Effects of anisotropic transformation on the buffer layer of triso fuel particles
Başlık çevirisi mevcut değil.
- Tez No: 837188
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Yüksek Lisans
- Konular: Nükleer Mühendislik, Nuclear Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: İngilizce
- Üniversite: Hanyang University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 75
Özet
The buffer layer of the tristructural-isotropic (TRISO) nuclear fuel particles contributes to storing gaseous fission products. Any change in the layer's materials properties may affect the mechanical integrity of the fuel particles, especially at high burn-up conditions. Continued irradiation on the buffer layer is expected to cause anisotropic transformations of the initially isotropic buffer layer, and the following changes in mechanical properties may affect the particle durability. Yet, the effect of anisotropic transformation on the buffer layer's and eventually the particle's mechanical properties remain to be elucidated. Despite its porous structure, in the previous studies, the layer was generally considered as a low density yet non-porous pyrocarbon. We attempt to study the mechanical properties of the buffer layer by taking the porous structure into account, instead of defining the buffer layer as a nonporous layer with low density. In this research, we employed a fully coupled multiphysics model to analyze this problem. To model and analyze the coupled system of anisotropy-dependent mechanical properties such as thermal expansion and modulus of elasticity, we implemented the fuel performance code based on MOOSE. The effect of the transformation to the buffer layer were discussed considering several cases in depth.
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- Sol-jel yöntemi ile polimerik öncülerden nükleer kalite bor karbür tozların düşük sıcaklıkta üretimi ve radyasyon kalkanı olarak polimer nanokompozitlerde kullanımı
Production of nuclear grade boron carbide powders from polymeric precursors by sol-gel method and their utilization as radiation shield in polymer nanocomposites
SUNA AVCIOĞLU
Doktora
Türkçe
2020
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. FİGEN KAYA
- Scattering of plane electromagnetic waves at the junction formed by a pec half-plane and a half-plane with anisotropic conductivity
Mükemmel iletken bir yarım düzlem ile anizotropik iletkenliğe sahip bir yarım düzlem ekleminden düzlemsel elektromagnetik dalgaların saçılması
REŞİT ŞENDAĞ
Yüksek Lisans
İngilizce
1997
Elektrik ve Elektronik MühendisliğiÇukurova ÜniversitesiElektrik-Elektronik Ana Bilim Dalı
PROF. DR. A. HAMİT SERBEST
- Ortotropik derecelendirilmiş malzemelerin temas mekaniğinin analizi
Contact mechanics analysis of orthotropically graded materials
AYŞEGÜL KÜÇÜKSUCU
Doktora
Türkçe
2011
Makine MühendisliğiSelçuk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET AVCI
- Düşük boyutlu yapılarda polaron etkileri
Polaron effects in low dimensional structures
ABDURRAHMAN ÇETİN
Doktora
Türkçe
2003
Fizik ve Fizik MühendisliğiAnkara ÜniversitesiFizik Ana Bilim Dalı
DOÇ.DR. BEKİR SITKI KANDEMİR
- Alümina fiber takviyeli Al-si metal matriksli kompozitlerin üretimi ve mikroyapı-özellik ilişkilerinin incelenmesi
production of alumina fiber reinforced Al-si metal matrix composites and the investigation of their microstructure-propetry relation ships
HATEM AKBULUT