Geri Dön

Renk değişimi tabanlı nanobiyosensörlerin üretimi

Production of colorimetric nanobiosensors

  1. Tez No: 804219
  2. Yazar: ŞEYMA GÖNER
  3. Danışmanlar: DOÇ. DR. ŞÜKRÜ GÖKHAN ELÇİ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Biyoteknoloji, Biyomühendislik, Biotechnology, Bioengineering
  6. Anahtar Kelimeler: Gümüş nanopartiküller, Silver nanoparticles
  7. Yıl: 2023
  8. Dil: Türkçe
  9. Üniversite: Pamukkale Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Biyomedikal Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Günümüzde sanayi ve tarımsal faaliyetlerin hızla gelişmesiyle birlikte çevresel atıkların birikimi de artmaktadır. İnsan popülasyonundaki artış, çeşitli kimyasal ve ilaçların kullanımın artması çevrede ağır metal birikimine neden olmaktadır. Ağır metaller çevre ve canlı yaşamı üzerinde olumsuz etkilere sahiptir ve besin zinciri yoluyla insan vücudunda kolayca birikerek toksik etkilere neden olurlar. Su, hava, toprak ortamlarında birikerek canlı sistemini tehdit eden ağır metal iyonları arasında en önemli toksik etki cıvaya aittir. Hg2+ iyonu, suda çözünürlüğünün yüksek olması nedeniyle su kirliliğine neden olur. Deniz mahsulleri tüketimi ile insan vücudunda kolayca birikebilir ve insan sağlığını tehdit eder. Ağır metallerin toksik etkilerinden dolayı ekolojik ve biyolojik numunelerde tespit edilerek, seviyelerinin belirlenmesi önemlidir. Ağır metal tespiti geleneksel olarak cihaz tabanlı yöntemler ile gerçekleştirilmektedir. Bu yöntemler istenilen metali hassas ve seçici bir şekilde tespit edebilmektedir ancak bu yöntemlerin pahalı, portatif olmaması, zaman alıcı olmaları ve eğitimli personel gerektirmesi gibi sebepleri nedeniyle hızlı ve kolay yeni yöntemlere ihtiyaç doğmuştur. Biyosensörler çeşitli uygulamalarda kullanılan, analit tespitini ve hastalık durumlarının izlenmesini kolaylaştıran sistemlerdir. Bu nedenle, çoğu konuda olduğu gibi ağır metal tespiti için de popüler olan yeni bir tespit yöntemidir. Bu tez çalışmasındaki amacımız, cıva iyonlarını tespit edebilen bir nanosensör sistemi üretmektir. Gümüş ve altın nanoparçacıkların sahip oldukları geniş renk skalası, araştırmacıların kolorimetrik sensör üretmesine olanak sağlar. Gümüş ve altın nanoparçacık yüzeyleri sitrat, sistin ve sistein yüzey grupları ile modifiye edilerek ağır metallere tepkileri incelendi. Etkileşimden kaynaklanan renk değişimleri hem çıplak gözle hem de UV-Visible Spektrofotometre ile gözlemlendi. Bu sonuçlardan elde edilen kalibrasyon eğrisine göre test edilen konsantrasyonlarda nanoparçacığın doğrusal bir yanıt verdiği (y = 0,00005x + 0.01394, R² = 0,98249) gözlemlendi. LOD ve LOQ değerleri sırasıyla 14,4 nM ve 43,2 nM olarak hesaplandı. Nanosensör sistemi gerçek sistemler üzerinde test edildi ve elde edilen geri kazanım değerleri çeşme suyu için %106, göl suyu için %121,5, endüstriyel atık suyu için %112 ve deniz suyu için %98 olarak hesaplandı. Tüm sonuçlar sentezlenen CA-AgNP'nin Hg2+ iyonuna spesifik olarak yanıt verdiğini ve gerçek örneklerde Hg2+ iyonunu tespit edebileceğini göstermektedir.

