Komagataeibacter rhaeticus kullanılarak nanoparçacık katkılı bakteriyel selüloz üretimi ve karakterizasyonu
Production and characterization of nanoparticle induced bacterial cellulose using komagataeibacter rhaeticus
- Tez No: 902370
- Danışmanlar: PROF. DR. HAMDİ ÖĞÜT
- Tez Türü: Doktora
- Konular: Biyomühendislik, Biyoteknoloji, Mikrobiyoloji, Bioengineering, Biotechnology, Microbiology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Bursa Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Biyoteknoloji Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 100
Özet
Bakteriyel selüloz (BS), biyoteknoloji alanında, özellikle sağlık ve doku mühendisliği gibi pek çok farklı uygulamada, saflığı, yüksek kristallik derecesi, su tutma kapasitesi, gerilme direnci ve geniş ölçekte uyum sağlama yeteneğine sahip olması nedeniyle kullanılmaktadır. Aynı zamanda, eklenen katkı malzemeleri ile antibakteriyel aktivite gibi önemli özellikler kazandırılabilmektedir. Bu çalışmada, Komagataeibacter rhaeticus K23 kullanılarak biyo-selüloz üretimi için optimum sıcaklık, pH, inokulum konsantrasyonu ve inkübasyon süresi değerleri Taguchi yöntemi ile belirlenmiştir. Deneyler sonucunda, maksimum BS üretimi için optimum parametreler, 32 °C, pH 5,5, 8 log KOB·mL−1 inokulum konsantrasyonu ve 14 gün inkübasyon süresi olarak tespit edilmiştir. Bu parametrelerden, BS verimini en çok etkileyen faktör inokulum konsantrasyonu olarak belirlenmiştir. Bu nedenle, daha farklı inokulum konsantrasyonları (8,5, 9, 9,5, 10 ve 10,5 log KOB·mL−1) denenmiş ve 8 log KOB·mL−1 inokulum değeri diğer konsantrasyonlardan anlamlı ölçüde daha yüksek (p < 0,002) BS verimi sağlamıştır. Ayrıca, 14 gün inkübasyon süresi, 7, 9, 11,13, 15, 16, 17, 21 ve 28 gün olmak üzere diğer inkübasyon sürelerinden anlamlı ölçüde daha yüksek (p < 0,001) BS verimi ile sonuçlanmıştır. Bunların yanı sıra, Komagataeibacter rhaeticus tarafından optimize edilen parametreler ile üretilen BS'ye, sentezlenen çinko oksit (ZnO) nanoparçacıkları katılarak antimikrobiyal özellik kazanıp kazanmayacağı ve kristallik derecesi, su tutma kapasitesi, termal ve mekanik davranışı gibi özellikleri üzerine etkileri araştırılmıştır. BS-ZnO nanokompozit malzemeler, BS membranlarının %1 çinko oksit çözeltisine daldırılması ile elde edilmiştir. Daha sonra, ZnO çözeltisine daldırılmış membranlar 24 saat boyunca 37 °C'de kurutulmuştur. Nanokompozit malzemenin antibakteriyel özelliği, Gram-pozitif ve Gram-negatif bakteriyel suşlara (Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 29213 ve Bacillus subtilis RSKK 388) karşı test edilmiş ve antibakteriyel aktivite göstermiştir. Aynı zamanda, üretilen BS-ZnO nanokompozitler XRD, SEM, FTIR, DSC, TGA, su tutma kapasitesi ve mekanik özellikler bakımından karakterize edilmiştir. XRD sonuçları, ZnO-NP'lerin hegzagonal wurtzite yapısına sahip olduğunu, SEM sonuçları ise ZnO-NP'lerin homojen dağılımını göstermiştir. ZnO-NP'lerin eklenmesi, BS membranının termal stabilitesini ve mekanik dayanıklılığını önemli ölçüde artırmıştır (p < 0,05) ve antibakteriyel aktivite kazanmasını sağlamıştır. Bununla beraber, Young modülü BS-ZnO nanokompozit için önemli ölçüde azalmış (p = 0.000) ve BS-ZnO nanokompozitinin su tutma kapasitesi, BS ile benzer bulunmuştur (p > 0,05). Bu çalışma, fonksiyonel ve daha stabil biyomalzemeler olarak BS-ZnO nanokompozitlerinin sentezlenmesine yönelik önemli ve yenilikçi bir yaklaşım sunmaktadır.
