“UItfordringer og muligheter med implementering av BIM ved bruk av Lean Construction, der det settes søkelys på byggebransjens videre teknologiske utvikling”
Challenges and opportunities with the implementation of BIM using Lean Construction, where the focus is on the construction industry's further technological development.
- Tez No: 933527
- Danışmanlar: DOÇ. KNUT ERİK BANG
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: İngilizce
- Üniversite: Unıversıty Of Stavanger
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
İnşaat sektörü, genel itibarıyla verimsizlikle eleştirilmekte olup; maliyet etkinliği, üretkenlik, uygulanabilirlik ve israfın azaltılması açısından önemli bir iyileşme potansiyeli barındırmaktadır. Bu durum, özellikle inşaat sektörü diğer endüstrilerle kıyaslandığında daha da dikkat çekici hâle gelmektedir. Söz konusu problemlere yanıt olarak, sektörde çeşitli gelişim ve dönüşüm odaklı girişimler başlatılmıştır. Bu bağlamda, yeni teknolojiler, araçlar ve yöntemler teşvik edilmiş; bu da inşaat projelerinin tasarım ve uygulama süreçlerinde köklü bir paradigma değişimini beraberinde getirmiştir. Alan yazındaki tutarlı bulgular; Yalın felsefeye ilişkin temel bilgi eksikliği, BIM (Yapı Bilgi Modellemesi) konusundaki yetersiz yetkinlik, sektör genelinde değişime karşı direnç, sürekli iyileştirmeye yeterince önem verilmemesi ve tedarik zincirindeki tüm paydaşların sürece yeterince dâhil edilmemesi gibi temel eksiklikleri ortaya koymaktadır. Araştırma kapsamında hem nitel hem de nicel veri toplama yöntemlerinden faydalanılmıştır. Kuramsal bilgiler doküman incelemesi yoluyla elde edilirken, ampirik veriler; anket uygulamaları, derinlemesine mülakatlar ve doküman analizinin ardından gerçekleştirilen KHiB projesine ilişkin bir durum çalışması aracılığıyla toplanmıştır. Araştırma bulguları geniş bir yelpazeye yayılmakta olup, bazı unsurlar hem ampirik verilerde hem de literatürde öne çıkan temel noktalar olarak dikkat çekmektedir. Ancak, bu bulgular arasında bazı farklılıklar da mevcuttur. Söz konusu durum, 6. Bölüm'de ampirik verilerin literatürle karşılaştırmalı analizinin yapılması suretiyle ayrıntılı biçimde ele alınacaktır. Devamında, 7. Bölüm'de, yüksek lisans tezinin ana problemi olan“Yalın İnşaat yaklaşımıyla BIM uygulamalarının entegrasyonunda karşılaşılan zorluklar ve potansiyel fırsatlar”a yönelik araştırma soruları tartışılacaktır. Bu bölümde, inşaat sektörünün teknolojik gelişimine odaklanılacaktır. Son olarak, 8. Bölüm'de genel bir değerlendirme sunulacak ve gelecekte yapılabilecek çalışmalara yönelik önerilerde bulunulacaktır.
Özet (Çeviri)
The construction industry is largely criticized for being inefficient, and therefore has great potential for improvement in terms of cost efficiency, productivity, feasibility and waste. This is remarkable especially when one compares the construction industry with other industries. Therefore, in response to these problems, the industry has come up with various initiatives with the goal of development and change. As a result, newer technology, tools and methods have been promoted, which have led to a paradigm shift in the way a construction project is designed and implemented. Consistent findings in the literature point to a lack of basic knowledge about Lean philosophy, a lack of competence in BIM, resistance to change in the construction industry, as well as too little emphasis on continuous improvement and inclusion of all players in the supply chain. Both qualitative and quantitative methods of information retrieval have been used. Where the theory part was acquired by document review, the empirical data was acquired by questionnaire, conducting in-depth interviews and a document analysis with subsequent case study of the KHiB project. The research study reveals a wide range of findings, where some aspects appear to be central both in the empirical and in the literature, but there are also some differences here. This will be shown in more detail in Chapter 6, where the empirical data is set up against literature findings. Furthermore, Chapter 7 will discuss the research questions that are asked to answer the problem of the master's thesis: Challenges and opportunities with implementation of BIM using Lean Construction, where the focus will be on the construction industry's further technological development, and finally there will be a conclusion and a recommendation for further work in Chapter 8