Uçucu kül ve yüksek fırın cürufu kullanılarak üretilen geopolimer betonlarının laboratuvarda açık ortamda bekletilmesi sonucu basınç dayanımı özelliklerinin incelenmesi
Examination of the compressive resistance properties of geopolymer concretes produced using fly ash and blast furnace slag as a result of storing them open in the laboratory
- Tez No: 833344
- Danışmanlar: PROF. DR. MEHMET ÇAKIROĞLU
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Toros Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: 53
Özet
Yapılan araştırmalara göre geopolimer beton (çimentosuz) genel olarak çimentosuz beton olarak bilinmektedir. Türkiye'de çimentoxüretimi, 2018 yılında yıllık 107,5 milyon ton çimentoiüretimi ve 68,5 milyon toniklinker ile dünyada beşinci, Avrupa'nınien büyük çimento üreticisi olarak bilinmektedir. Çimentonun ana bileşeni olan klinker yakılarak elde edilir. Yüksek sıcaklıkta (1400 C) kalsiyum, silikon alümina, demir oksit ve az miktarda çeşitli maddeler içeren hammaddelerdir. Çimento, tüm dünyada yaygın olarak kullanılan, iyi yapışma özelliklerine sahip bir bileşendir. Çimento üretimi son yıllarda dünya çapında %7 artış gösterirken, Türkiye'de %16.5 arttı. Çimento, inşaatxsektöründe günümüzde beton ve harç üretiminde en çok kullanılan bağlayıcıdır. Çimento endüstrisi, dünya çapındaki antropojenik karbondioksit emisyonlarının yaklaşık yüzde yedisinden sorumludur. Fosil yakıtların çimento üretiminde kullanılması ve herhangi bir çözüm yönteminin kullanılmaması durumunda genel olarak 1 ton klinkerin 1 ton CO2 emisyonu ürettiği kabul edilmektedir. Çimento üretiminde; insan sağlığını ve çevre kirliliğini olumsuz yönde etkileyen karbondioksit salınımının yüksek olması birçok çevreci topluluğun dikkatini çekmiştir. Dünyada yükselen çevre kirliliği, bilhassa Türk çimento fabrikalarının iç piyasanın tükettiğinden daha fazla çimento üretmesi ve yüksek CO2 emisyonları çevre bilincini artırmıştır. Bunun sonucunda birçok araştırmacı çimentonun alternatifi olabilecek atık malzemeleri kullanmaya ve atık malzemenin geri dönüşümüyle ilgili araştırmalar yapmaya başlamıştır. Puzolanik özellikteki artık malzemelerin (silisi dumanı, uçucuikül, yüksekifırın cürufu vb.) geri dönüştürülmesiyle elde edilebilecek araştırmalar sonucunda ortaya çıkan geopolimerxbetondur. Çimento üretiminin 1400-1500oC gibi yüksek sıcaklıklarda yapıldığı göz önünde bulundurulduğunda yüksek miktarda enerjinin tüketimi gerektirmektedir. Çimento üretim maliyetleri içerisinde enerjinin payı neredeyse % 70'dir. Bilhassa enerjisinin çoğunu ithal etmek zorunda kalan Türkiye, ayrıca çimento ihracatında da dünya sıralamasında yukarılardadır. Çimento üretiminde yerli kaynaklar kullanılmazken, ithal enerji kullanılması Türkiye'yi sadece aracı konumuna getirmektedir. Ayrıca çevre kirliliği ve karbondioksit emisyonları da dikkate alındığında yaşam kalitesi Türkiye'nin avantajlarından çok dezavantajlarına yol açmaktadır. Çimento kullanılmaksızın beton üretiminin artması ve geopolimer beton üretim ve kullanımının yükselmesi enerjiye olan ihtiyacı ortadan kaldırmak suretiyle enerji tasarrufuna önemli katkı sağlayacaktır. Jeopolimer beton araştırmalarında genellikle çimento ikame oranını azaltmak için araştırma yapılır. Puzolanik uçucuikül, yerikülü, silisidumanı vb. atık malzemeler kullanılarak çimento ikame oranı azaltılır. Bu yaklaşımın tüm dünyaya yayılması durumunda çimento üretiminin azalması beklenebilir. Yapılan birçok çalışma sonucunda puzolanik malzemelerin betona olumlu etkisinin olduğu ortaya çıkmıştır. Puzolanik malzemelerin betonun dayanıklılığını iyileştirdiği ve betonun hizmet ömrünü uzattığı bulunmuştur. Araştırmalar sonucunda, beton üretiminde puzolanik malzemelerin kullanılması, taze betondan daha iyi özelliklere ve dayanıklılığa sahip yüksek kaliteli beton oluşturmak için etkili bir teknik şeklinde görülmektedir (Hamalı, 2007). Böylece atık malzemelerin kullanılması, çevresel etkilerin azaltılması ve beton performansının artırılması mümkün olacaktır.
