Geri Dön

Design and implementation of a sampling system for solid flow on conveyor belts in industry

Endüstride konveyör bantlar üzerindeki katı akışına yönelik bir örnekleme sısteminin tasarımı ve uygulanması

  1. Tez No: 863400
  2. Yazar: BARIŞ SEZER
  3. Danışmanlar: DR. ÖĞR. ÜYESİ HAKAN KALKAN, DR. ÖĞR. ÜYESİ BEHZAT BAHADIR KENTEL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2024
  8. Dil: İngilizce
  9. Üniversite: Atılım Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Makine Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: 96

Özet

Endüstriyel üretim tesislerinde, üretilen malzemenin kalitesinin belirlenmesi çok büyük bir önem taşır. Malzemenin içeriğini ve kalitesini incelemek için yapılan iki tür yöntem vardır. Bu yöntemler fiziksel ve kimyasal analizlerdir. Tesislerin bu kalite kontrollerinin yapılabilmesi için bir takım test analiz laboratuvarları vardır. Bu laboratuvarlarda, üretilen her bir ürün için ham halinden başlayarak belirli aşamalarda numuneler alınır ve sonra testler ve analizler yapılır. Yapılan bu testler sırasında malzemenin içeriği ve kalitesi gözlemlenir. Test ve analizler sonucunda çıkarılan veriler tesislerin üretim kalitelerini arttırmalarına, üretim maliyetlerini düşürmelerine, enerji maliyetlerini düşürmelerine, doğru ürün üretimine katkıda bulunurlar ve böylece firmaların güvenilirliklerinin artmasını sağlarlar. Bu hususların gerçekleştirilebilmesi için üretim esnasında gerekli görülen her aşamada malzemeyi fiziksel ve kimyasal olarak tam temsil edebilecek şekilde numune alınmalıdır. Endüstride birçok türde numune alma teknikleri uygulanmaktadır. Bu aşamada, doğru numune alma noktasına, doğru tekniği uygulamak alınan numunenin tüm ürünü temsil etmesi açısından son derecede önemlidir. Bu çalışmada, gözlemler, teorik çalışmalar ve hesaplamalar sonrasında bir prototip üretilmiştir. Üretilmiş olan bu prototip üzerinde birçok test yapılmış ve yapılan bu testler sonrasında, kullanılması gereken parametreler kararlaştırılmıştır. Bu yeni numune alma makinesi ile çok daha iyi performansta çalışan, en az seviyede bakım isteyecek, alınan numunenin tüm ürünü tam temsil edebileceği bir numune alma sistemine ulaşılması hedeflenmiştir.

Özet (Çeviri)

In industrial production facilities, determining the quality of the produced material is of great importance. There are two types of methods to examine the content and quality of the material. These methods are physical and chemical analyses. The facilities have test analysis laboratories to perform these quality control processes. In these laboratories, starting from the raw state of each product,, samples are taken and then, tested and analyzed at certain stages. During these tests, the content and quality of the material are observed. The results of these tests and analyses contribute to the increasing of the production quality, to the reduction of production costs and energy costs, to the production of the desired products and therefore help increasing the reliability of companies. In order to achieve this, at each stage of the production phase, samples must be taken in such a way that can fully represent the material physically and chemically. There are many types of sampling techniques available in the industry. At this stage, applying the correct technique to the correct sampling point is extremely important to ensure that the sample taken represents the entire product. In this study, a prototype was produced after observations, theoretical studies and engineering calculations. Many tests were carried out on this prototype and after these tests, the parameters to be used were decided. With this new sampling machine, it is aimed to achieve a sampling system that works with a better performance, requires minimal maintenance whilst the sample taken can fully represent the entire product.

Benzer Tezler

  1. Madencilikte bilgisayar uygulamaları ve SURPAC 2000 yazılımı ile bir saha çalışması

    Başlık çevirisi yok

    TANER ERDOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Maden Mühendisliği ve Madencilikİstanbul Teknik Üniversitesi

    Kazı Mekanizasyonu Bilim Dalı

    YRD. DOÇ. DR. HASAN ERGİN

  2. Anaerobic membrane bioreactors for cost-effective municipal water reuse

    Evsel atıksuların anaerobik membran biyoreaktörler ile maliyet etkin olarak yeniden kullanımı

    HALE ÖZGÜN

    Doktora

    İngilizce

    İngilizce

    2015

    Çevre Mühendisliğiİstanbul Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    PROF. DR. CUMALİ KINACI

    PROF. DR. JULES B. VAN LIER

  3. Kazıkların eksenel ve yatay yük taşıma kapasiteleri

    The bearing capacity of piles under axial and lateral loading

    NİLAY DURLANIK

    Yüksek Lisans

    Türkçe

    Türkçe

    1995

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    PROF. DR. AHMET SAĞLAMER

  4. Türkiye'de öğretmen yetiştirme sisteminin geleceğine yönelik eğitim yönetimi akademisyenlerinin görüşleri

    Opinions of educational administration academicians on the future of the teacher training system in Turkey

    KENAN IŞIK

    Doktora

    Türkçe

    Türkçe

    2019

    Eğitim ve ÖğretimGazi Üniversitesi

    Eğitim Bilimleri Ana Bilim Dalı

    PROF. DR. FERUDUN SEZGİN

  5. Süne ve kımıl zararlılarının ses işleme yöntemleri ile sınıflandırılması ve bir gömülü sistem gerçeklemesi

    Classification of sunn pests using sound processing methods and an embedded system realization

    BİLGİ GÖRKEM YAZGAÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MÜRVET KIRCI