Hareketli ortamlar için sensör akış hücresi geliştirilmesi
Developing sensor flow cells for flowing environments
- Tez No: 816978
- Danışmanlar: PROF. DR. İBRAHİM IŞILDAK
- Tez Türü: Yüksek Lisans
- Konular: Bilim ve Teknoloji, Biyomühendislik, Science and Technology, Bioengineering
- Anahtar Kelimeler: Çip üstü laboratuvar, mikro akışkanlar, sensörler, kontrol teknolojisi, Lab-on-a chip, micro fluids, sensors, control technology
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Yıldız Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Biyomühendislik Ana Bilim Dalı
- Bilim Dalı: Biyomühendislik Bilim Dalı
- Sayfa Sayısı: 51
Özet
Mikroelektronik çipler için 1950 li yıllarda geliştirilen litografi tabanlı mikro teknolojinin icadından sonra, bu sistemlerin sıvı ve gaz akışında da kullanılabileceği fark edilmiştir. Mikro ölçek mertebesinde kullanılan yapılarla ilk mikro basınç sensörü 1966 yılında geliştirilmiştir. İlerleyen yıllarda mikro ölçekte yapıların daha da küçülmesi ile mems teknolojisi buna bağlı olarak çip üstü laboratuvar teknolojisi gelişme sağlamıştır. Mikro pompa, valf sistemleri, mikro elektronik ve mikro sensör yapıları sayesinde daha küçük daha gelişmiş cihazların geliştirilmesine olanak sağlamıştır. Geliştirilen bu yapılar belli bir plan doğrultusunda kullanıldığı zaman mikrolitre metrebesinde çalışan malzeme sarfiyatı düşük, hızlı ve güvenilir sonuçlar üretebilen tam veya yarı otomatik sistemleri meydana getirmiştir. Bu çalışmada, geleneksel çip-üstü-laboratuvar komponentlerinden modüler olarak pompa ve valf komponentlerinin geliştirilmesi sağlanmıştır. Değişik dipollere sahip moleküller üzerinde su, etil alkol, izopropil alkol, aseton gibi çözücülerin yapıya etkisi sıvı akşındaki etkileri incelenmiştir. Bunun yanında benzen, hexan, toluen gibi apolar çözücülerin malzeme üzerindeki etkileri incelenmiştir. Polar çözücülerdeki pH ve sıcaklık değerlerinin değişimi sonucu olası etkileri incelenip değerlendirilmiştir. Bunun sonucunda elde edilen parametreler ile tekniğin otomasyona uygunluğu kontrol edilmiştir.
Özet (Çeviri)
After the invention of lithography-based micro technology developed for microelectronic chips in the 1950s, it was realized that these systems could also be used in liquid and gas flow. The first micro pressure sensor was developed in 1966 with structures used on the micro scale. In the following years, with the shrinking of microscale structures, mems technology has improved accordingly, laboratory technology on chip. Thanks to the micro pump, valve systems, micro electronics and micro sensor structures, it has allowed the development of smaller and more advanced devices. When these developed structures are used in accordance with a certain plan, full or semi-automatic systems that operate in microliter meters with low material consumption and produce fast and reliable results have created. In this study, modular pump and valve components were developed from traditional onchip-laboratory components. The effects of solvents such as water, ethyl alcohol, isopropyl alcohol, acetone on the molecules with different dipoles on the structure and their effects on the liquid flow were investigated. In addition, the effects of apolar solvents such as benzene, hexane and toluene on the material were investigated. The possible effects of the changes in pH and temperature values in polar solvents were examined and evaluated. As a result, the compatibility of the technique with automation was checked with the parameters obtained.
Benzer Tezler
- Experimental and numerical investigation of momentum and heat transfer in open-cell metal foam subjected to oscillating flow
Salınımlı akış koşullarında açık hücreli metal köpükte akış ve ısı geçişinin deneysel ve sayısal olarak incelenmesi
ÖZER BAĞCI
Doktora
İngilizce
2015
Enerjiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. LEVENT ALİ KAVURMACIOĞLU
PROF. DR. NİHAD DUKHAN
- Bir insansız hava aracı gerçekleştirme ve hareketli nesnelerin tespit ve takibinde kullanımı
An unmanned aerial vehicle realization and its use in detecting and tracking moving objects
ELİF ECE ELMAS
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik MühendisliğiGazi ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ALKAN
- Mariot: an authoring framework for creating iot applications with mobile augmented reality
Marıot: mobil artırılmış gerçeklik ile nesnelerin interneti uygulamaları üretmek için bir yapılandırma çerçevesi
MERAL KUYUCU
Yüksek Lisans
İngilizce
2021
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÖKHAN İNCE
- İç ortamlar için yapay zeka tabanlı derinlik algılayan otonom araç geliştirilmesi
Development of an artificial intelligence based depth estimating autonomous vehicle for indoor environments
UTKU ULUSOY
Yüksek Lisans
Türkçe
2022
Elektrik ve Elektronik MühendisliğiGazi ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ AYŞE DEMİRHAN
- A distributed human identification system for indoor environments
Kapalı ortamlar için dağıtık mimarili insan tanıma sistemi
EMRE SERCAN ASLAN
Yüksek Lisans
İngilizce
2016
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. GÖKHAN İNCE