Geri Dön

Cfd analysis of the aerodynamic effects of a gurney flap on a smallscale horizontal axis wind turbine with a low reynolds number

Başlık çevirisi mevcut değil.

  1. Tez No: 852562
  2. Yazar: ONUR MERT AKSOY
  3. Danışmanlar: DR. ELDAD AVİTAL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2020
  8. Dil: İngilizce
  9. Üniversite: Queen Mary University of London
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 37

Özet

CFD analysis was used to investigate and optimize the effect of a Gurney flap on a low Reynolds aerofoil, the Eppler E387, to improve the performance of small-scale wind turbines. 2D Unsteady RANS simulations were employed with ANSYS to investigate the affect of the Gurney flap. Validation process was successfully taken place on the E387 aerofoil without a Gurney Flap before investing the effect of Gurney Flaps with heights, in percentage of the aerofoil chord length, 1c%, 1.5c%, 2c% and 3c%. This lead to the discovery the lift was enhanced with increasing Gurney flap height due to the distinctive counter rotating vortices formed by the Gurney flap. However, at high AoA the drag penalties become more severe which leads to an earlier stall. Once flow fields of each Gurney flap height were analysed, the optimum CL/CD ratios of each Gurney flap setting was used to calculate the optimum tip speed ratio and the coefficient of power with single rotor calculations assuming linear aerodynamics.

Özet (Çeviri)

Özet çevirisi mevcut değil.

Benzer Tezler

  1. Yarı römorklarda yapısal eklenti tasarımları ve aerodinamik etkilerinin analizi

    Additional structural designs and analysis of aerodynamic effects in semi-trailer

    FAKI BİNBOĞA

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    Otomotiv MühendisliğiKocaeli Üniversitesi

    Otomotiv Mühendisliği Ana Bilim Dalı

    PROF. DR. ALİ ÇINAR

  2. Çit tasarımı ve gövde oluk yapılarının eksenel ve transonik bir türbinin aerodinamik performansına etkilerinin incelenmesi

    Investigation of the effects of squealer tip and groove casing treatment on the aerodynamic performance of an axial and transonic turbine

    DİDEM DENİZ KAYABAŞI

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Savunma Teknolojileri Ana Bilim Dalı

    DOÇ. DR. LEVENT ALİ KAVURMACIOĞLU

  3. Sürü halinde hareket eden döner kanatlı insansız hava araçlarının hesaplamalı akışkanlar dinamiği ile analizi

    Computational fluid dynamics analysis of rotary-wing unmanned aerial vehicles moving as a swarm

    BERKAY ÇETİN

    Doktora

    Türkçe

    Türkçe

    2025

    Havacılık ve Uzay MühendisliğiMarmara Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AHMET TALAT İNAN

  4. Static and dynamic aeroelastic analysis of a very light aircraft

    Çok hafif bir uçağın statik ve dinamik aeroelastik analizleri

    HALİME GÜL DEMİRER

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Havacılık MühendisliğiOrta Doğu Teknik Üniversitesi

    Havacılık ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. ALTAN KAYRAN

  5. Çapraz akışlı fan gömülü bir kanat konfigürasyonu aerodinamiğinin deneysel ve sayısal incelenmesi

    Experimental and numerical study of the aerodynamics of a cross flow fan embedded wing configuration

    CELALETTİN EKMEL COŞKUNSES

    Doktora

    Türkçe

    Türkçe

    2025

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. ONUR TUNÇER