Development of flexible sensors with conjugated polymers
Konjuge polimerlerle esnek sensörlerin geliştirilmesi
- Tez No: 826423
- Danışmanlar: DR. ÖĞR. ÜYESİ ERIC MENG MENG TAN
- Tez Türü: Yüksek Lisans
- Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: İngilizce
- Üniversite: Sabancı Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Üretim Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 52
Özet
Esnek elektrot tabanlı sensörler, esnek ve bükülebilir malzemeleri içeren özel bir algılama teknolojisidir. Geleneksel sert elektrotlardan farklı olarak, bu sensörler düzensiz yüzeylere uyum sağlamak veya esnek alt tabakalara entegre edilmek üzere tasarlanmıştır, bu da esneklik ve uyum sağlama gerektiren çeşitli uygulamalarda kullanılmalarını sağlar. Bu tez çalışması, konjuge polimerlerin iletken yüzeylerle entegrasyonuyla esnek sensörlerin geliştirilmesini amaçlamaktadır. Bu hedef doğrultusunda, açık devre potansiyeli ölçümleri yaparak farklı pH değerlerini değerlendirilen Polianilin (PANI) kaplamalı bir elektrokimyasal pH sensörü tasarlandı. İkinci sistem ise Polidiasetilen (PDA) ile kaplanmış aralıklı elektrot (IDE) tabanlı bir gaz sensörünü içermekteydi. Gaz sensörünün duyarlılığı, LCR metre kullanarak empedans değerlerindeki değişikliklerin izlenmesiyle değerlendirildi. Her iki sensör sistemi, E-ışını buharlaştırma yöntemi kullanılarak PET film üzerine gümüş (Ag) elektrotların oluşturulması ve ardından ilgili duyarlı algılama malzemelerinin damlatma yöntemiyle uygulanmasıyla üretildi. Sonuçlar, çeşitli pH değerlerini algılayabilen esnek PANI kaplamalı bir pH sensörünün başarılı bir şekilde gerçekleştirildiğini ve asetik asit karşısında duyarlılık gösteren PDA kaplamalı bir gaz sensörünün olduğunu göstermiştir. Bu bulgular, sağlık ve gıda gibi alanlar potansiyel uygulamalarda esnek sensör teknolojilerinin ilerlemesine katkıda bulunmaktadır.
Özet (Çeviri)
Flexible electrode-based sensors are a specific type of sensing technology that incorporates flexible and bendable materials as the sensing elements. Unlike conventional rigid electrodes, these sensors are designed to adapt to irregular surfaces or be integrated into flexible substrates, enabling their utilization in various applications where flexibility and conformability are essential. This thesis study aims to develop flexible sensors by integrating conjugated polymers with conductive surfaces. To pursue this objective, two distinct sensor systems were developed and investigated for their potential applications. Initially, an electrochemical pH sensor with a Polyaniline (PANI) coating was designed. The pH sensitivity of the sensor was evaluated by performing open-circuit potential measurements using a potentiostat. The second system involved an interdigitated electrode (IDE) based gas sensor coated with Polydiacetylene (PDA). The sensitivity of the gas sensor was assessed by monitoring the changes in impedance values using an LCR meter. Both sensor systems were fabricated by depositing patterned silver (Ag) electrodes onto PET film using the E-beam evaporation method, then applying the respective responsive sensing materials using the drop cast method. The results demonstrated the successful realization of a flexible PANI-coated pH sensor capable of detecting various pH values and a PDA-coated gas sensor exhibiting sensitivity towards acetic acid. These findings contribute to the advancement of flexible sensor technologies for health and food-related potential applications.
Benzer Tezler
- Fabrication and characterization of P3HT-WO3 hybrid thin films and device applications
P3HT-WO3 hibrit ince filmlerin üretimi, karakterizasyonu ve cihaz uygulamaları
FATMA BEYZA YEDİKARDEŞ ER
Doktora
İngilizce
2024
Kimyaİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. ESRA ZAYİM
PROF. DR. MUSTAFA ALTUN
- Ditiyeno[2,3-b;3',2'-d]Tiyofen ve Tiyeno[2,3-b]Tiyofen temelli organik elektronik ve optoelektronik malzemelerin sentezleri ve özelliklerinin incelenmesi
Preparation and investigation of the properties of electro and optoelectro active materials based on Dithieno[2,3-b;3',2'-d]Thiophene and Thieno[2,3-b]Thiophene
ŞULE TAŞKIRAN ÇANKAYA
- Model tabanlı adaptif LMS hüzmeleme tasarımı ve FPGAüzerinde gerçeklenmesi
Model-based design and FPGA implementation of adaptive LMS beamforming
EŞREF TEMEL
Yüksek Lisans
Türkçe
2022
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
DOÇ. DR. TUFAN COŞKUN KARALAR
- Frekans ve zaman-frekans uzaylarında music algoritması ile geliş açısı kestirimi
Angle of arrival estimation in frequency and time-frequency domains with music algorithm
OĞUZ TUNCAR
Yüksek Lisans
Türkçe
2023
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. SEDEF KENT PINAR