Özet (Çeviri)
According to the researches, geopolymer concrete (cementless) is generally known as cementless concrete. Cement production in Turkey is known as the fifth largest cement producer in the world and the largest in Europe, with an annual production of 107.5 million tons of cement and 68.5 million tons of clinker in 2018. Clinker, the main component of cement, is obtained by burning. They are raw materials containing calcium, silicon alumina, iron oxide and small amounts of various substances at high temperature (1400 C). Cement is a component with good adhesion properties, widely used all over the world. Cement production has increased by 7% worldwide in recent years, while in Turkey it increased by 16.5%. Cement is the most widely used binder in the construction industry today in the production of concrete and mortar. The cement industry is responsible for about seven percent of anthropogenic carbon dioxide emissions worldwide. It is generally accepted that 1 ton of clinker produces 1 ton of CO2 emissions if fossil fuels are used in cement production and no solution method is used. (Erdoğan, 2014). The high carbon dioxide emissions in cement production, which adversely affect human health and environmental pollution, have attracted the attention of many environmental communities. The rising environmental pollution in the world, especially the fact that Turkish cement factories produce more cement than the domestic market consumes and high CO2 emissions have increased environmental awareness. As a result, many researchers have started to use waste materials as an alternative to cement and to conduct research on waste material recycling. The geopolymer that emerged as a result of the researches that can be obtained by recycling residual materials with pozzolanic properties (silicidum, volatile particles, blast furnace slag, etc.) is x concrete. Considering that cement production is carried out at high temperatures such as 1400-1500oC, it requires the consumption of high amounts of energy. The share of energy in cement production costs is almost 70% Turkey, which has to import most of its energy, also ranks high in the world rankings in cement exports. While domestic resources are not used in cement production, the use of imported energy makes Turkey a mere middleman. Moreover, when environmental pollution and carbon dioxide emissions are taken into account, the quality of life is more of a disadvantage than an advantage for Turkey. Increasing the production of concrete without the use of cement and increasing the production and use of geopolymer concrete will make a significant contribution to energy saving by eliminating the need for energy. In geopolymer concrete research, research is usually conducted to reduce the cement substitution rate. The cement substitution rate is reduced by using waste materials such as pozzolanic volatile particles, groundmass, silicidumane, etc. If this approach spreads all over the world, cement production can be expected to decrease. As a result of many studies, it has been revealed that pozzolanic materials have a positive effect on concrete. It has been found that pozzolanic materials improve the durability of concrete and extend the service life of concrete. As a result of research, the use of pozzolanic materials in concrete production is seen as an effective technique to create high quality concrete with better properties and durability than fresh concrete (Hamalı, 2007). Thus, it will be possible to utilize waste materials, reduce environmental impacts and improve concrete performance.
Benzer Tezler
- Yüksek fırın cürufu kullanılarak üretilen geopolimer harçlarının basınç dayanımı özelliklerinin incelenmesi
Investigation for compressive strength properties of geopolymeric mortars produced by using blast furnace slag
BURÇİN KOÇAK
Yüksek Lisans
Türkçe
2023
İnşaat MühendisliğiKırklareli Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ KADİR KILINÇ
- Deniz suyunun farklı bağlayıcı miktarlarına sahip uçucu küllü ve yüksek fırın cüruflu geopolimer betonlara etkisi
The effect of sea water on fly ash and blast furnace slag based geopolymer concretes with different binder amounts
YUNUS EMRE OLCAY
Yüksek Lisans
Türkçe
2022
İnşaat Mühendisliğiİstanbul Gelişim Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ANIL NİŞ
- Yüksek sıcaklıktan sonra asit, sülfat ve tuz etkisine maruz kalan geopolimer betonların özelliklerinin araştırılması
Investigation of the properties of geopolymer concrete exposed to acid, sulphate and salt effect after high temperature
NİSA YAZICI
Yüksek Lisans
Türkçe
2022
İnşaat MühendisliğiAtatürk Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ FATMA KARAGÖL
- Endüstriyel yan ürünlerle üretilmiş geopolimer betonların mekanik ve durabilite özelliklerinin araştırılması
Investigation of mechanical and durability properties of geopolymer concretes produced with industrial by-products
SADIK YILDIZ
Doktora
Türkçe
2023
İnşaat MühendisliğiKocaeli Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. SALİH TANER YILDIRIM
- Yüzey iyileştirmesi uygulanmış geri dönüştürülmüş agregalı geopolimer betonların özellikleri
Properties of geopolymer concrete produced with surface-improved recycled concrete aggregates
MEMDUH NAS
Doktora
Türkçe
2023
İnşaat MühendisliğiKaradeniz Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ŞİRİN KURBETCİ