Ceviz kabuğu katkılı manyetik biyokompozit kürelerin üretilmesi ve sulu çözeltilerden katyonik boyanın uzaklaştırılmasında kullanılması
Production of magnetic biocomposite beads incorporated with walnutshell and their use in removal of cationic dye from aqueous solutions
- Tez No: 810477
- Danışmanlar: DOÇ. DR. EROL ALVER
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Polimer Bilim ve Teknolojisi, Chemical Engineering, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Hitit Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 91
Özet
Dünyada kullanılabilir su kaynaklarının az olması nedeni ile suların verimli bir sekilde kullanımı büyük önem arz etmektedir. Bu nedenle birçok etken ile kirlenen suların tekrar kullanılabilir olması için farklı yöntemler üzerine araştırmalar yapılmaktadır. Bu çalışmada, toksik etkileri olduğu bilinen katyonik boya brilliant yeşilinin (BY) sulu çözeltilerden adsorpsiyon yöntemi ile uzaklaştırılması için çevre dostu bir manyetik (m) biyokompozit adsorban hazırlanmıştır. Manyetik biyokompozit kürelerin hazırlanmasında aljinat (AL), ksantan gam (KS) ve ceviz kabuğu tozu (C) kullanılmıştır. Boyayı sulardan etkili bir şekilde uzaklaştırmak için optimum manyetik biyokompozit küre hazırlama oranı %1,5AL/%0,5KS/%1C olarak belirlenmiştir. Sentezlenen manyetik biyokompozit küreler, FTIR, SEM ve TGA/DTG ile karakterize edilmiştir. FTIR ve SEM analizlerinde boyanın manyetik biyokompozit üzerine adsorbe olduğu, TGA/DTG analizinde ise bozunmanın üç aşamada gerçekleştiği belirlenmiştir. Sentezlenen manyetik biyokompozit kürelerin boyayı sudan uzaklaştırmasındaki etkili adsorpsiyon parametreleri optimize edilmiştir. Adsorpsiyon çalışmalarında optimum pH: 8, süre:120 dk. olarak belirlenmiştir. Sıcaklık adsorpsiyon etkinliğini artırırken, tuzun (NaCl) azalttığı tespit edilmiştir. Yapılan adorpsiyon çalışmalarında manyetik biyokompozitin maksimum adsorpsiyon kapasitesi 380±17,25 mg/g olarak bulunmuştur. Langmuir, Freundlich, Temkin ve Dubinin-Radushkevich adsorpsiyon izotermleri incelenmiş ve adsorpsiyonun Freundlich izoterm modeline daha yüksek doğruluk (R2 = 0,9983) ve düşük ortalama karekök hata (RSME = 9,29) ile uyduğu belirlenmiştir. Yapılan kinetik çalışmalarda sıcaklık ile adsorpsiyon kapasitesinin arttığı ve BY'nin manyetik biyokompozit kürelere adsorpsiyonunda sözde ikinci dereceden kinetik model ile partikül içi difüzyon prosesinin eş zamanlı işlediği sonucuna varılmıştır. Termodinamik hesaplamalar adsorpsiyonda fiziksel kuvvetlerin etkili olduğunu ve adsorpsiyon sürecinin endotermik olarak ilerlediğini göstermiştir (ΔH=79,90 kJ/mol). Ayrıca ΔG° 'nin negatif değerleri, adsorpsiyon sürecinin olabilirliğini ve kendiliğinden gerçekleştiğini göstermiştir.
Özet (Çeviri)
Due to the scarcity of usable water resources in the world, efficient use of water is of great importance. For this reason, researchers are carried out on different methods to make reusable the water polluted by many factors. In this study, an environmentally friendly magnetic (m) biocomposite adsorbent was prepared for the removal of cationic dye brilliant green (BY), which is known to have toxic effects, from aqueous solutions by adsorption method. Alginate (AL), xanthan gum (KS) and walnut shell powder (C) were used in the preparation of magnetic biocomposite beads. In order to effectively remove the dye from water, the optimum magnetic biocomposite bead preparation ratio was determined as 1.5%AL/0.5%KS/1%C. The synthesized magnetic biocomposite beads were characterized by FTIR, SEM and TGA/DTG. In the FTIR and SEM analyzes, it was determined that the dye was adsorbed on the magnetic biocomposite, while the degradation took place in three stages in the TGA/DTG analysis. The effective adsorption parameters of the synthesized magnetic biocomposite beads in removing the dye from the water were optimized. Optimum pH in adsorption studies: 8, duration: 120 min. has been determined. It was determined that while temperature increased the adsorption efficiency, salt (NaCl) decreased it. In the adsorption studies, the maximum adsorption capacity of the magnetic biocomposite was found to be 380±17,25 mg/g. Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption isotherms were investigated and it was determined that the adsorption fit the Freundlich isotherm model with higher accuracy (R2 = 0.9983) and low mean square error (RSME = 9,29). In the kinetic studies, it was concluded that the adsorption capacity increased with temperature and the pseudo second-order kinetic model and the intraparticle diffusion process operated simultaneously in the adsorption of BY to the magnetic biocomposite beads. Thermodynamic calculations showed that physical forces are effective in adsorption and the adsorption process proceeds endothermically (ΔH=79.90 kJ/mol). Also, the negative values of ΔG° indicated the possibility of the adsorption process and that it was spontaneous.
Benzer Tezler
- Tarımsal ve endüstriyel katı atıklardan manyetik katkılı ve katkısız biyoçar eldesi ve kullanım olanaklarının araştırılması
Investigation of magnetic additive and non additive biochars from agricultural and industrial solid waste and its usage opportunities
SEVDA ESMA DARAMA
Doktora
Türkçe
2022
Kimya MühendisliğiOndokuz Mayıs ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. SEMRA ÇORUH
- Beyaz midye kabuğu ve endüstriyel kenevir yağı kullanarak PVA kompozit üretimi
PVA composite production using white mussel shell and industrial hemp oil
BÜŞRA BİRATEŞ
Yüksek Lisans
Türkçe
2023
Metalurji MühendisliğiOndokuz Mayıs ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SİNEM ÇEVİK
- Kayısı çekirdeği ve kabuklu meyvelerin kompozit malzemelerde kullanımı
The use of apricot seeds and shell fruits in composite materials
HÜSEYİN TANER BAHÇE
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİnönü ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ŞEMSETTİN TEMİZ
- Ceviz kabuğu atığının mısır silajında katkı maddesi olarak kullanımı
Determination of the use of walnut shell waste as an additive in corn silage
OSMAN SANCAR
Yüksek Lisans
Türkçe
2024
Veteriner HekimliğiHarran ÜniversitesiHayvan Besleme ve Beslenme Hastalıkları Ana Bilim Dalı
DR. ÖĞR. ÜYESİ BESİME DOĞAN DAŞ
- Aljinat / doğal ve endüstriyel atık materyal katkılı kompozitlerle atıksulardan fenol giderimi
Phenol removal from wastewaters with alginate / natural and industrial waste material added composites
RASİM BERK AKYOL
Yüksek Lisans
Türkçe
2020
Çevre MühendisliğiOndokuz Mayıs ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. SEMRA ÇORUH