Geri Dön

Bütünüyle katı-hal kompozit potansiyometrik iyodür seçici elektrot ve potansiyometrik uygulamaları

All-solid-state composite potentiometric iodide selective electrode and its potentiometric applications

  1. Tez No: 819440
  2. Yazar: SEMRA YILMAZ
  3. Danışmanlar: PROF. DR. FATİH ÇOLDUR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Potansiyometrik tayin, Potentiometric determination
  7. Yıl: 2023
  8. Dil: Türkçe
  9. Üniversite: Erzincan Binali Yıldırım Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Nanobilim ve Nanoteknoloji Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu tez çalışmasında, iyodür iyonu tayini için potansiyometrik bir katı-hal kompozit iyon seçici elektrot (İSE) geliştirildi. Elektrotun yapısında sentezi gerçekleştirilen Cıva(II)-Salisilaldehit tiyosemikarbazon kompleksi (1:1) iyonofor madde olarak kullanıldı. Seçici kompozit tabakanın optimizasyonu için, sentezlenen madde kullanılarak grafit, çok duvarlı karbon nanotüp (MWCNT), plastikleştirici, iyonikleştirici ve ortam sağlayıcılar kullanılarak farklı kompozisyonlarda kompozit iyon seçici elektrotlar hazırlandı ve potansiyometrik performans özellikleri test edildi. En iyi potansiyometrik performans özelliklerini 10 mg civa(II)-salsilaldehit tiyosemikarbazon kompleksi, 26 mg dioktilftalat (DOP) plastikleştiricisi, 5 mg MWCNT, 4 mg metiltrioktilamonyum klorür (MTOA-Cl) ve 65 mg grafit bileşimine sahip elektrotun sergilediği belirlendi. Bu elektrotun doğrusal çalışma aralığı, 1.0×10-5-1.0×10-1 M; eğim değeri -55.2 mV/on katlık konsantrasyon değişimi; tayin sınırı, 9.0 × 10-6 M; pH çalışma aralığı, 4-8 ve cevap zamanı, ≈ 60 s olarak belirlendi. Elektrotun iyodür iyonlarına karşı oldukça tekrarlanabilir, kararlı ve seçici potansiyometrik cevap sergilediği görülmüştür. Elektrotun analitik uygulaması sentetik çözeltilerde iyodür iyonunun titrasyonunda indikatör elektrot olarak kullanımıyla ve guatr hastalığının tedavisinde kullanılan bir ilacın KI içeriğinin standart ekleme yöntemiyle belirlenmesinde kullanımı ile gerçekleştirildi.

Özet (Çeviri)

In this thesis, a potentiometric solid-state composite ion selective electrode (ISE) was developed for iodide ion determination. The synthesized mercury(II)-salcilaldehyde thiosemicarbazone complex (1:1) was employed as ionophore material in the electrode structure. For the optimization of the selective composite layer, composite ion selective electrodes with different compositions were prepared using the synthesized complex, graphite, multi-walled carbon nanotube (MWCNT), plasticizer, ionic addive and media providers, and their potentiometric performance characteristics were tested. It was determined that the electrode with the composition of 10 mg Mercury(II)-salcilaldehyde thiosemicarbazone complex, 26 mg dioctylphthalate (DOP) plasticizer, 5 mg MWCNT, 4 mg methyltrioctylammonium chloride (MTOA-Cl) and 65 mg graphite exhibited the best potentiometric performance properties. Linear operating range, slope value, detection limit, pH operating range and response time of the electrode were determined as 1.0×10-5-1.0×10-1 M, 55.2 mV/decade, 9.0 × 10-6 M, 4-8 , and ≈ 60 s, respectively. It has been observed that the electrode exhibits a highly reproducible, stable and selective potentiometric response to iodide ions. The analytical application of the electrode was carried out by using it as an indicator electrode in the titration of iodide ion in synthetic solutions and by using the standard addition method to determine the KI content of a drug used in the treatment of goiter.

Benzer Tezler

  1. Bütünüyle katı-hal kompozit bakır(II)–seçici potansiyometrik sensör

    All-solid-state composite copper(II)-selective potentiometric sensor

    GÜLHAN OĞUL

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    KimyaErzincan Binali Yıldırım Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. OSMAN ÇUBUK

  2. Bütünüyle katı-hal PVC membran ve kompozit Li+-seçici potansiyometrik sensörler ve uygulamaları

    All-solid-state PVC membrane and composite Li+-selective potentiometric sensors and their applications

    FATİH ÇOLDUR

    Yüksek Lisans

    Türkçe

    Türkçe

    2004

    KimyaOndokuz Mayıs Üniversitesi

    Kimya Ana Bilim Dalı

    Y.DOÇ.DR. MÜBERRA ANDAÇ

  3. Bütünüyle katı-hal PVC-membran ve kompozit nitrat-seçici potansiyometrik sensörler ve uygulamaları

    All solid-state PVC-membrane and composite Nitrate-selective potentiometric sensors and their applications

    HİLAL EREN

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    KimyaOndokuz Mayıs Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. MÜBERRA ANDAÇ

  4. Tiyoüre türevi Schiff bazı temelli bütünüyle katı-hal kompozit bakır(II)-seçici potansiyometrik sensör geliştirilmesi

    Development of an all solid-state composite copper(II)-selective potentiometric sensor based on a thiourea derivate Schiff base

    ÖZDEN YILDIRIM

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaErzincan Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. FATİH ÇOLDUR

  5. Tamamıyla katı-hal kompozit kalsiyum seçici elektrot ve potansiyometrik davranışı

    All solid-state composite calcium selective electrode and its potentionmetric performances

    NEZAKET SARIBOĞA

    Yüksek Lisans

    Türkçe

    Türkçe

    2004

    KimyaOndokuz Mayıs Üniversitesi

    Kimya Ana Bilim Dalı

    Y.DOÇ.DR. ADEM ASAN