Baskı devre ısı değiştiricileri için farklı tip yüzey geometrilerinin ısıl performansının incelenmesi
Investigation of the thermal performance of different types of surface geometries in printed circuit heat exchangers
- Tez No: 865682
- Danışmanlar: PROF. DR. ÖNDER KAŞKA
- Tez Türü: Doktora
- Konular: Enerji, Energy
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Osmaniye Korkut Ata Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 126
Özet
Bu çalışmada, uçak kanadı kanatçıklı ve sinüsoidal kanatçıklı baskı devre ısı değiştiricilerin ısıl ve hidrolik çözümlemeleri yapılmıştır. Uçak kanadı kanatçıklı 2 model ve sinüsoidal kanatçıklı 8 model çalışılmıştır. Modellerin farklı Reynolds sayılarında (Re=1000, Re=2000, Re=3000 ve Re=4000) basınç düşümleri, sürtünme faktörleri, Nusselt sayıları ve performans değerlendirme kriterleri incelenmiştir. Reynolds sayısının artması performans değerlendirme kriterini düşürmektedir. Performans değerlendirmesi yapılan 0 derece-0 derece uçak kanatçıklı model referans alınmıştır. Buna göre, sinüsoidal kanatçıklı model (Model VIII) için Reynolds 1000 için performans değerlendirme kriteri 1,07 iken, uçak kanadı kanatçıklı (15 derece- 15 derece) için ise aynı Reynolds sayısında performans değerlendirme kriteri 1,187'dir. Dolayısıyla en verimli model 15 derece- 15 derece uçak kanadı kanatçıklı modeldir
Özet (Çeviri)
In this study, thermal and hydraulic analysis of airfoil fin and sinusoidal fin printed circuit heat exchangers were performed. 2 models with airfoil fin and 8 models with sinusoidal fin were studied. Pressure drop, friction factor, Nusselt number and performance evaluation criteria of the models at different Reynolds numbers (Re=1000, Re=2000, Re=3000 and Re=4000) were examined. Increasing Reynolds number reduces the performance evaluation criteria. The 0 degree-0 degree airfoil fin model for which performance evaluation was made was taken as reference. Accordingly, while the performance evaluation criterion for Reynolds 1000 is 1.07 for the model with sinusoidal fin (model VIII), the performance evaluation criterion for the same Reynolds number for the airfoil fin model (15 degrees- 15 degrees) is 1.187. Therefore, the most efficient model is the model with 15 degrees- 15 degrees airfoil fin.
Benzer Tezler
- 316L paslanmaz çeliğinin mikrobiyolojik korozyon davranışına Ag-Cu iyonlarının etkisi
The effect of Ag-Cu ions on microbiological corrosion behavior of 316L stainless steel
SİMGE ARKAN
Yüksek Lisans
Türkçe
2015
Biyolojiİstanbul ÜniversitesiTemel ve Endüstriyel Mikrobiyoloji Ana Bilim Dalı
DOÇ. DR. ESRA İLHAN SUNGUR
- Elektronik cihazlarda termoelektrik soğutucu ve ısı borusu soğutma performansının sayısal olarak incelenmesi
Numerical analysis of thermoelectric cooler and heat pipe cooling performance in electronic devices
GÖKHAN ÇELİK
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ABUZER ÖZSUNAR
- Lehim/mikro topçuk teknolojileri için mikroelektronik test yapılarından daisy chain test yapısı
The daisy chain structure, a microelectronic test structure for solder/micro ball technology
AHMET ŞAMİL ÇELİK
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik MühendisliğiNecmettin Erbakan ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. MEHMET AKİF ERİŞMİŞ
- 5-function stop lamp thermal analysis
5 fonksiyonlu stop lambası termal analizi
CAN DAŞDEMİR
Yüksek Lisans
İngilizce
2022
Makine MühendisliğiAltınbaş ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ İBRAHİM KOÇ
- Yüksek güç tüketen elektronik bileşenlerin doğrudan hava akışı ile soğutulmasına kanatçık geometri etkisinin incelenmesi
Investigation of the effect of fin geometry on the cooling of high power consuming electronic components by air flow through
YUSUF TEKİN
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MUHİTTİN BİLGİLİ