Betonarme okul binasının malzeme sınıfının değişiminin binanın performansına etkisinin incelenmesi
The change of the material class of the reinforced concrete school building examining its effect on performance
- Tez No: 863834
- Danışmanlar: DR. ÖĞR. ÜYESİ TUNCAY KAP
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Düzce Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 258
Özet
Bu çalışmada, betonarme kamu binasının performans düzeyi elastik olmayan değerlendirme yöntemi olan tek modlu statik itme analizi ile belirlenmiştir. ETABS Ultimate V.20.1.0 sonlu elemanlar programında binaya ait taşıyıcı sistem kesit bilgileri girilmiş altı adet beton sınıfı ve iki adet donatı sınıfı ile performans analiz yapılmıştır. Altı adet malzeme özelliklerine göre yapılan itme analizi sonucu yapının TBDY 2018'de istenen performans seviyesi şartlarını sağlayıp sağlamadığı incelenmiştir. SAP 2000 programı Material ayarlarından malzeme bilgileri tanımlanış, Frame Section özelliklerinden kolon, kiriş elemanları tanımlanmıştır.“Section Desinger”ayarlarından kesitlerin moment eğrilik analizleri elde edilmiş ve hinge ayarlarından kesitlerin plastik mafsal atamaları yapılmıştır. Taşıyıcı sistem elemanları etkin kesit rijitlikleri TBDY 2018 Bölüm 15'e göre tanımlanmıştır. Altı adet malzeme özelliklerine göre statik itme analizleri yapılmış ve malzeme değişiminde yapının performansının değişimi incelenmiştir. Program analizi sonucu yapının statik iki eksenli kesme kuvveti ve yapının deplasman değerleri veren statik itme eğrileri modal kapasite eğrilerine dönüşümü sağlanarak eksenleri spektral ivme ve spektral deplasman değerini veren eğrilere dönüştürülmüştür. Altı adet malzeme sınıfına göre yapı DD1 deprem düzeylerinde yapı performans noktasına ulaşıp ulaşmadığı incelenmiş Yapı performansları karşılaştırılmıştır.
Özet (Çeviri)
In this study, the performance level of the reinforced concrete public building was determined by single-mode static pushover analysis, which is an inelastic evaluation method. In the ETABS Ultimate V.20.1.0 finite element program, the structural system section information of the building was entered and performance analysis was carried out with six concrete classes and two reinforcement classes. As a result of the pushover analysis performed according to six material properties, it was examined whether the structure met the required performance level conditions in TBDY 2018. Material information was defined in the SAP 2000 program Material settings, and column and beam elements were defined from the Frame Section properties. Moment curvature analyzes of the sections were obtained from the“Section Designer”settings and plastic hinge assignments of the sections were made from the hinge settings. Effective section stiffnesses of carrier system elements are defined according to TBDY 2018 Chapter 15. Static pushover analyzes were carried out according to six material properties and the change in the performance of the structure with material change was examined. As a result of the program analysis, the static push curves, which give the static biaxial shear force of the structure and the displacement values of the structure, were transformed into modal capacity curves and their axes were transformed into curves giving the spectral acceleration and spectral displacement values. It was examined whether the building reached the building performance point at DD1 earthquake levels according to six material classes and the building performances were compared.
Benzer Tezler
- Mevcut betonarme okul binalarında güçlendirme perdelerinin etkinliğinin doğrusal olmayan dinamik analiz ile irdelenmesi
Investigation of the rc infill wall effectiveness in the rehabilitation of existing rc school buildings employing nonlinear dynamic analyses
ORKUN GÖRGÜLÜ
Doktora
Türkçe
2015
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. BEYZA TAŞKIN AKGÜL
- Mevcut betonarme binaların depreme karşı dayanımının değerlendirilmesi
Evaluation of the seismic resistance of an existing reinforced concrete building
ABDULLAH DİLSİZ
Yüksek Lisans
Türkçe
2004
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF.DR. ZEKAİ CELEP
- Simulation of a collapsed reinforced concrete school building after 2011 Van earthquakes
2011 Van depremlerinde hasar gören bir betonarme okul binasının simülasyonu
MENEKŞE CANATAN
Yüksek Lisans
İngilizce
2018
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiDeprem Mühendisliği Ana Bilim Dalı
PROF. DR. AYFER ERKEN
- Bir okul binasının tasarımı ve deprem performansının belirlenmesi
The design of a school building and determination of seismic performance of school building
ALPEREN TÜRKAY
Yüksek Lisans
Türkçe
2013
Deprem Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. KADİR GÜLER
- Rehabilitation and strengthening of a reinforced concrete building by using different approaches
Betonarme bir binanın farklı yöntemler ile onarım ve güçlendirilmesi
FARNAZ ALINOORI
Yüksek Lisans
İngilizce
2013
Deprem Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. KADİR GÜLER