Özet (Çeviri)
Bacterial cellulose (BC) is used in many different applications in the field of biotechnology, especially in healthcare and tissue engineering, due to its high purity, high crystallinity, water holding capacity, tensile strength and ability to adapt on a large scale. At the same time, important properties such as antibacterial activity can be added with additives. In this study, the optimum temperature, pH, inoculum concentration and incubation time values for bio-cellulose production using Komagataeibacter rhaeticus K23 were determined using Taguchi method. The experiments revealed that the optimal parameters for maximum BC production were a temperature of 32 °C, pH 5.5, an inoculum concentration of 8 log CFU·mL−1, and an incubation period of 14 days. Among these parameters, the inoculum concentration was identified as the factor most influencing BC yield. Therefore, different inoculum concentrations (8.5, 9, 9.5, 10, and 10.5 log CFU·mL−1) were tested, and an inoculum value of 8 log CFU·mL−1 resulted in significantly higher BC yield compared to other concentrations (p < 0.002). Additionally, 14-day incubation period yielded significantly higher BC production compared to other incubation periods, which were 7, 9, 11, 13, 15, 16, 17, 21, and 28 days (p < 0.001). In addition, it was investigated whether the optimized BC production by Komagataeibacter rhaeticus would gain antimicrobial properties by incorporating synthesized zinc oxide (ZnO) nanoparticles and its effects on properties such as crystallinity, water-holding capacity, thermal, and mechanical behavior. BC-ZnO nanocomposite materials were obtained by immersing BC membranes in a 1% zinc oxide solution. Subsequently, the immersed membranes were dried at 37 °C for 24 hours. The antibacterial property of the nanocomposite material was tested against Gram-positive and Gram-negative bacterial strains (Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 29213, and Bacillus subtilis RSKK 388) and showed antibacterial activity against all tested strains. Additionally, the produced BC-ZnO nanocomposites were characterized in terms of XRD, SEM, FTIR, DSC, TGA, water-holding capacity, and mechanical properties. XRD results revealed the hexagonal wurtzite structure of ZnO nanoparticles, while SEM results indicated their homogeneous distribution. The addition of ZnO nanoparticles significantly increased the thermal stability and mechanical strength of the BC membrane (p < 0.05) and conferred antibacterial activity. However, the Young's modulus decreased significantly for the BC-ZnO nanocomposite (p = 0.000). The water-holding capacity of the BC-ZnO nanocomposite was found to be similar to that of BC (p > 0.05). This study presents an important and innovative approach to synthesizing BC-ZnO nanocomposites as functional and more stable biomaterials.
Benzer Tezler
- Komagataeibacter sp. GUS3 kullanılarak bakteriyel selüloz üretimi ve karakterizasyonu
Bacterial cellulose production and characterization using Komagataeibacter sp. GUS3
HÜMEYRA ODABAŞ
Yüksek Lisans
Türkçe
2022
Gıda Mühendisliğiİstanbul Sabahattin Zaim ÜniversitesiGıda Beslenme Ana Bilim Dalı
DOÇ. DR. BANU METİN
- Mikrobiyal selüloz üretimi ve üretim koşullarının araştırılması
Production of microbial cellulose and investigation of production conditions
CANSU SEVİM
Yüksek Lisans
Türkçe
2021
BiyoteknolojiHacettepe ÜniversitesiBiyoloji Ana Bilim Dalı
PROF. DR. IŞIL SEYİS BİLKAY
- Bakteriyel selüloz membranların filtre olarak kullanımının araştırılması
Investigation of the use of bacterial cellulose membranes as filters
BAHAR SAMYELİ
- Sirkeden izole edilen asetik asit bakterisi ile selüloz üretimi ve bakteriyel selülozun karakterizasyonu
Production of cellulose by acetic acid bacteria isolated from wine vinegar and characterization of bacterial cellulose
BURAK TOP
Yüksek Lisans
Türkçe
2018
BiyolojiPamukkale ÜniversitesiBiyoloji Ana Bilim Dalı
PROF. DR. NAZİME MERCAN DOĞAN
- Mikrobiyal selülozun boya gideriminde kullanımının araştırılması
Investigation on the use of microbial cellulose for dye decolorization
MERİÇ BİRBEN
Yüksek Lisans
Türkçe
2019
BiyolojiHacettepe ÜniversitesiBiyoloji Ana Bilim Dalı
PROF. DR. IŞIL SEYİS BİLKAY