Enerji dağıtım şebekeleri için adaptif aşırı akım röle koordinasyonu tasarımı
Adaptive overcurrent relay coordination design for energy distribution networks
- Tez No: 848672
- Danışmanlar: DR. ÖĞR. ÜYESİ CELAL FADIL KUMRU
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Adaptif koruma, Röle koordinasyonu, Güç sistemlerinde selektivite 2024, 68 sayfa, Adaptive protection, Relay coordination, Selectivity in power systems 2023, 68 pages
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Süleyman Demirel Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektrik Elektronik Mühendisliği Bilim Dalı
- Sayfa Sayısı: 79
Özet
Elektrik dağıtım sistemi içerisinde yer alan koruma rölelerinin temel işlevi, olası arızaları tespit ederek gerekli açma sinyallerini üretmektir. Bu sayede, herhangi bir arıza durumunda etkilenen bölge izole edilerek, sağlıklı bölgelerin enerji kesintisine uğraması önlenmeye çalışılır. Tüm bu görevlerin başarıyla yerine getirilmesi, dağıtım şebekesinin karmaşıklığını göz önünde bulunduran bir koruma röle koordinasyonu gerekliliğini ortaya koyar. Doğru bir röle koordinasyonu, sistem güvenilirliğini artırmakla birlikte, arıza kaynaklı kayıpları minimalize etmeye de yardımcı olur. Ancak, mevcut bir dağıtım şebekesindeki koruma rölelerinin parametreleri doğru bir şekilde ayarlanmış olsa bile, işletme sırasında beklenmeyen durumlar ortaya çıkabilir. Planlı veya planlanmamış konfigürasyon değişiklikleri, dağıtım sisteminde yapılan revizyonlar, yeni transformatörlerin veya jeneratörlerin eklenmesi, mevsimsel enerji taleplerindeki değişiklikler, rüzgar veya buz yüklerinin etkileri gibi bir dizi faktör, koruma rölelerinin yanlış çalışmasına neden olabilir. Elektrik dağıtım sistemlerinde adaptif koruma konsepti, literatürde çeşitli çalışmalarla ele alınmış ve güç sistemlerindeki belirsizlikler, arızalar ve değişikliklerin etkilerini minimize etmeyi amaçlamıştır. Bu çalışmalar, özellikle yapay zeka, makine öğrenimi ve bulanık mantık gibi gelişmiş yöntemleri kullanarak, değişken sistem koşullarına uyum sağlayabilen yeni koruma algoritmalarını geliştirmeyi hedeflemiştir. Bu bağlamda, genellikle IEEE 14 baralı güç sistemleri üzerinde yapılan bu çalışmaların çoğunda, gerçek saha verileri kullanımı sınırlıdır. Adaptif koruma ve röle koordinasyonu araştırmalarında, koruma röleleri ile diğer cihazlar arasında gerçek zamanlı veri alışverişi için farklı haberleşme protokolleri ve stratejileri üzerine de çalışılmıştır. Ancak, mevcut şebeke yapılarındaki geleneksel anomali durumları üzerine yeterli sayıda çalışma yapılmamıştır. Özellikle, ring yapılarındaki şebekelerin belirli bir noktadan açılarak iki paralel radyal fider şeklinde işletilmesi, adaptif koruma ve röle koordinasyonu için kritik durumları ortaya çıkarmaktadır. Ring yapılarındaki şebekelerde karşılaşılan bu anomali durumları, özellikle işletme personelinin hatalı manevralarından kaynaklanan endişelerle ilişkilidir. Radyal bir şebekenin işletilmesinin, ring şebekeye göre daha basit olması nedeniyle, ring şebekelerin belirli bir noktadan açılarak iki paralel fider şeklinde işletilmesi yaygın bir uygulamadır. Ancak, bu durumda güç akış yönü ve kısa devre empedansı ring şebekenin ayrıldığı noktaya bağlı olarak değişir. Bu durum, güç akış yönü ve şebekenin kısa devre empedansının değişmesiyle birlikte, koruma rölelerinin ayarlarının güncellenmesini ve sistem topolojisine göre yeniden hesaplamalar yapılmasını gerektirir. Bu çalışma, saha verileri kullanılarak yapılmış bir araştırmada, ring yapısındaki bir OG dağıtım şebekesinin farklı kaynaklardan beslenmesinin röle açma süreleri üzerindeki etkilerini incelemiştir. Şebeke, generatör ve şebeke+generatör durumları için yapılan arıza analizleri, her bir durum için röle açma sürelerini hesaplamıştır. Ayrıca, ring şebekenin belirli bir noktadan açılması durumunda röle açma sürelerinde meydana gelen değişim de incelenmiştir. Elde edilen sonuçlar, şebeke kaynağının değişmesi ve ring şebekenin belirli bir noktadan açılması durumlarında röle açma sürelerinde önemli değişimler olduğunu göstermektedir. Bu nedenle, güç sistemi kararlılığı açısından, herhangi bir kaynak veya bağlantı değişikliğinde röle koordinasyonunun ve parametre ayarlarının güncellenmesi gerekliliği vurgulanmıştır. Adaptif koruma sistemleri, sahip oldukları dinamik yapıları ile klasik koruma sistemlerine göre daha seçici ve güvenilir koruma sağlayarak, elektrik dağıtım sistemlerinde tercih edilmeye başlanmıştır.
