UNIAXIAL TENSILE BEHAVIOR OF TEXTILE-REINFORCED CEMENTITIOUS COMPOSITES MADE OF CARBON AND GLASS YARNS
KARBON VE CAM İPLİKLERDEN OLUŞAN TEKSTİL TAKVİYELİ ÇİMENTO ESASLI KOMPOZİTLERİN TEK EKSENLİ ÇEKME DAVRANIŞI
- Tez No: 927897
- Danışmanlar: PROF. DR. İSMAİL ÖZGÜR YAMAN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Tekstil Takviyeli Çimentolu Kompozit, Cam İplik, Karbon İplik, Donatı Oranı, Atkı Yönü, Tek Eksenli Çekme Davranışı, Textile Reinforced Concrete, Glass Yarn, Carbon Yarn, Reinforcement Ratio, Warp Direction, Uniaxial Tensile Behavior
- Yıl: 2024
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Tekstil takviyeli beton (TRC), çimentolu bir matris içinde cam, karbon veya bazalt tekstiller kullanan yenilikçi bir betondur. Cam ve karbon tekstiller kullanılarak TRC'nin özellikleri üzerine çok sayıda araştırma yapılmış olmasına rağmen, özellikle kısa lifler eklendiğinde bu tekstillerin farklı matrislerde nasıl performans gösterdiğine dair kapsamlı bir çalışmaya hala ihtiyaç vardır. Bu nedenle, bu çalışmanın amacı, iki farklı tekstilin (karbon ve cam), çelik veya PVA elyaflarla desteklenmiş iki farklı temel matris içinde kullanıldığında elde edilen, tekstil takviyeli çimentolu kompozitlerin (TRCC) özelliklerini araştırmaktır. Farklı bağlayıcı içeriklerine sahip olan, M7 ve ECC olarak bilinen iki farklı matris, ayrıca değişen miktarlarda kısa çelik ve PVA lifleri içermektedir. Bu çalışmada kullanılan her iki tekstil de ızgara benzeri bir yapıya sahip olup, cam tekstili (G) dokumasız, karbon tekstili (C) ise dokuma yöntemiyle üretilmiştir. Bu tekstiller, farklı takviye oranlarına sahip G-TRCC ve C-TRCC numuneleri oluşturmak için matrislerde farklı şekilde katmanlandırılmıştır. TRCC numunelerinin tek eksenli çekme davranışı bir çatallı mafsal test düzeneği kullanılarak belirlenmiştir. viii Deneysel program sonucunda, kısa liflerin çimentolu kompozitlere dahil edilmesinin karışımların işlenebilirliğini önemli ölçüde azalttığı tespit edilmiştir. Bu nedenle, kısa liflerin verimli kullanımı için, tekstillerin ızgara açıklığı ile kısa liflerin boyutu uyumlu olacak şekilde seçilmelidir. TRCC'nin mekanik özellikleri, TRCC'nin çatlama ve nihai mukavemeti açısından karakterize edildiğinde, kompozitin çatlama mukavemetinin harç türünden, nihai mukavemetinin ise tekstil türü ve miktarından etkilendiği görülmüştür. Kısa lif ilavesinin TRCC'nin mekanik özellikleri üzerinde çok az etkisi olmuştur. Tekstilde gözlenen maksimum gerilme, karbon tekstillerin mukavemeti ile neredeyse aynıyken, cam tekstillerde hafif bir düşüş olmuştur.
Özet (Çeviri)
Textile-reinforced concrete (TRC) is an innovative concrete that uses glass, carbon, or basalt textiles in a cementitious matrix. Although much research has been done on the properties of TRC using glass and carbon textiles, there is still a need for a comprehensive study of how these textiles perform in different matrices, especially when short fibers are added. Therefore, the aim of this study was to investigate the properties of textile reinforced cementitious composites (TRCC) obtained when two different textiles (carbon and glass) are used in two different base matrices reinforced with steel or PVA fibers. The two different cementitious matrices, known as M7 and ECC, had different binder contents and also incorporated short steel and PVA fibers in varying amounts. Both textiles used in this study have a grid-like structure, with the glass textile (G) being non-woven and the carbon textile (C) being woven. These textiles were layered differently in the matrices to create G-TRCC and C-TRCC specimens with varying reinforcement ratios. The uniaxial tensile behavior of the TRCC specimens was determined using a clevis-grip test setup. As a result of the experimental program, it was found that the inclusion of short fibers in cementitious composites significantly reduced the workability of the mixtures. vi Therefore, for efficient use of short fibers, the grid size of the textiles and the length of the short fibers should be chosen to be compatible. When the mechanical properties of the TRCC were characterized in terms of the cracking and ultimate strength of the TRCC, it was found that the cracking strength of the composite appeared to be affected by the type of mortar and the ultimate strength by the type and amount of textile. The addition of the short fibers had little effect on the mechanical properties of the TRCC. The maximum stress observed on the textile in the composite was almost the same as the strength of the bare carbon textile, while there was a slight decrease for the glass textile.
Benzer Tezler
- Betonarme kolonların deprem performansının tekstil donatılı / donatısız cam lifli püskürtme harçla iyileştirilmesi
Improvement of seismic performance of reinforced concrete columns using glass fiber reinforced sprayed mortar with / without textile reinforcement
ALİ OSMAN ATEŞ
Doktora
Türkçe
2022
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ALPER İLKİ
- An experimental investigation on uniaxial tensile, slip-bond and creep behavior of carbon textile reinforced cementitious composites (C-TRCC)
Karbon tekstil takviyeli çimentolu kompozitlerin (K-TTÇK) tek eksenli çekme, kayma-bağ ve sünme davranışının deneysel incelenmesi
IRAJ SHARIFI
Doktora
İngilizce
2025
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL ÖZGÜR YAMAN
DR. BURHAN ALAM
- Self-healing of high-performance fibre-reinforced cementitious composites
Yüksek performanslı fiber donatılı çimento esaslı kompozitlerin kendi kendini iyileştirmesi
ÖMER KAYA
Yüksek Lisans
İngilizce
2011
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET ALİ TAŞDEMİR
- Tekrarlı yükler etkisindeki bölme duvarların çimento esaslı tekstil kompozitlerle iyileştirme yöntemlerinin geliştirilmesi
Improving retrofitting methods for partition walls under lateral cyclic loading using cement based textile composites
DİDEM DÖNMEZ
Doktora
Türkçe
2021
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiDeprem Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA GENÇOĞLU
- Tekstil kompozitlerinin sonlu elemanlar uygulamaları
The finite element applications of textile composites
SERHAN GERİKALMAZ
Yüksek Lisans
Türkçe
2010
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MUSTAFA BAKKAL