Alüminyum alaşımlarının frezelenmesinde kimyasal kompozisyonun yüzey kalitesine etkileri
The Effects of chemical composition over quality during the milling of alloy aluminum
- Tez No: 105466
- Danışmanlar: DOÇ. DR. OSMAN ELDOĞAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Alüminyum alaşımları, yüzey kalitesi, sertlik
- Yıl: 2001
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 131
Özet
ÖZET
Özet (Çeviri)
SUMMARY The Effects Of Chemical Composition Over Surface Quality During The Milling Of Alloy Aluminum Keywords : Alloy aluminum, surface quality, hardness. This work maintains the purpose of enlightening the industriallists engaged in production efforts of higher surface quality during the milling of alloy aluminium, which has recently retained a quick-spreading area of usage, or those who may prefer alloy aluminium when it is presumed that the dasired surface quality could be obtained. In line whith this objective ; it has been worked on an alloy aluminium comprising 12 distinctive chemical composition and the patterns have been milled in varying cut depths, feeds and cutting speed, and their surface roughness has been gauged. As the^ result of a total of 480 milling operation in 40 different conditions for each pattern, ft was attempted to select the alloy aluminium havin the best surface quality. Similarly, the solidity of alloy has been mesured whith a view to examine the effects of chemical composition to solidity and of solidity to surface quality. The effects of cut depth to surface quality have also been observed in order to determine the most appropriate cut depth while taking finish cut. X1U
Benzer Tezler
- Alüminyum alaşımlarının frezelenmesinde kesme parametrelerinin ve soğutma şartlarının işlenebilirliğe etkisinin incelenmesi
Investigation of cutting parameters and cooling conditions' effects on the machinability in the milling of aluminum alloys
SERHAT FİLİZ
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiCelal Bayar ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. AHMET MURAT PİNAR
- Alüminyum alaşımlarının frezelenmesinde takım geometrisinin işlenebilirliğe etkisi
Effect of tool geometry on machinability in milling aluminium alloys
NESLİHAN AKDEMİR
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiGazi Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SELÇUK YAĞMUR
- Analysis of tool life for tungsten carbide helical end mills in milling aerospace aluminum
Havacılık endüstrisinde kullanılan alüminyum alaşımlarının karbür parmak frezeler ile işlenmesinde takım ömrü analizi
NEVZAT BİRCAN BUĞDAYCI
Yüksek Lisans
İngilizce
2013
Makine MühendisliğiKoç ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL LAZOĞLU
- Development of high performance cutting tools for machining of gamma-titanium aluminide intermetallic alloys, Ti6Al4V and inconel 718 in aerospace applications
Γ-titanyum alüminyum intermetalik alaşımlarının, Ti6Al4V ve inkonel 718 malzemelerinin havacılık uygulamaları için frezelenmesinde kullanılmak üzere yüksek performanslı takım ucu geliştirilmesi
MOHAMMAD AKMAL
Doktora
İngilizce
2017
Makine MühendisliğiKoç ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL LAZOĞLU
- Nano kristal elmas kaplanmış mikro takımların alüminyum 7075-T6 alaşımının işlenmesindeki performansının araştırılması
Investigation of the use of NCD micro-tools in the micro machining of aluminum 7075-T6 alloy
ABDULLAH SADIK TAZEGÜL
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiAfyon Kocatepe ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. KUBİLAY ASLANTAŞ