Evaluation of sls-made pa12 under uniaxial tensile test
Başlık çevirisi mevcut değil.
- Tez No: 799061
- Danışmanlar: PROF. ALESSANDRO AIROLDI
- Tez Türü: Yüksek Lisans
- Konular: Havacılık ve Uzay Mühendisliği, Aeronautical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: İngilizce
- Üniversite: Polıtecnıco Dı Mılano
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The morphing structures provide a development in aero field applications and they are being a realistic imitation of nature over time, bringing good efficiencies in many factors with respect to the conventional methodologies. On the other hand, these structures have some not-well predicted behaviors with new material applications. Polyamide 12 (PA12) is one of these new century materials manufactured by one of unconventional technologies, namely Selective Laser Sintering (SLS). Based on the morphing structures, the hexachiral and hexachiral tessellation morphologies are two of the in-demand researches not only in aero field but also in many other fields. As a sub-field of these researches, out-of-plane and in-plane crashworthiness of the hexachiral morphologies are being a great subject to be examined. Moreover, even there are many researches belong to out-of-plane crashworthiness, solely a limited number of resources for in-plane behavior can be found in literature. As a study case which tries to lighten up the material characteristics by considering in-plane behavior for further, SLS-made of PA12 specimens are subjected to uniaxial tensile tests in the current thesis. The main parameters were the orientation of manufacturing of the specimens which are produced in perpendicular orientations, and four different strain rates, namely one quasi-static and three dynamic conditions. The results showed that the Horizontal orientation represents the material specifications for the aim of usage in aero field better than the Vertical orientation. In dynamic tests, materials showed brittle behavior. With increasing strain rate, specimens have reached to UTS at relatively lower strains. However, for a consistent comparison of yield stresses, it is needed to perform more tests per each specimen. Furthermore, the numerical correlations are completed successfully.
Benzer Tezler
- Yatay destekli kalıcı iksa yapılarının kazı destek yapıları yönetmeliğine uygun tasarımı
Design of horizontal supported permanent retaining structures in accordance with the excavation support structures code
TURHAN KARA
Yüksek Lisans
Türkçe
2024
İnşaat Mühendisliğiİstanbul Üniversitesi-Cerrahpaşaİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. CİHAN ÖSER
- Hipertrofik kardiyomiyopatide miyokardiyal fibrozisin değerlendirilmesinde kardiyak manyetik rezonans T1, T2 haritalama teknikleri ile strain analizinin etkinliği
The efficacy of cardiac magnetic resonance T1 and T2 mapping techniques and strain analysis in the assessment of myocardial fibrosis in hypertrophic cardiomyopathy
BEHLÜL ATALAY
Tıpta Uzmanlık
Türkçe
2025
Radyoloji ve Nükleer TıpSağlık BakanlığıRadyoloji Ana Bilim Dalı
UZMAN ESİN KURTULUŞ ÖZTÜRK
- Özel geometriyle pürüzlendirilmiş ve hafifletilmiş kalça implantının tasarımı ve lazer sinterleme yöntemi ile imalatı
The design of roughened and lightened hip implant with special geometry and manufacturing by laser sintering method
YUNUS EMRE DELİKANLI
Doktora
Türkçe
2017
BiyomühendislikSüleyman Demirel ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET CENGİZ KAYACAN
- Kolostomili bireylerde stoma torbasına konulan farklı esansiyel yağların kokunun giderilmesine, yaşam doyumu ve stoma uyumuna etkisi
Effects of different essential oils in stoma bags in removal of odor in individuals with colostomy, life satisfaction and effect on stoma fit
DUDU ALPTEKİN
- Serebral palsi'li çocuklarda plastik ayak ayakbileği ortezlerinin (PAFO) gövde pozisyonu üzerine etkisinin araştırılması
Investigation of the Effect of Plastic Ankle Orthoses (PAFO) on trunk position in children with Cerebral Palsy
YASİN YÜREKLİ
Yüksek Lisans
Türkçe
2021
Fizyoterapi ve RehabilitasyonHasan Kalyoncu ÜniversitesiFizyoterapi ve Rehabilitasyon Ana Bilim Dalı
PROF. DR. YAVUZ YAKUT