Özet (Çeviri)
The fundamental task of protection relays in an electric distribution system is to detect faults and their types, and to generate the necessary tripping signal. The main objective is to isolate the faulty section from the rest of the system, preventing power loss in the unaffected areas. Achieving all these tasks emphasizes the importance of proper protection relay coordination that contributes to system reliability and reduces losses caused by faults. However, even if the parameters of the protection relays in an existing distribution network are set correctly, various factors such as operational changes, planned configuration modifications, restructuring of the distribution system, additions of Distributed Energy Resources (DERs) and generators to the system, fluctuations in energy demand during different seasons, and the impact of wind and ice loads can lead to situations of incorrect operation. To overcome such situations, numerous studies have been conducted in the literature on adaptive protection. These studies primarily aim to enhance the reliability, selectivity, and speed of protection actions in the presence of uncertainties, faults, and changes in the power system. For this purpose, new protection algorithms are being developed using methods such as artificial intelligence, machine learning, and fuzzy logic, which can adjust decision-making processes based on the changing conditions of the system. While these studies often use IEEE 14-bus power systems, there are limited studies that utilize real field data. Additionally, research has been carried out on various communication protocols and strategies for real-time data exchange between protection relays and other devices. In all these studies, one of the aspects that require examination concerning adaptive protection and relay coordination is the anomalies encountered in traditional distribution networks. One prominent anomaly is the operation of ring-shaped networks as two parallel radial feeders by opening them from a specific point. This situation is frequently encountered in locations where personnel are hesitant to make incorrect maneuvers in a ring network. In other words, a radial network is operated as two parallel feeders since it is partially simpler than a ring network. In such a scenario, the power flow direction and short-circuit impedance of the network will vary depending on the point where the ring network is opened. Therefore, recalculations of power flow direction and network short-circuit impedance are necessary based on the new network topology, which requires updating the relay settings. A similar situation can be encountered in a ring network during maintenance. When a ring network is opened for maintenance purposes, if a fault occurs in the system during that time, there may be issues with relay coordination since it was not designed for a ring network. This could lead to incorrect tripping or failure to timely trip the fault current. To prevent such situations, it is crucial to adapt the protection relays to the instant and changing structure of the system and enable them to detect and implement the necessary parameter changes in response to any modification in the system. Conventional protection systems may fall short in handling such scenarios, leading to a shift towards adaptive (change-responsive) protection systems. Adaptive protection systems can adjust the protection settings based on the state of the protected zone using multiple setting groups they possess. Thus, adaptive protection systems can adapt to different operating conditions, minimizing the possibility of incorrect operation compared to conventional protection systems. As a result, electric distribution companies and self-generating facilities are increasingly adopting adaptive protection systems instead of conventional ones due to their superior selectivity and reliability. In this specific study, the impact of power supply from different sources to a ring-structured distribution network was investigated using field data. Fault analyses were performed on all buses for three scenarios: grid supply, generator supply, and grid+generator supply. Tripping times were calculated for each scenario. Additionally, changes in relay tripping times when the ring network is opened from a certain point were examined. The results revealed significant changes in relay tripping times when the power source changes or when the ring network is opened from a specific point. Therefore, for every change in the power system, either in terms of the source or the connection, re-coordination of the relays and readjustment of the relay parameters based on the current situation become essential for power system stability.
Benzer Tezler
- Aktif dağıtım şebekelerini asimetrik arızalara karşı korumak için yeni bir tümleşik koruma sistemi tasarımı ve geliştirilmesi
Design and development of a novel integrated protection system to protect active distribution networks against asymmetrical faults
FATİH ÖZVEREN
Doktora
Türkçe
2024
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER USTA
- Çok kaynaklı mikroşebekelerde aşırı akım koruma rölesi performans analizi
Performance analysis of overcurrent protection relay in multi source microgrids
HABİP YILDIRIM
Yüksek Lisans
Türkçe
2024
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER USTA
- Dağıtık üretim tesisleri içeren şebekeler için akıllı ve adaptif bir koruma metodunun geliştirilmesi
Development of a smart and adaptive protection method for grids including distributed generation plants
YAVUZ ATEŞ
Doktora
Türkçe
2016
Elektrik ve Elektronik MühendisliğiYıldız Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET UZUNOĞLU
- Dağıtım şebekelerinde aşırı akım rölesi ile adaptif koruma
Adaptive protection using overcurrent relay in distribution grids
HAKAN VAR
Yüksek Lisans
Türkçe
2020
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. BELGİN TÜRKAY
- Multy-agent approach to adaptive protection of microgrid
Mikro şebeke korumasına malti-agent yaklaşımı
MATIN JAMALIYAN DARYANI
Yüksek Lisans
İngilizce
2017
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER USTA