Geri Dön

Polipropilen cam elyafı ile üretilmiş otomotiv yalıtım sistemi parçasının akustik performansının araştırılması

Acoustic performance assessment of polypropylene glass fiber based vehicle interior trim part

  1. Tez No: 911878
  2. Yazar: ORHUN GEDİK
  3. Danışmanlar: DOÇ. DR. LEVENT YÜKSEK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Otomotiv Mühendisliği, Automotive Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2024
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Enerji Bilim Dalı
  13. Sayfa Sayısı: 97

Özet

Otomotiv sektöründe hafifletme, maliyet azaltma ve ürünlerin sürdürülebilir olma amacı sonucunda alternatif malzemeler araştırılmaya başlanmıştır. Ürün geliştirme fazlarında alternatif malzemeler ile üretilmiş parçalar, ana otomotiv üreticilerinin spesifikasyonlarında bulunan testlere tabi tutulmuş ve bu testleri karşılaması beklenmiştir. Taşıtta kabin içerisinde bulunan yalıtım sistemleri, kullanıcı için farkedilebilir bölgede olduklarından dolayı, ön yüzlerinde görsel kalite gerektirir. Aynı zamanda ses absorpsiyonu ve dayanım performansı beklentileri nedeniyle de, parça birden çok, farklı malzeme ile kompozisyon haline getirilerek geliştirilmiştir. Bu tez çalışmasında Ford marka hafif ticari bir araçta bulunan bir adet sesyalıtım parçasının designında/formunda herhangi bir değişiklik yapmadan, yalıtım ve yutum performansı göz önünde alınarak alternatif bir malzeme ile yeni bir kompozisyon yaratılarak hafifletme çalışması yapılmıştır. Fiziksel olarak parçanın prototipi üretilmiştir ve hat seviyesi parça ile ayrı ayrı alfa kabintestine sokulmuş ve absorpyon katsayısı ölçümü alınmıştır. Yapılan bu alfakabin ölçümü, araç testi ile desteklenmiştir.

Özet (Çeviri)

In the automotive sector, as a result of the aim of lightweight, cost reduction and sustainability of the products, alternative materials have started to be investigated. Parts produced with alternative materials, during the product development phases were subjected to the tests found in the specifications of the major automotive manufacturers and were expected to meet these tests.Insulation systems are in the passenger cabin requires visual quality on the front faces as they are noticeable for the user. At the same time, due to the sound absorption and strength requirements, it was possible to produce multiple layers with different materials. In this study, a new composition with an alternative material was created by taking into consideration of cost, insulation performance and structural strength without making any change in thedesign or shape of a sound insulation part in a Ford light commercial vehicle.The prototype of the part was produced and the mass production level parts subjected to alpha cabin test separately and absorption coefficient measurements was taken. Those products are compared in terms of insulation performance.

Benzer Tezler

  1. Sürekli cam elyaf takviyeli polipropilen levhaların şekillendirilmesi ve karakterizasyonu

    Forming and characterization of continious glass elyaf reinforced polypropylen sheets

    SAMET ŞAHİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Mekatronik MühendisliğiMarmara Üniversitesi

    Mekatronik Ana Bilim Dalı

    PROF. DR. MUSTAFA ÖKSÜZ

  2. Elyaf takviyeli, termoplastik matrisli kompozit malzeme üretimi ve karakterizasyonu

    Production and characterization of fiber reinforced thermoplastic composite material

    AYLİN BEKEM

    Doktora

    Türkçe

    Türkçe

    2013

    Mühendislik BilimleriYıldız Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. AHMET ÜNAL

  3. Effects of processing parameters on the mechanical behavior of continuous glass fiber/polypropylene composites

    Sürekli cam elyaf/polipropilen kompozitlerin mekanik davranışlarına üretim parametrelerinin etkileri

    NEVRES EMRAH MERTER

    Yüksek Lisans

    İngilizce

    İngilizce

    2009

    Metalurji Mühendisliğiİzmir Yüksek Teknoloji Enstitüsü

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. METİN TANOĞLU

  4. Termoplastik prepreg esaslı ağır ticari araç koltuğu tasarımı, analizi ve üzerine enjeksiyon prosesi ile üretimi

    Thermoplastic prepreg based heavy commercial vehicle seat design, analysis and production by over-molding injection process

    SERKAN BİRÇİÇEK

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Polimer Bilim ve TeknolojisiKocaeli Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    DOÇ. DR. MUSTAFA ÖZGÜR BORA

  5. Development of new generation, high performance polypropylene composites

    Yeni nesil, yüksek performanslı polipropilen kompozitlerin geliştirilmesi

    ORKUN KAYMAKÇI

    Doktora

    İngilizce

    İngilizce

    2021

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. NURSELİ UYANIK