant effluent is used instead of water, the 7 and 28 day compressive strength values decreased by 15.23% and 21.73% compared to the control, the 7 and 28 day compressive strength values were 19.78% and 24.31% when the poultry slaughterhouse effluent was used, and 7 and 28 days compressive strength values decreased by 22.59% and 28.18% compared to the control when leachate was used.
Benzer Tezler
- Taban külü atığı ve pomza agregası kullanılarak çimento esaslı ve geri dönüştürülmüş polietilen tereftalat (PET) içerikli kompozit üretimi ve optimizasyonu
Production and optimization of cement based and recycled polyethylene terephthalate (PET) composite using bottom ash waste and pumice aggregate
ARZU ÇAKMAK
Doktora
Türkçe
2023
MimarlıkAkdeniz ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. HACER MUTLU DANACI
DOÇ. DR. SALİH TANER YILDIRIM
- Alkalilerle aktive edilmiş yüksek fırın cüruflu farklı tipteki mikro lifli harçların özelliklerinin araştırılması
Investigation of properties of alkali activated blast furnace slag mortars with addition different type microfiber
AHMET KAAN YILDIRIM
Yüksek Lisans
Türkçe
2019
İnşaat MühendisliğiKocaeli Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. SALİH TANER YILDIRIM
- Elazığ ilinde farklı tipteki atıksuların deşarj edildiği alıcı ortamlarda su, sediment ve sucul bitkilerde ağır metal düzeylerinin belirlenmesi
Determination of heavy metal levels in water, sediment and aquatic plants in recipient environments where different types of wastewater are discharged in the elazig region
MERVE ŞAŞMAZ KIŞLIOĞLU
Doktora
Türkçe
2021
Çevre MühendisliğiFırat ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLŞAD USLU ŞENEL
- Metal kaplama atık sularının arıtımında döküm atıklarının fenton yöntemine uygulanabilirliğinin araştırılması
Investigation of the application of foundry wastes to the fenton method for the treatment of metal plating wastewater
MUSTAFA YEMEN
Yüksek Lisans
Türkçe
2019
Çevre MühendisliğiNevşehir Hacı Bektaş Veli ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HÜSEYİN CÜCE
- Advanced oxidative teratment of chlorinated hydrocarbons
Klorlu hidrokarbonların ileri oksidasyon ile arıtımı
NEVAL BAYCAN
Doktora
İngilizce
2005
Çevre MühendisliğiDokuz Eylül ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. FÜSUN ŞENGÜL
PROF. DR. ERWİN THOMANETZ