Polimer destekli spinel ferrit nanoparçacıkların üretilmesi, karakterizayonu, yapısal ve manyetik özelliklerin incelenmesi
Production, characterisation, and investigation of the structural and magnetic properties of polymer-supported spinel ferrite nanoparticles
- Tez No: 1022307
- Danışmanlar: PROF. DR. BEKİR ÖZÇELİK
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Metalurji Mühendisliği, Mühendislik Bilimleri, Physics and Physics Engineering, Metallurgical Engineering, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2026
- Dil: Türkçe
- Üniversite: Çukurova Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, spinel yapılı manyetik nanoparçacıkların farklı sentez yaklaşımları altında elde edilmesi ve bunların yapısal, morfolojik ve manyetik özelliklerinin karşılaştırmalı olarak incelenmesi amaçlanmıştır. Bu kapsamda CoFe₂O₄, SrFe₂O₄ ve CuFe₂O₄ esaslı spinel ferrit nanoparçacıkları ile bunların Co–Sr, Cu–Sr ve Co–Cu katkılı türevleri sol-jel otomatik yanma, biyosentez ve birlikte çöktürme yöntemleri kullanılarak sentezlenmiştir. Elde edilen numunelerin faz oluşumu, kristal yapısı, morfolojisi, elementel bileşimi, bağ titreşimleri ve manyetik davranışları sırasıyla X-ışını kırınımı (XRD), taramalı elektron mikroskobu/enerji dağılımlı spektroskopi (SEM/EDS), Fourier dönüşümlü kızılötesi spektroskopi (FT-IR) ve titreşimli örnek manyetometresi (VSM) ile araştırılmıştır. Çalışma sonuçları, sentez yöntemi ve katyon yer değiştirmesinin spinel ferrit nanoparçacıkların mikroyapısı ve manyetik özellikleri üzerinde belirleyici olduğunu göstermiştir. Farklı yöntemlerle üretilen numunelerde kristallenme derecesi, tane boyutu, topaklanma eğilimi ve yüzey morfolojisinin değiştiği; buna bağlı olarak doyum mıknatıslanması, geri çağırıcı alan ve kalıcı mıknatıslanma gibi manyetik parametrelerin de önemli ölçüde etkilendiği belirlenmiştir. Özellikle üretim yöntemi ile kimyasal bileşimin birlikte değerlendirilmesinin, istenen uygulamaya uygun ferrit sisteminin seçilmesinde önemli olduğu görülmüştür. Elde edilen bulgular, spinel ferrit nanoparçacıkların manyetik ayırma, sensör, elektromanyetik uygulamalar ve ileri fonksiyonel malzeme tasarımları açısından dikkate değer bir potansiyele sahip olduğunu ortaya koymaktadır.
Özet (Çeviri)
In this study, it was aimed to synthesize spinel-structured magnetic nanoparticles by different preparation routes and to comparatively investigate their structural, morphological, and magnetic properties. For this purpose, CoFe₂O₄, SrFe₂O₄, and CuFe₂O₄ based spinel ferrite nanoparticles together with their Co–Sr, Cu–Sr, and Co–Cu substituted derivatives were synthesized by sol-gel auto-combustion, biosynthesis, and co-precipitation methods. The phase formation, crystal structure, morphology, elemental composition, bonding characteristics, and magnetic behavior of the obtained samples were examined by X-ray diffraction (XRD), scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometry (VSM), respectively. The results showed that both the synthesis route and cation substitution play a decisive role in determining the microstructure and magnetic response of the spinel ferrite nanoparticles. It was found that the degree of crystallization, grain size, agglomeration tendency, and surface morphology varied significantly depending on the preparation method, and these variations directly affected the magnetic parameters such as saturation magnetization, coercive field, and remanent magnetization. The comparative evaluation of production method and chemical composition demonstrated that both factors should be considered together in selecting a ferrite system suitable for a targeted application. The findings indicate that the synthesized spinel ferrite nanoparticles possess considerable potential for magnetic separation, sensing technologies, electromagnetic applications, and advanced functional material design.
Benzer Tezler
- Mikrodalga soğurucu polimer destekli manyetik nano kompozitlerin geliştirilmesi ve karakterizasyonu
Improving and characterization of polymer based magnetic nanocomposites' microwave absorbing
İBRAHİM SAİM ÜNVER
Yüksek Lisans
Türkçe
2017
Fizik ve Fizik MühendisliğiGebze Teknik ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. BULAT Z. RAMİ
- BaTiO3, NixZn1-xFe2O4, CoxZn1-xFe2O4, MnxZn1-xFe2O4, CuxNi1-xFe2O4, CuxCo1-xFe2O4 ve CuxMn1-xFe2O4 örneklerinin elektromanyetik soğurma özelliklerinin incelenmesi
Investigation of the electromagnetic absorption properties of BaTiO3, NixZn1-xFe2O4, CoxZn1-xFe2O4, MnxZn1-xFe2O4, CuxNi1-xFe2O4, CuxCo1-xFe2O4 and CuxMn1-xFe2O4 samples
HARUN BAYRAKDAR
Doktora
Türkçe
2011
Fizik ve Fizik MühendisliğiKocaeli ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. ERDOĞAN TARCAN
DOÇ. DR. KADİR ESMER
- Hasarlı omurilik onarımı için hücre destekli enjekte edilebilir ipek fibroin mikrotaşıyıcıların geliştirilmesi
Development of cell supported injectable silk fibroin microcarriers for repair of damaged spinal cord
BEGÜM SARGON
Yüksek Lisans
Türkçe
2023
BiyomühendislikHacettepe ÜniversitesiBiyomühendislik Ana Bilim Dalı
PROF. DR. MENEMŞE GÜMÜŞDERELİOĞLU
- Polimer destekli taç eterin sentezi ve katalizör olarak kullanılması
Başlık çevirisi yok
CANAN AKMİL
Yüksek Lisans
Türkçe
1993
Kimya Mühendisliğiİnönü ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. TURGAY SEÇKİN
- Polimer destekli organokalay hidrürlerin yapımı ve halka kapanma reaksiyonlarında kullanımı
Synthesis of polymer-supperted organotinhydride reagents and their use in cyclization reactions
HASAN ÖZYILDIRIM