Geri Dön

Betonarme taşıyıcı sistemli yapıların güçlendirilmesinde beton elastisite modülü değişiminin yapısal çözümlemedeki etkisi

The Effect of the change in the modulus of elasticity of concrete, upon the structural analysis in the process of the reinforced concrete structures

  1. Tez No: 109559
  2. Yazar: EFKAN ERGİN
  3. Danışmanlar: PROF. DR. ÖMER ZAFER ALKU
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2001
  8. Dil: Türkçe
  9. Üniversite: Dokuz Eylül Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 70

Özet

n ÖZET Ülkemizde son yıllarda meydana gelen yersarsıntılarının ardından, yeni yapılacak yapılara ait dizayn şartnamelerinin değiştirilmesinin yanısıra, güçlendirilen yapı sayısı da artmıştır. Yapılarda, gerek proje ve imalat esnasında yeterli mühendislik hizmetlerinin verilememesi, gerekse kullanım amaçlarının değiştirilmesi nedeniyle tesbit edilen kusurlu durumların varlığı da güçlendirmeye olan talebin artmasında başlıca sebep olmuştur. Binaların güçlendirilmesine olan talebin artmasına rağmen, ülkemizde bu konuyla ilgili resmi bir şartname olmaması, yapılan projelerin doğruluğunun kontrolünü de zorlaştırmaktadır. Her ne kadar bu konuyla ilgili yayınlanan kitap ve makalelerde, güçlendirme analiz ve uygulamaları hakkında geniş bilgilere değinilsede, yapılan projelerin özellikle analizlerinde, kişilere göre farklı yorumlara rastlanmaktadır. Bu çalışmada, yapılarda uygulanabilecek güçlendirme yöntemleri üzerine bilgiler verilmiş ve yapı elemanlarında mevcut beton malzemesi ile eklenecek beton malzemesine ait elastisite modülü değişimlerinin, eleman iç kuvvetlerine etkisi sayısal örneklerle incelenmiştir, örneklerde, güçlendirmesi yapılacak yapı elemanının, mevcut beton ve yeni yapılacak beton elemanı elastisite modülleri dikkate alınarak modellenmesiyle, toplam kesit ve azaltılmış bir elastisite modülü kullanılarak modellenmesi arasında oluşan eleman eksenel yükü, moment ve kesme kuvveti ferklıhkları tablolarda gösterilmiştir. Sonuç bölümünde ise, çalışmada yeralan modellemelerde, eleman içersinde oluşan kuvvetlerin farkhhklannın önemi yorumlanmıştır.

Özet (Çeviri)

ra ABSTRACT After the big earthquake disasters that Turkey had experienced in recent years, in addition to the newly introduced Codes, the number of buildings that have been strengthen has increased. One of the major needs for the buildings to be strengthen is the lack of quality of the engineering service both during the project and the construction process, as well as the change of the use purpose of the building during time. Although the demand for the strengthening the structures is increasing day by day the control of the quality of the project and construction is insufficient because of the lack of Codes regarding to this issue. There are so many books and articles about the analysis and construction methods of the strengthening structures but especially in the analysis process there are some different ideas depending on the researcher. In this study some methods that are used in strengthening the structures has been mentioned. In addition to this the effect of the change of the modulus of elasticity of the newly added concrete on the internal forces of the structural members has been investigated. In the analysis the modulus of elasticity of the structural member that is strengthened has been taken as both for the existing a newly added concrete by using a proportion depending on their areas. In the other analysis the modulus of elasticity of the new section has been reduced. By using both type of analysis the change of the internal forces, axial force, shear force, bending moment, has been illustrated by tables. In the conclusion part comments on the effect of the modeling on the internal forces of the strengthened member has been said.

Benzer Tezler

  1. Seismic retrofit of full-scale substandard rectangular RC columns through cfrp jacketing and external steel ties

    LP kompozitler ile mevcut betonarme binalardaki dikdörtgen kesitli kolonların dayanım ve sünekliklerinin geliştirilmesi

    HAMID FARROKH GHATTE

    Doktora

    İngilizce

    İngilizce

    2016

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPER İLKİ

  2. Mevcut betonarme yapıların deprem performanslarının belirlenmesi ve viskoz akışkanlı sönümleyiciler ile güçlendirilmesi için artımsal analize dayalı bir algoritma

    An algorithm based on incremental analysis to evaluate performance and retrofit with viscous dampers of existing reinforced conrete structures

    YAVUZ DURGUN

    Doktora

    Türkçe

    Türkçe

    2013

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ERKAN ÖZER

  3. Çimento esaslı kompozit plakalarla güçlendirilmiş bölme duvarlarının kayma dayanımının belirlenmesi

    Determination of shear strength of infill walls strengthened by cement based composite plates

    MUSTAFA GÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    Deprem Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MUSTAFA GENÇOĞLU

  4. Improvement of the cyclic flexural capacity of RC columns with FRP reinforcement

    Lifli polimer donatılar kullanılarak betonarme kolonların çevrimsel yükler altında eğilme kapasitelerinin artırılması

    ENGİN CÜNEYT SEYHAN

    Doktora

    İngilizce

    İngilizce

    2016

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPER İLKİ

  5. Dolgu duvarlı BA çerçevelerin güçlendirilmesinde FRCM türü malzemelerin performansa katkısının deneysel araştırılması

    Experimental investigation on contribution of the FRCM materials to performance in strengthening reinforced concrete filled wall frames

    TAHA DEMİRCİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiErciyes Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ HİDAYET ÖZDEMİR