Porselen karo üretiminde dijital baskı tekniğine uygun sır geliştirilmesi
Development of glaze suitable for digital printing technique in porcelain tile production
- Tez No: 892021
- Danışmanlar: DOÇ. DR. ŞEFİK BARAN TARHAN
- Tez Türü: Yüksek Lisans
- Konular: Güzel Sanatlar, Fine Arts
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Uşak Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Seramik Ana Sanat Dalı
- Bilim Dalı: Seramik Sanat Dalı
- Sayfa Sayısı: 100
Özet
21. yüzyılda dijital çağdaki hızlı gelişimle birlikte tasarım alanına yönelik yenilikler seramik ürünlerin satışında önemli bir noktaya gelmiştir. Geliştirilen yeni teknolojiler ile yapılan çeşitli uygulamalar ürün geliştirme süreçlerini son derece olumlu etkilemiş ve seramik sektörüne önemli katkılarda bulunmuştur. Bu bağlamda, inkjet baskı sistemi, yüksek çözünürlüklü ve çok renkli desenlerin seramik yüzeylere daha hızlı ve verimli bir şekilde uygulanmasına olanak sağlayarak tasarım esnekliği ve çeşitliliği sunmaktadır. Bunun yanı sıra, ihtiyaca göre özel ve kişiselleştirilmiş tasarımlar üretilmesini mümkün kılarak müşteri taleplerine daha hızlı, kolay ve etkin bir şekilde yanıt verilmesini sağlamaktadır. Bu tez çalışmasında, seramik karo fabrikalarında dijital baskı yöntemi ile üretilen porselen karolara uygun mat ve parlak sır kompozisyonlarının geliştirilmesi ve yeni sır reçetelerinin oluşturulması amaçlanmıştır. Seramik sektöründe karşılaşılan yüzey kusurlarını en aza indirerek, istenilen mat ve parlak yüzey dokularını elde etmek için sır araştırmaları yapılmıştır. Ayrıca, farklı oksitler içeren hammaddeler eklenerek inkjet baskı yöntemi ile basılan renklerin performansının incelenmesi ve bu eklemelerin renk algısı üzerindeki etkilerinin anlaşılması hedeflenmiştir. Geliştirilen sır reçeteleri, laboratuvar ortamında jet değirmenlerde bilyalı öğütmeden geçirilmiş, angoplanmış ham karolar üzerine uygulanmış ve hızlı pişirim gerçekleştirilmiştir. Pişirilen sırların renk değerleri spektrometre cihazı ile (L*, a*, b*) ve parlaklıkları glossmetre cihazı ile incelenmiştir. Denemeler sonucunda, istenilen değerlere uygunluk gösteren reçetelerin üretim denemeleri yapılmış ve yüzey standartlarını karşılayıp karşılamadığı test edilmiştir. Üretim denemelerinde test edilen reçeteler arasından aşınma direnci, çizilme direnci, asit direnci ve fırınlama sonrası uygun aralıkta deformasyon sağlayan reçete, üretim reçetesi olarak belirlenmiştir.
Özet (Çeviri)
In the 21st century, with the rapid development in the digital age, innovations in the field of design have become an important point in the sale of ceramic products. Various applications made with the new technologies developed have affected the product development processes extremely positively and made significant contributions to the ceramic industry. In this context, the inkjet printing system offers design flexibility and diversity by allowing high-resolution and multi-color patterns to be applied to ceramic surfaces faster and more efficiently. In addition, it makes it possible to produce special and personalized designs according to needs, enabling faster, easier and more effective response to customer demands. This thesis aims to develop matte and glossy glaze compositions suitable for porcelain tiles produced by digital printing methods in ceramic tile factories and to create new glaze recipes. Glaze researches were carried out to obtain the desired matte and glossy surface textures by minimizing the surface defects encountered in the ceramic industry. In addition, it aimed to examine the performance of colors printed by the inkjet printing method by adding raw materials containing different oxides and to understand the effects of these additions on color perception. The developed glaze recipes were applied on raw tiles that were ball milled in jet mills, angoped, and fired rapidly in the laboratory environment. The spectrometer and gloss meter examined the color values (L*, a*, b*) and gloss values of the fired glazes. As a result of the trials, production trials were carried out for the recipes that conformed to the desired values and tested whether they met the surface standards. Among the recipes tested in the production trials, the recipe that provided abrasion resistance, scratch resistance, acid resistance, and deformation in the appropriate range after baking was determined as the production recipe. This study offers important contributions to increase the applicability of digital printing technology in ceramic tile production and to improve the aesthetic and functional properties of products.
Benzer Tezler
- Porselen karo üretiminde pirofillitin kullanım olanaklarının araştırılması
Investigation of the possible wage of pyrophyllite in the production of porcelain tiles
FURKAN ÖZATA
Yüksek Lisans
Türkçe
2020
Seramik MühendisliğiKütahya Dumlupınar ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. RASİM CEYLANTEKİN
- Porselen karoların üretim koşullarının ve teknik özelliklerinin geliştirilmesi
Development of technical properties and production conditions of porcelain tiles
ZAHİDE BAYER ÖZTÜRK
Doktora
Türkçe
2012
Seramik MühendisliğiAnadolu ÜniversitesiSeramik Mühendisliği Ana Bilim Dalı
PROF. DR. NURAN AY
- Porselen karo üretiminde öğütme verimliliği ve üretim süreçlerine etkileri
Milling efficiency in porcelain tile production and effects on production process
AYTAÇ SAMET KÜÇÜKER
Doktora
Türkçe
2009
Seramik MühendisliğiAnadolu ÜniversitesiSeramik Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPAGUT KARA
- Porselen karo bünyesinde Aydın Çine bölgesi sodyum feldspatının yerine Çankırı Kalfat yöresi feldspatlarının kullanılabilirliğinin araştırılması
Investigation of usage of Cankiri Kalfat region feldspars instead of Aydin Cine sodium feldspar in the porcelain tile body
SEZGİN AKSAN
Yüksek Lisans
Türkçe
2019
Seramik MühendisliğiKütahya Dumlupınar ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. İSKENDER IŞIK
- Sırlı porselen karo bünyesinde albit yerine nefelinli siyenitin kullanılabilirliğinin araştırılması
Investigation use of nepheline syenite instead of albite within glazed porcelain tile body
MAHMUT AYDIN
Yüksek Lisans
Türkçe
2021
Seramik MühendisliğiKütahya Dumlupınar ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. İSKENDER IŞIK