Özet (Çeviri)

Nowadays, environmental waste accumulation increases with the rapid development of industrial and agricultural activities. The increase in the human population and the increase in the use of various chemicals and drugs cause heavy metal accumulation in the environment. Heavy metals have adverse effects on the environment and living life, and they accumulate easily in the human body through the food chain leading to toxic effects. Among the heavy metal ions that accumulate in water, air, and soil environments, mercury threatens the living system due to its high toxicity. Hg2+ ion causes water pollution due to their high solubility in water. The consumption of seafood leads to the accumulation of mercury, thus threatening human health. Due to the toxic effects of heavy metals, it is critical to determine their levels by detecting them from ecological and biological samples. The conventional methods for heavy metal detection are based on the use of instruments. These instrumental methods can analyze the desired metal sensitively and selectively, but these methods are expensive, not portable, time-consuming, and require trained personnel. For these reasons, a rapid and easy method is required for the analysis of these metals. Biosensors are systems used in various applications, facilitating analyte detection, and monitoring of disease states. Therefore, it is a popular new detection method for heavy metal detection, as in most subjects. Our aim in this thesis is to produce a nanosensor system to detect mercury ions. Silver and gold nanoparticles were investigated because of their special properties for the nanosensor system. The wide color scale of these particles allows researchers to produce colorimetric sensor systems. Silver and gold nanoparticle surfaces were modified with citrate, cystine, and cysteine surface groups, and their response to heavy metals was examined. Color changes resulting from the interaction were observed both with the naked eye and a UV-Visible Spectrophotometer. According to the calibration curve obtained from these results, a linear response of the nanoparticle was observed at the tested concentrations (y = 0.00005x + 0.01394, R² = 0.98249). LOD and LOQ values were found to be 14.4 nM and 43.2 nM, respectively. The nanosensor system was tested on real systems, and the recovery values obtained were 106% for tap water, 121.5% for lake water, 112% for industrial water, and 98% for seawater. All results showed that the synthesized CA-AgNP responds specifically to the Hg2+ ion and can detect the Hg2+ ion in real samples.

Benzer Tezler

  1. Yapısal renk değişimi tabanlı UV sensör tasarımı için makine ve derin öğrenme modellerinin karşılaştırılması

    Comparison of machine and deep learning models for structural color change-based UV sensor design

    EŞREF ERDOĞAN

    Doktora

    Türkçe

    Türkçe

    2025

    Elektrik ve Elektronik MühendisliğiErciyes Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖMER GALİP SARAÇOĞLU

  2. Beyazlatıcı diş macunlarının farklı rezin bazlı restoratif materyallerin aşınma, renk değişimi ve yüzey pürüzlülüğüne olan etkilerinin incelenmesi

    Evaluation of the effects of whitening toothpastes on wear, color change and surface roughness of various resin- based restorative materials

    DUYGU ERGEL

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2026

    Diş HekimliğiMersin Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ SEVİM ATILAN YAVUZ

  3. Akıllı telefon tabanlı kolorimetrik glikoz tayininde yapay zeka yaklaşımı

    Artificial intelligence approach for smartphone based colorimetric glucose detection

    ÖYKÜ BERFİN MERCAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Elektrik ve Elektronik Mühendisliğiİzmir Katip Çelebi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ VOLKAN KILIÇ

    DOÇ. DR. MUSTAFA ŞEN

  4. Protein tabanlı kağıt biyosensör ile hipoksantin tespitine yönelik optik sensör geliştirilmesi

    Development of an optical sensor for the detection of hypoxanthine using a protein-based paper biosensor

    GÖZDE GEZİCİ ÇAPAR

    Doktora

    Türkçe

    Türkçe

    2026

    BiyoteknolojiGaziantep Üniversitesi

    Biyoenformatik ve Bilişimsel Biyoloji Ana Bilim Dalı

    PROF. DR. TUĞBA TAŞKIN TOK

    PROF. DR. VOLKAN EYÜPOĞLU

  5. Farklı yüzey uygulamalarının bleach renk tonundaki rezin kompozitlerin renk stabilitesi, beyazlık indeksi ve yüzey pürüzlülüğü üzerindeki etkilerinin incelenmesi

    Investigation of the effects of different surface applications on color stability, whiteness index, and surface roughness of bleach-shade resin composites

    İLAYDA KUTLU

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2025

    Diş HekimliğiUşak Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. MUHAMMET FİDAN