Geri Dön

Comparison of reference signal received power measurements between cell phone and scanning receiver in LTE

LTE'de cep telefonu ve tarama alıcısı ile referans alınan güç sinyal ölçümlerinin karşılaştrılması

  1. Tez No: 867444
  2. Yazar: ŞAHİN GÜLLÜ
  3. Danışmanlar: DOÇ. DR. JOSKO ZEC
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2017
  8. Dil: İngilizce
  9. Üniversite: Florida Institute of Technology
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 72

Özet

Mobil teknolojilerde, müşterilere hizmet verilmeden önce ağ kapsama tahmini, ağ optimizasyonu ve ağ bakımı belirli bir alanda toplanan RSRP (Referans Alınan Güç Sinyal) ölçümlerine dayanır. Bu ölçüm toplama, Radyo Frekansı (RF) mühendisleri için,“sürüş test veya sürüş testi”olarak adlandırılan pratikte çok yaygın olan deneydir. Bu ölçümler genellikle profesyonel bir alıcı veya uygun yazılım ve lisansa sahip bir profesyonel telefon tarafından kaydedilir. Bu tezde kullanılan PCTEL SeeGull EX tarama alıcısı RF mühendislerinin veri toplaması için kullanılan profesyonel bir araçtır. Ayrıca, bu deney için, Florida Institue of Technology üniversitesinde bulunan bir doktora öğrencisi tarafından oluşturulmuş uygun bir uygulamaya sahip HTC One M7 cep telefonu kullanılmıştır. Belirlenen kapsama alanı ile müşterilerin deneyimlediği kapsama alanı arasında farklılıklar olabilir. Bu nedenle bu tezin amacı, müşteri deneyimi açısından tarama alıcısı ile cep telefonu arasında önemli bir fark olduğunu göstermektir. RSRP ölçümleri Melbourne, Florida' da Uzun Süreli Gelişim (LTE)' de 700 MHz'de iki cihazdan üç farklı sürüş testiyle toplandı. Bu tezde, bu ölçümler karşılaştırılmış ve sunulmuştur. Bu deneyin doğruluğunu anlamak için stokastik araçlardan ve teorik analizden yararlanılmıştır.

Özet (Çeviri)

In cellular technology, before giving service to customers, coverage estimation, network optimization, and maintenance rely on RSRP (Received Signal Reference Power) measurements that are collected in a given area. This measurement collection is called“drive test or drive testing”that is very common practical experiment for RF engineers. These measurements are usually recorded by a professional receiver or a professional phone with appropriate software and license. A scanning receiver, PCTEL SeeGull EX scanning Receiver in this thesis, is a common professional tool for RF engineers to collect data. A cell phone, HTC One M7 for this experiment, has an appropriate application created by a Ph.D. student at Florida Institute of Technology in order to record the measurements. There may be some difference between a given coverage area and the area customers experience. Because of that, the target of this thesis is to show that there is a significant difference between the scanning receiver and the cell phone in terms of customers' experience. RSRP measurements were collected in Melbourne, FL with three different drive test from two devices at 700MHz in Long Term Evolution (LTE). These measurements were compared and presented in this thesis. Stochastic tools and theoretical analysis were utilized in order to understand the validity of this experiment.

Benzer Tezler

  1. Bilişsel radyo için uzay zaman kodlamaya dayalı girişimsiz spektrum paylaşımı

    Interference-free spectrum sharing in cognitive radio based on space time coding

    MOHAMMADREZA BABAEI

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. HASAN ÜMİT AYGÖLÜ

  2. GPS ile elektronik uzaklık ölçülerin ölçeklerinin karşılaştırılması

    The scale comparison between GPS and EDMs

    AHMET KARABURUN

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    Jeodezi ve Fotogrametri Ana Bilim Dalı

    DOÇ. DR. ERSOY ARSLAN

  3. Yüksek güçlü IGBT'ler için kapı sürme devresi

    Gate drive circuit for high power IGBTs

    OSMAN TANRIVERDİ

    Doktora

    Türkçe

    Türkçe

    2023

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ DENİZ YILDIRIM