Betonarme yapıların perdeli, çelik ve kompozit olarak modellenmesi
Modeling of reinforced concrete structures as framed, steel and composite
- Tez No: 838968
- Danışmanlar: DR. ÖĞR. ÜYESİ KIVANÇ TAŞKIN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Eskişehir Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Yapı Bilim Dalı
- Sayfa Sayısı: 120
Özet
Türkiye' de yüksek katlı binalar incelendiğinde, betonarme yapılar ön plana çıksa da son yıllarda betonarme ve çelik malzemelerin bir arada kullanıldığı binalar da görülmektedir. Betonarme ve çeliğin malzeme özellikleri nedeniyle olumlu ve olumsuz etkileri bulunmaktadır. Bu iki malzeme birlikte kullanıldığında olumsuz etkiler azaltılabilir. Bu nedenle kompozit yapıların tasarımı ve hesabı ön plana çıkmaktadır. Ayrıca betonun basınç dayanımı ile çeliğin çekme dayanımı birlikte kullanılarak küçük kesitler elde etmek mümkündür. Bu çalışmada dört farklı kompozit kiriş tipinin Eurocode 4' e ve AISC360-16' ya göre tasarımı örneklerle açıklanmıştır. İlk örnekte kesme gecikmesi etkisindeki kesit, ikinci örnekte altıgen başlıklı kayma kaması bulunan kompozit kiriş, üçüncü örnekte mesnetlenmiş bir ikincil kompozit kiriş, dördüncü örnekte W(HEA) şekilli kiriş tasarımı ele alınmıştır.
Özet (Çeviri)
When high-rise buildings are examined in Turkey, although reinforced concrete structures come to the fore, there are also buildings where reinforced concrete and steel materials are used together in recent years. Reinforced concrete and steel have positive and negative effects due to their material properties. When these two materials are used together, negative effects can be reduced. For this reason, the design and calculation of composite structures come to the fore. In addition, it is possible to obtain small sections by using the compressive strength of concrete and the tensile strength of steel together. Thus, economic structures can be obtained by keeping the amount of other materials to be used and the floor thicknesses low. In this study, the design of four different composite beam types according to Eurocode 4 and AISC 360-16 is explained with examples. In the first example, the section under the effect of effective witdh, in the second example, arrangement of shear connectors in solid slab, in the third example a supported secondary composite beam and in the fourth example W-shaped(HEA) beam design is considered.
Benzer Tezler
- Betonarme perdeli ve çelik çerçeveli bir yapının DBYBHY 2007 yönetmeliğine göre tasarımı ve deprem etkileri bakımından IBC2006 yönetmeliği ile karşılaştırılması
Designing a steel moment frame building with reinforced concrete core according to DBYBHY 2007 and IBC2006 and compare the codes due to earthquake effects
ÖZGÜR KURUOĞLU
Yüksek Lisans
Türkçe
2009
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. KUTLU DARILMAZ
- Betonarme çekirdek perdeli ve çelik taşıyıcı sisteme sahip yüksek binaların zaman tanım alanında doğrusal olmayan analizi
Nonlinear dynamic time history analysis of high rise buildings with reinforced concrete shear wall and steel framing
YASİN MURAT HOTHOT
Yüksek Lisans
Türkçe
2018
Deprem MühendisliğiGebze Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. BÜLENT AKBAŞ
- Betonarme taşıyıcı sistemlerin tasarımında maliyet optimizasyonu için çelik sistemlerin kullanılması
The usage of steel structural systems to optimize the total cost of reinforced concrete structural systems
VEYSEL KONUK
Yüksek Lisans
Türkçe
2019
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. FETHİ KADIOĞLU
- Betonarme yapılarda perde yeri seçiminin yapısal davranış üzerine etkilerinin irdelenmesi
Scrutinising of shearwall location selection effect on the behavior of structural in reinforced concrete construction
BOTAN ENGİN GÜNEŞ
Yüksek Lisans
Türkçe
2017
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NECATİ MERT
- Betonarme binalarda 2 katta X çelik çaprazların ekonomik olma kriterlerinin belirlenmesi
Determination of economic criteria for 2-storey X-shaped buckling restrained brace in reinforced concrete structures
YAHYA MUSTEFA HASSAN
Yüksek Lisans
Türkçe
2024
İnşaat MühendisliğiAkdeniz Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. RAMAZAN ÖZÇELİK