Geri Dön

ZnO@BD-g-C3N4 nano yaprak malzemesinin hazırlanması ve antimikrobiyal etkinliğinin incelenmesi

Preparation of ZnO@BD-g-C3N4 nano sheet material and investigation of its antimicrobial effectiveness

  1. Tez No: 886375
  2. Yazar: AHMET ÖZKAN
  3. Danışmanlar: PROF. DR. FEYYAZ DURAP
  4. Tez Türü: Yüksek Lisans
  5. Konular: Biyoloji, Kimya, Biology, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2024
  8. Dil: Türkçe
  9. Üniversite: Dicle Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Nanoteknoloji Ana Bilim Dalı (disiplinlerarası)
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Çalışmamızda çinko oksit yüklü benzen-doped grafit karbon nitrür (ZnO@BD-g-C3N4) destekli nano yaprak malzemeleri hazırlanması ve antimikrobiyal aktivitelerinin incelenmesi amaçlanmıştır. BD-g-C3N4 nanokompozit üre ve m-trihidroksibenzenin termal polikondensasyonu hazırlanmıştır. Daha sonra birlikte çöktürme yöntemi kullanılarak, farklı derişimlerdeki (0,04 - 0,24 M) sodyum bikarbonat ve çinko asetatın polietilen glikol eşliğindeki reaksiyonuyla elde edilen farklı miktarlardaki ZnO nanopartikülleri sentezlenen BD-g-C3N4'ün eklenmesiyle destek malzemesine dekore edilmiştir. Antimikrobiyal etkisi en yüksek olan nanomalzemenin FTIR, Uv-Dr, XRD, SEM ve SEM-EDX ile elektronik ve morfolojik özellikleri karakterize edilmiştir. Hazırlanan ZnO@BD-g-C3N4 nanokompozitinin antibakteriyel ve antifungal aktiviteleri küçük değişikliklerle agar kuyucuk difüzyon yöntemi ile Pseudomonas aeruginosa (P. aeruginosa) ATCC 27853, Escherichia coli (E. coli) ATCC 25922, Bacillus subtilis (B. subtilis) ATCC 6633, Staphylococcus aureus (S. aureus) ATCC 25923 ve Candida albicans (C. albicans) ATCC 10231 mikroorganizmaları üzerinde antibakteriyel (Gram – ve +) ve antifungal aktiviteleri test edilmiştir. Sonuç olarak, çalışma kapsamında test edilen ZnO@BD-g-C3N4 nanoyaprak malzemelerinin Gram (+) bakteri olan S. aureus ve Gram (-) bakteri olan P. aeruginosa üzerinde antibakteriyel aktiviteye sahip olduğu gözlenmiştir. Ancak C. albicans üzerinde herhangi bir antifungal aktivite gözlenmemiştir.

Özet (Çeviri)

The aim of this study was to prepare zinc oxide loaded benzene-doped graphite carbon nitride (ZnO@BD-g-C3N4) supported nanosheet materials and to investigate their antimicrobial activity. BD-g-C3N4 nanocomposite was prepared by thermal polycondensation of urea and m-trihydroxybenzene. Then, using the co-precipitation method in accordance with the literatures, different amounts of ZnO nanoparticles obtained by the reaction of sodium bicarbonate and zinc acetate at different concentrations (0.04-0.24 M) in the presence of polyethylene glycol were decorated on the support material by adding the synthesized BD-g-C3N4. The electronic and morphological properties of the nanomaterial with the highest antimicrobial effect were characterized by FTIR, Uv-Dr, XRD, SEM and SEM-EDX. Antibacterial (Gram - and +) and antifungal activities of the prepared ZnO@BD-g-C3N4 nanocomposite were tested on Pseudomonas aeruginosa (P. aeruginosa) ATCC 27853, Escherichia coli (E. coli) ATCC 25922, Bacillus subtilis (B. subtilis) ATCC 6633, Staphylococcus aureus (S. aureus) ATCC 25923 and Candida albicans (C. albicans) ATCC 10231 microorganisms by agar well diffusion method with minor changes. As a result, the ZnO@BD-g-C3N4 nanosheets materials tested in the study showed antibacterial activity on Gram (+) bacteria S. aureus and Gram (-) bacteria P. aeruginosa. However, no antifungal activity was observed on yeast C. albicans.

Benzer Tezler

  1. ZnO@BD-g-C3N4 nano kompozitin hazırlanması ve metilen mavisi bozunmasında fotokatalitik etkinliğinin incelenmesi

    Preparation of ZnO/BD-C3N4 nanocomposite and investigation of photocatalytic efficiencyin methylene blue decrease

    ABDURRAHMAN KAYMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    KimyaDicle Üniversitesi

    Nanoteknoloji Ana Bilim Dalı (disiplinlerarası)

    PROF. DR. MURAT AYDEMİR

  2. Real and reactive power optimization by approximate sub-optimum techniques

    Yaklaşık ayrıştırma yöntemi ile etkin ve tek güç optimizasyonu

    AYDOĞAN ÖZDEMİR

  3. Atomic layer deposition of III-nitrides and metal oxides; their application in area selective ALD

    III-nitratların ve metal oksitlerin atomik katman kaplamısı; bunların alan seçici ALD`deki uygulamaları

    ALI HAIDER

    Doktora

    İngilizce

    İngilizce

    2017

    Bilim ve Teknolojiİhsan Doğramacı Bilkent Üniversitesi

    Malzeme Bilimi ve Nanoteknoloji Ana Bilim Dalı (disiplinlerarası)

    Assist. Prof. AYKUTLU DANA

    DR. NECMİ BIYIKLI

  4. Kuantum matrisleri ve bessel fonksiyonları

    Quantummatrices and bessel functions

    ABDULKERİM SARACOĞLU

    Doktora

    Türkçe

    Türkçe

    1993

    Matematikİstanbul Teknik Üniversitesi

    PROF.DR. METİN ARIK

  5. Elektrik ark fırını baca tozlarının hidrometalurjik değerlendirilmesi

    Hydrometallurgical treatment of electric arc furnace stellmaking flue-dusts

    A.ALPAY KIRDAR

    Yüksek Lisans

    Türkçe

    Türkçe

    1991

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. İSMAİL DUMAN