Investigation of mix design parameters affecting the thermal properties of asphalt concrete under transient and steady-state heat transfer conditions
Geçici ve sürekli durum ısı transfer koşulları altında asfalt betonunun ısıl özelliklerini etkileyen karışım tasarım parametrelerinin incelenmesi
- Tez No: 854853
- Danışmanlar: PROF. DR. MURAT GÜLER, DOÇ. DR. HANDE IŞIK ÖZTÜRK
- Tez Türü: Doktora
- Konular: Ulaşım, Transportation
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Ulaştırma Mühendisliği Bilim Dalı
- Sayfa Sayısı: 219
Özet
Ölçüm yöntemlerinin güvenilirliği ve karışım bileşenlerinin ısıl özellikleri, asfalt betonunun ısıl özelliklerini belirlemede önemli bir rol üstlenir. Bu tezde, geçici ve kararlı durum ısı transfer koşulları altında asfalt betonunun ısıl özelliklerini etkileyen karışım tasarım parametrelerini incelemek üzere bir çalışma planı önerilmektedir. Çalışmada, Superpave yoğurmalı pres cihazı kullanılarak sıkıştırılan deney numuneleri, kararlı ve geçici ısı transfer koşulları altında yapılacak testler için uygun boyutlarda hazırlanmaktadır. Geçici ısı transfer koşulları altında ısıl iletkenlik, Geçici Düzlem Kaynak (TPS) cihazı ile ölçülmektedir. Laboratuvarda, numunelerin ısıl iletkenliğini ölçmek için kararlı durum test yöntemleri esas alınarak bir test düzeneği geliştirilirken numunelerin özgül ısı kapasitelerinin ölçümü için ise kalorimetri yaklaşımına dayalı ayrı bir test düzeneği kullanılmaktadır. TPS cihazı kullanılarak elde edilen sonuçlar, karışımın mikroyapısal özelliklerinin yanı sıra, karışım tasarım parametrelerinin de (agrega tipi, hava boşluğu içeriği ve maksimum agrega boyutu gibi) numunelerin ısıl iletkenliği üzerinde önemli bir rol oynadığını göstermektedir. Kalorimetri test düzeneğinde yapılan ölçümler, tüm karışım bileşenlerinin (agrega, bitüm ve hava boşluklarının) yanı sıra başlangıç koşullandırma sıcaklığının numunelerin özgül ısı kapasitesini etkilediğini ortaya koymaktadır. Kararlı durum koşullarında yapılan ısıl iletkenlik ölçümlerinde ise karışımın diğer özelliklerinin hemen hemen hiç etkisi görülmezken, agrega tipinin etkili bir faktör olduğu dikkat çekmektedir. Ölçülen ısıl özellikler dikkate alındığında, karışımların ısıl özellikleri üzerinde agrega tipinin en belirgin etkiye sahip karışım bileşeni olduğu anlaşılmaktadır.
Özet (Çeviri)
The reliability of the measurement methods and the thermal properties of the mix components play a crucial role in determining the thermal properties of asphalt concrete. In this thesis, a study plan is proposed to analyze the effect of mix design parameters on the thermal properties of asphalt concrete under both transient and steady-state heat transfer conditions. The laboratory samples are prepared using the Superpave Gyratory Compactor and cut into appropriate sizes for testing under steady-state and transient conditions. The measurement of thermal conductivity under transient conditions is conducted using a Transient Plane Source (TPS) device. While a steady-state test setup is developed in the laboratory to measure thermal conductivity, a separate calorimetry-based setup is used to measure the specific heat capacity of the samples. The results obtained with the TPS device show that not only the microstructural properties of the mixture but also the mix design parameters, i.e., the aggregate type, the air void content, and the maximum aggregate size, are important for the thermal conductivity of the samples. The measurements with the calorimetry-based setup show that all mixture components, i.e., aggregates, bitumen, and air voids, as well as the initial conditioning temperature, influence the specific heat capacity of the samples. Under steady-state conditions, only the aggregate type appears to be an influential factor, while the other properties of the mixture are all insignificant. Given the measured thermal properties, it appears that the aggregate type is by far the most influential mixture component affecting the thermal properties of the mixtures.
Benzer Tezler
- Investigation of the cutting performances of the diamond tools used in the natural stone industry
Doğal taş sanayisinde kullanılan elmaslı kesicilerin kesim performansının incelenmesi
BERRAK BULUT
Doktora
İngilizce
2021
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- Sathi kaplamaların performansına etki eden parametrelerin incelenmesi ve performans modeli geliştirilmesi
Determination of parameters affecting seal coat performance and development a performance model
CAHİT GÜRER
Doktora
Türkçe
2010
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KARAŞAHİN
- Hazır beton üretiminde kaliteyi etkileyen parametrelerin SPSS yöntemiyle incelenmesi
Investigation of quality parameters affecting with SPSS in the production of ready mix concrete
BURHAN CEMAL GÖNEN
Yüksek Lisans
Türkçe
2012
Maden Mühendisliği ve MadencilikNiğde ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MAHMUT SUAT DELİBALTA
- Potasyum humat ilaveli laboratuvar ortamında hazırlanan akışkanlaştırıcı kimyasal katkılar ile üretilen harçların mekanik ve durabilite özelliklerinin incelenmesi
Investigation of mechanical and durability properties of mortars produced with chemical admixtures added potassium humate prepared in laboratory conditions
ENGİN SÜRÜCÜ
Yüksek Lisans
Türkçe
2018
İnşaat MühendisliğiKırklareli Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ KADİR KILINÇ
- Bitümlü sıcak karışımların deformasyon direncinin üç eksenli kayma mukavemeti deneyi ile incelenmesi
Investigation of deformation resistance of hot-mixed asphalt mixtures by triaxial shear strength test
ALTAN ÇETİN
Doktora
Türkçe
2008
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. EMİNE AĞAR