Geri Dön

Kolemanit ve polipropilen lif katkısının harçlara etkisi

The effect of colemanite and polypropylene fiber addition on concrete mortars

  1. Tez No: 856876
  2. Yazar: BEYZA ŞİMŞEK
  3. Danışmanlar: DR. ÖĞR. ÜYESİ FURKAN ŞAHİN
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2023
  8. Dil: Türkçe
  9. Üniversite: İSTANBUL NİŞANTAŞI ÜNİVERSİTESİ
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: 81

Özet

Her geçen gün artan beton tüketimiyle beraber, çimento ihtiyacı da artmaktadır. Çimentonun üretim aşamalarında açığa çıkan CO2 ve olumsuz etkilerinden dolayı alternatif malzeme arayışına gidilmektedir. Türkiye Dünya bor rezervinin %73 'ünü barındırması nedeniyle çimento miktarından azaltılarak bor türevi olan kolemanit üzerine çalışmalar yapılmaktadır. Aynı zamanda betonun mevcut olumsuz özelliklerini iyileştirmek ve yapısına sünek davranış kazandırabilmek için Polipropilen Lif katkısı üzerine çalışmalar yapılmıştır. Bu çalışmada da harçlar üretilirken, fiziksel ve kimyasal özelliklerini iyileştirebilmesi amacıyla polipropilen lif ve kolemanit kullanılmıştır. Kullanılan malzemeler belirli oranlarda harçlara eklenmiş ve çeşitli deneyler ile en iyi performansı gösteren harç araştırılmıştır. Deneyler %5, %10 kolemanit, %0,4, %1,2 oranlarında polipropilen lif ile üretilen harçlar üzerinde gerçekleştirilmiştir. Üretilen harçlar karışım oranlarına göre SH, K5, K10, K5/0.4L, K5/1.2L, K10/0.4L ve K10/1.2L şeklinde kodlanmıştır. Her bir deney için 1 set numune dizini üretilmiştir. Numuneler üzerinde yayılma, ultrases, kılcallık, su emme, yüksek sıcaklık, ıslanma-kuruma, basınç ve eğilme deneyleri gerçekleştirilmiştir. Sonuçlar referans numuneye göre değerlendirildiğinde en düşük basınç dayanımını 33,15 MPa ile K10/1.2L numunesi gösterirken, en yüksek basınç dayanımını 46,96 MPa ile K5/0.4L numunesi göstermiştir.

Özet (Çeviri)

With the increasing consumption of concrete every day, the demand for cement is also on the rise. Due to the CO2 emissions and negative effects arising from the production stages of cement, there is a search for alternative materials. In Turkey, where it holds 73% of the world's boron reserves, studies are being conducted to reduce the amount of cement by utilizing colemanite, a boron derivative. Simultaneously, efforts have been made to improve the existing negative properties of concrete and impart ductile behavior to its structure through the addition of Polypropylene Fiber. In this study, polypropylene fiber and colemanite were used in the production of mortars to enhance their physical and chemical properties. The materials used were added to the mortars in specific proportions, and various experiments were conducted to investigate the mortar that exhibited the best performance. Experiments were conducted on mortars produced with 5% and 10% colemanite and 0,4% and 1,2% polypropylene fiber. The produced mortars were coded as SH, K5, K10, K5/0.4L, K5/1.2L, K10/0.4L, and K10/1.2L according to the mixing ratios. A set of samples was produced for each experiment. Spread, ultrasonic, capillarity, water absorption, high temperature, wetting-drying, compression, and flexural tests were performed on the samples. When the results were evaluated based on the reference sample, the mortar K10/1.2L showed the lowest compressive strength at 33,15 MPa, while the mortar K5/0.4L showed the highest compressive strength at 46,96 MPa.

Benzer Tezler

  1. Kolemanit atığı ve silis dumanı katkılı metakaolin tabanlı geopolimer harcın mekanik ve durabilite özelliklerinin incelenmesi

    Investigation of colemanite waste and silica fume on the mechanical and durability properties of metakaolin based geopolymer mortar

    YURDAKUL AYGÖRMEZ

    Doktora

    Türkçe

    Türkçe

    2018

    İnşaat MühendisliğiYıldız Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ORHAN CANPOLAT

  2. Çinko borat ve kolemanit katkılı polipropilen kompozitlerin üretimi ve karakterizasyonu

    The production and characterization of polypropylene compozites fi̇lled by colemanite and zinc borate

    ADEM ÇANKAYA

    Doktora

    Türkçe

    Türkçe

    2014

    Teknik EğitimGazi Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    DOÇ. DR. ABDULKADİR GÜLLÜ

    DOÇ. DR. ABDULMECİT GÜLDAŞ

  3. Polipropilen talk/kolemanit hibrit kompozit malzemelerin ısıl özelliklerinin deneysel tasarım yöntemi ile eniyilenmesi / yapay sinir ağı ile kestirimi

    Optimization of thermal properties of polypropylene talc / colemanite hybrid composite materials by experimental design method / estimation with artificial neural networks

    BAŞAK YÜKSEK

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Makine MühendisliğiKocaeli Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ŞENOL ŞAHİN

  4. Mikropartikül taneli kolemanit bor maddesinin polipropilen malzemesinin termal özelliklerine etkisi

    Effect of colemanite bor material to polypropylene materials thermal properties

    ECE YÜCEL

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Makine MühendisliğiKocaeli Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. TÜLİN REYHANOĞLU ŞAHİN

  5. Investigation of mechanical, physical and flame retardant properties of polypropylene compounds using synergisticcombination of minerals and intumescent flame retardants

    Polipropilen bileşiklerinin mekanik, fiziksel ve alev geciktiriciözelliklerinin mineraller ve köpüren alev geciktiricilerinsinerjistik kombinasyonunun kullanılarak incelenmesi

    MERVE KAHRAMAN

    Doktora

    İngilizce

    İngilizce

    2022

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. NİLGÜN KIZILCAN